|
| 1 | BT ROADEarthwork excavation in all kinds of soils except hard rock requiring blasting, inclusive of shoring, strutting and baling out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing the surplus earth within compound in places as shown by the deptl.officers, clearing and leveling the site with initial lead of 10M and lift of 2M etc.Comp.SI.No.62-rate for 10m3 MDU-CORP-BUILDING DATA-P-18-SL No:1 TURIP 2022-23 SAVINGS FUND PHASE-1 DMA OFFICE |
| 2 | ProvidingofGranularSubbaseusingGradeImaterialsof table 400 -1 of Morth with minimum CBR 30 spreading in uniform layerswithmotorgraderonpreparedsurface,mixinbypalce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as pertechnicalspecificationandasdirectedbythedepartmental officers. Morth - Rev V No. 111,112,401, 900 MDU-CORP DATA-P-23-SL No:8 TURIP 2022-23 SAVINGS FUND PHASE-1 DMA OFFICE |
| 3 | Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm & 0.528m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in subbase/basecourse on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. MDU-CORP DATA-P-23-SL No:8 TURIP 2022-23 SAVINGS FUND PHASE-1 DMA OFFICE |
| 4 | Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev V Specifications MDU Road Data-2020-21-Pg - 21 TURIP 2022-23 SAVINGS FUND PHASE-1 DMA OFFICE |
| 5 | Providing and laying tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications MDU Road Data-2020-21-Pg - 21 |
| 6 | Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 TURIP 2022-23 SAVINGS FUND PHASE-1 DMA OFFICE |
| 7 | Providing and laying Bituminous Concrete to 30mm/40mm thick using 0.13 cum of 19.00 - 9.50mm, 0.17cum of 9.50 -2.36mm and 0.26cum of 2.36 and below with 50.30kgs of VG30 / VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTHRev-5. |
| 8 | Providing and laying of hot applied thermoplastic compound 205mm thick including reflect rising glass beads @ 250gms.per sqm.area.thickness of 2.5mm is exclusive of surface applied glass beads as per IRC :35. The finished surface to be level uniform and free from streadks sdand holes etc complete.(as per MORT & H Specification no803)MDU-CORP DATA-P-21-SL No:5 TURIP 2022-23 SAVINGS FUND PHASE-1 DMA OFFICE |
| 9 | CC ROADDismantling the existing for cement concrete road surface the debris clearing away from the site etc.complete.., TURIP 2022-23 SAVINGS FUND PHASE-1 DMA OFFICE |
| 10 | Plain Cement Concrete 1:1.5:3 (one cement,one and half fine aggregate sand three coarse aggregates) using 40mm size ISSHBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification TURIP 2022-23 SAVINGS FUND PHASE-1 DMA OFFICE |
| 11 | Providing and fixing Bitumen Pad for Exoansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification TURIP 2022-23 SAVINGS FUND PHASE-1 DMA OFFICE |
| 12 | Charges towards finishing the concrete surface with power traveler machine rate shall include the cost of fule charges hire for machine and labour charges for operation etc.,,TURIP 2022-23 SAVINGS FUND PHASE-1 DMA OFFICE |
| 13 | Supply of FRC Manhole 600 mm size dia cover with frame including cost of conveyance loading fixing the same etc complete TURIP 2022-23 SAVINGS FUND PHASE-1 DMA OFFICE |
| 14 | Manufacturing Supply and Fixing of Retro Reflective Road Name sign boardsinglearrowbigsizeout if wide anglecuble corner micro prismatic grade sheeting confirming to IRC 67:2010 & type XIstandardsofASTMD4956-09specificationsandfixedover 2mm thick aluminium sheet back support frame of stainless steel supportedby32NBstainlesssteelpipeallaroundand65NB pipe vertical post firmly fixed to the ground by means of properly designedfoundationwithM15gradecementconcrete 30cmX30cmX45cmcomplete.Theinformation messageshall be made out cut out letters in blue transparant overlay film as per IRC67-201Guidelines,7yearsprequalificationwarrentyfor Retro Reflective sheeting from the original sheeting manufacture & a certified copy of three years out door exposure report from an independent test lab for the product offered shall be submittedbythecontractor.ThesignboardshallbeRetro ReflectivetypeXI.TheRetroReflectivesheetingshouldhave manufacturesWATERMARKon the sheetingsurface for identification. Single Arrow Big Size 36\" X 18\" MDU-CORP DATA-P-24-SL No:23 TURIP 2022-23 SAVINGS FUND PHASE-1 DMA OFFICE |
| 15 | GST 18% |
