Orissa Tourism Development Corporation Limited has published Tender For Balance Work Of Shree Shree Baladev Jew Gud In Balasore District.. Submission Date for this Tender is 19-07-2023. Civil Work Tenders in balasore Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Civil works |
| 2 | Dismantling and removing R.C.C. columns, beams, slab, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50m lead.First floor |
| 3 | Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead.First floor |
| 4 | Providing, lifting, hoisting and laying Reinforced cement concrete of different RCC structure in foundation level ofM-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.First floor |
| 5 | a) Column & Beam |
| 6 | b) Roof slab |
| 7 | c) Lintel |
| 8 | d) Chajja |
| 9 | Providing, fixing and placing ofTor steel (HYSD) Fe-500(SAIL/TATA) for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, bindingwelding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost. First floor |
| 10 | Providing Fly Ash Brick masonry using fly ash brick of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.First floor |
| 11 | Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) (inside) with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as per specification and direction of Engineer-in-charge. |
| 12 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.First floor |
| 13 | Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning to all R.C.C surface including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.First floor |
| 14 | Providing vitrified tile flooring using Double Charge vitrified tiles of premium grade having thick of 8mm to 10mm conforming to IS 13756 of600mm x600mmcoloured /printed series(homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and , cost of all labour, sundries, T&P required for the work in all respect as per specification and direction of Engineer- in- charge.(Make: SOMANY/JONSON/NITCO/KAJARIA/OASIS OR EQUIVALENT) First floor |
| 15 | Providing 20mm thick and above 0.40 Sqm size granite tile flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge.First floor |
| 16 | Supplying, fitting and fixing of G.I. grills, grill gates with top and bottom rails ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( G.I. windows grills, grill gates, collapsible gates with top and bottom rails, square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost.)First floor |
| 17 | Supplying, fitting, fixing up window (sliding type) made up powder coated aluminum Section 9778, as windows frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in charge.(excluding cost of5mm thick black glass) |
| 18 | Providing fitting and fixing of5mm thick black glass to the above mentioned window including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete as per specification and direction of Engineer-in-charge. |
| 19 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, T & P etc. required for the complete in all respect as directed by the Engineer-in-charge. |
| 20 | Providing, supplying and fixing of 20mm, 25mm, 40mm, G.I pipe make TATA for Railing work including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete as per specification and direction of Engineer-in-charge. |
| 21 | Supplying, fitting and fixing of color coated trapezoidal sheet TRIMDEK 1015 profile sheet from TATA BLUESCOPE STEEL or any approved equivalent. The base metal sheet of 0.45mm thick. High Tensile steel with minimum 550MPa yield strength, metallic hot dip coated with aluminum zinc alloy of 55% aluminum 45% Zinc as per AS 1397 – Zincalume® AZ 150 (minimum 150grams as per square meters, total on both sides) with COLORBOND® - Polyester Based quality Paint conforming to AS/NZS 2728 class 3. The paint shall have a total coating thickness of nominal 35 micron (Nominal 20micron exterior coat on top surface and nominal primer coat) on both surfaces with approved color shade etc. complete. Accessories – Fasteners: The steel sheet shall be fastened with min.40Pm zinc coated or min 20Pm Zinc-Tin alloy coated, Hex head, self-drilling screw as per AS 3566 class 3 fasteners of approved make (Buildex of equivalent) with EPDM washer on each crest of sheet for connecting with purlin (or as per design) perpendicular to the sheeting and in the center of the corrugation of rib including cost of all materials, labour, all taxes, sundries, T & P and transportation complete in all respect as per design and drawing as directed by the Engineer-in- charge. |
| 22 | Providing & fixing factory made (Make :-Rajshri) internal PVC door frame of size 100mmx45mm with wall thickness of 5mm made out of extruded 5mm PVC foam sheet , meter cut at two corner & joined with two numbers 150mm long bracket of 15mmx15mm squire tube. The two vertical door profile are to be reinforced with 40mm x20mm tube of 19 gauge throughout the frame. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners. A minimum of 4 numbers of screws to be provided for is vertical member & minimum two numbers for horizontal members etc. complete as per specification and direction of Engineer –in-charge. |
| 23 | Finishing wall surface with Acrylic wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. |
| 24 | Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wallsmooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.First floor |
| 25 | Painting to external surface of building with two coats of weather coat over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.First floor |
| 26 | Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.First floor |
| 27 | PH Works |
| 28 | Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.- CON-041KN or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 29 | Supplying all materials, labour, T&P and fixing Health faucet of Jaquar Cat. No.- ALD 573or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 30 | Supplying all materials, labour, T&P and fixing Angle stop cock of Jaquar Cat. No.- CON-053KNor equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 31 | Supplying all materials, labour, T&P and fixing Towel ring of Jaquar Cat. No.- ACN 1121BNor equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 32 | Supplying all materials, labour, T&P and fixing Glass shelfof Jaquar Cat. No.-ACN-1171Nor equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 33 | Supplying all materials, labour, T&P and fixing pillar cockof Jaquar Cat. No.-CON-011KNor equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 34 | Supplying all materials, labour, T&P and fixing Soap caseof Jaquar Cat. No.-ACN-1131Nor equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 35 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes (selfit / ring fit type)with all PVCfittings of Finolex /Prince/Supreme make as per IS 13592to walls with nails, bobbins and wooden plugs or laying in trenches including all pipe fittings, jointing materials, tools plant, labour & all material, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. |
| 36 | 110 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 2.20 mm to 2.70 mm) |
| 37 | 75 mm dia PVC (SWR) pipe Class ‘A’ (with wall thick of 1.8 mm to 2.20 mm ) |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of ( AJAY/ ASHIRVAD/ ASTRAL) confirming to ASTM F442 Specific-2having thermal stability for hot & cold water supply SDR 11 , including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 39 | 20 mm dia |
| 40 | 25 mm dia |
| 41 | 32 mm dia |
| 42 | 40 mm dia |
| 43 | 50 mm dia |
| 44 | Providing and fixing 40mm dia gunmetal fullwayvalve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects as per direction of Engineer in Charge. |
| 45 | Providing and fixing 50mm dia gunmetal fullwayvalve of approved make and quality with all materials, labour, tools, plant, scafolding , making good the damages caused, complete in all respects as per direction of Engineer in Charge. |
| 46 | Providing EWC of Hindware Slick make size: 57.5 x 36 x 39 cm Cat. No.-20011etc complete or equivalent complete with fittings and seat cover, one no. hinged rail 76cm & 4 Nos. of grab rails 60cm brass brackets. etc all complete as per specification & fixing of plastic seat & cover for wash down water closet with chormium plated brass hinges and rubber buffers all complete as per specifications. |
| 47 | Providing Sleek Fresh Single Flush cistern of Hindware make size: 15 x 47.3x 34.2 cmetc complete or equivalentcomplete with fittings and seat cover, one no. hinged rail 76cm & 4 Nos. of grab rails 60cm brass brackets. etc all complete as per specification & fixing of plastic seat & cover for wash down water closet with chormium plated brass hinges and rubber buffers all complete as per specifications. |
| 48 | Providing Pedestal hand Basin size : 58 x 43 x 82 cm Hindware Mario make cat no: 10087 & 11003 etc complete or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. |
| 49 | ProvidingCounter topwash handbasin Hindware make cat no: 10091 etc complete or equivalenttype of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
