Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | Carryout the Renovation works in TNCSC godowncampuses at Ooty in Nilgiris District.Clearing Heavy Jungle |
| 3 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls, Plain Cement ConcreteFor AC Sheet Roofing |
| 4 | EARTH WORK excavation for foundation(for narrow excavation) in all classes of soils and sub soils to full depth, as may be directed except in hard rock, requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial life of 2 mts and clearing and leveling the site, etc., complete complying with standard specification |
| 5 | Supplying and filling in foundation and basement with clean M-Msand in layers not exceeding 150mm well watered rammed and consolidated including watering etc., complete complying with standard specification. |
| 6 | CEMENT CONCRETE 1:5:10(one cement , five Msand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed. |
| 7 | Reinforcement Cement Concrete 1:2:4 ( one cement, two Msand, four aggregate)using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishingand curing etc., complete complying with standard specifications and as directed.In Foundation and basement. |
| 8 | In Ground floor |
| 9 | Supplying and fabricating and placing in position M.S.grills for reinforcement for all RCC works, including cost of rods, straightening, bending , cracking , tying grills, with 18 gauge galvanished binding wire and placing the grills in position etc., .,complete complying with standard specifications and as directed. The steel rods along will be supplied by the corporation at site of work and the cost will be recovered at issue rate. |
| 10 | Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessaryJ / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers. |
| 11 | Labour charges for re-roofing AC sheet with necessary J / U bolts and nuts of 8mm dia of suitable length and providing one st of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed by the departmental officers. |
| 12 | Servicing the existing rolling shutter of size 1.80 x 2.60m such as spring tension adjustment, attending leaves repair works, locking adjustment, applying grease and kerosenewashing for easy uplifting including costof labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete and as directed by the departmental officers. |
| 13 | Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., CompleteFor plane surface such as Footing, Plinth Beam Grade Beam etc., |
| 14 | For plane surface such as RCC Slab, Sunshade, Floor slab etc., |
| 15 | Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat,and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers. |
| 16 | BRICK WORKin cement mortor 1:5 (one cement, five Msand) using best quality second class chamber burnt bricks/ Fly ash bricks ofsize 9\"x4 3/8\"x2 3/4\"for walls including cost of scaffolding curing, finishing etc.,complete complying with standard specifications and as directed. |
| 17 | Supplying and fixing in position 100mm x 50mm x9.4 kg channel for the face of RAT GUARD EDGING SLAB with MS bolts 16mm dis 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M 1:3 (one cement and three Msand) etc., complete includingpainting the exposed surface of MS channel with coats of ANTI CORROSIVE METALLIC NUT BROWN COLOUR PAINT over one coat red oxide primer etc., complete ( The required quantities of MS channel will be supplied departmentally and cost recovered at issue rate). |
| 18 | PLASTERING with cement mortor 1:5 (one cement and three Msand) 12mm thick including cost of conveyance of all materials to site and including all labour charges etc complete. |
| 19 | Special PLASTERING with cement mortor 1:3 (one cement and three Msand) 10mm thick including cost of conveyance of all materials to site and including all labour charges etc complete. |
| 20 | Manufacturing supplying and fixing in position of RCC jelly of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing , curing lifting, fixing in position etc., complete complying with standard specifications and as directed. |
| 21 | Supplying and fixing of UPVC ventilator (un-plasticized poly viny choloride) louvered ventilators of fromprofile size outer frame 60x58mm and shutter profiles size 60x78mm both profilesreinforced with GI 1mm 125 GSM and 100% corrosion free multi colored chamber section with wall thick of 2mm. The EPDM rubber (Black color) covered with all the edges frame shutters. The corners and joints to be welded and cleaned. Radiation pin headed glas 4mm thick should be provided to the louvers. The ventilator should be fixied to the wall with 100% packing with screws silicon packing round the frames. The Ventilator should got approved from the Engineer Incharge. |
| 22 | Supplying and fixing M.S Grill tospecial windows and ventilators etc using 20mmx6mm angle including cost of MS grill, one of red oxide and fixing in position etc. complete complying with Standard Specification and as directed. |
| 23 | Supplying and fixing of solid PVC door shutters using 19 gauges 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock, and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. |
| 24 | Supplying and fixing in position white glazedIndian Water Closet (Oriya type) of size 580 x 440 mm colour glazed earthern ware of approved quality and brand with “P”” or “S”trap conforming to BIS with Msand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one lime, two Msand, and five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to cast iron soil pipes by dismandling masonry / RCC works andmaking good the disturbed portion to original condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. ( The wter closet should be got approved by the Executive Engineer before use on works.) |
| 25 | Flooringwith colour ceramic tiles ofsize305x305x6mm laid over 20 mm thick cement mortar 1:3 ( one cement and thre Msand) base mortar over the existing slab/floor including cutting the tiles to the required size with special cutter wherever necessary laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 kg/sq.m etc.complete directed complying withstandard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works). |
| 26 | Dadooing walls with following best approved quality, colour glazed tiles of following sizes set in Cement Mortar 1:2 (One cement and two Msand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40Kg/sq.m. neatly in all floors, curing etc., complying with standard specification and as diredted by the departmental officers.300x200x6mm |
| 27 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no Msand to be used) to the proportion of brick jelly to lime being 32:12:5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jiggery water, etc., complete as per standard apecification and as directed by the Engineer incharge. |
| 28 | Finishing the top of roof with one course of pressed tiles of size 23x23x2 cm of approved quality in cement mortar 1:3 12mm thick with water proofing compound confirming of IS at 2% by weight of cement used and the top pointed with same mortar is mixed with red oxide to the full depth of tiles etc., complete complying with standard specification and as directed by the departmental officers |
| 29 | Renewing the broken glass panes of 4.00 mm thick plain glass with new glass panes of 4.00mm thick plaing glass of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers. |
| 30 | Paintingtwo coats ofplastered wall surface with ready mixedExterior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specificatio |
| 31 | White washing Two coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum,brushes scaffolding charges etc., etc., complete complying with standard specification and as directedby the departmental officers. |
| 32 | Painting old iron work with two coats of steel doors, windows, ventilators window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming cot etc., comple complying with standard specifications.(The paint should be got approved by Engineer in charge work before use on works). |
| 33 | Supply and fixing in position of best Indian make white / colour glazed eartherware lipped mouth flat back urinal of best quality and approved make of size 430mmx260mmx350mm with GI Pipe, 32mm dia bell mouth PVC Connection and waste pipe, 15mm dia GI Pipe of required length, 15mm dia GM Wheel valve, 15mm dia brass nipple 2 Nos and fixing the urinals in position with necessary TW plugs, Clamps, Screws etc., including dismantling masonry and redoing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc., complete complying with standard specifications and as directed by the departmental officers.(The Urinal should be got approved by the Executive Engineer before use on works) |
| 34 | Supplying and fixing Brass Chromium plated Towel Rail 600mm long and 20mm diameter with brackets of same materials including cost of teak wood plugs, CP screws etc., complete complying with standard specification and as directed by the departmental officers . |
| 35 | Construction of Manhole chamber of size e600 x 600 mmto a total height of 800 mm that is 200 mm bove ground level and 600 mm below gound level with base concrete of 100mm thick 1:5:10 over a Msand cushion of100 mm thick the chamber should beconstructed in brick masonry of 230mm thick in cement mortar with chamber bricks of size 9”x4 3/8”x 2 ¾”the inner sides of chamber is plastered with cement mortar 1:3 20mm thick outer chamber to a depth of 300mm plastered with cement mortar 1:5 12mm chamber iscovered with SRF cover slab 100 mm thick rate including cost of material labour etc., complete. |
| 36 | Supplying and fixing the following size of PVC pipes of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work.- 32mm dia PVC pipe |
| 37 | 25 mm dia PVC pipe |
| 38 | Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers.- Ladies Toilet110 mm dia PVC pipe |
| 39 | Supplying and fixing in position of best Indian make PVC water tank of 500 liters capacity confirming to ISI standards and as directed by the departmental officers including cost material and conveyance charges of material to work site etc., complete with standard specification. |
| 40 | Supplying and fixingwash basin of size 550 x 400 mm (with pedestal / without pedestat) withall accessories such as cast iron brackets 32mm dia brass CP waste coupling rubber plug and chain 32mm dia “B”class GI waste pipe with rubber plug and chain, 15 mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corosive paint including testingfor leakages etc.,complete complying with standard specificationand as directed by the departmental officers. ( The wash hand basin and specials should be got approved by the Executive Engineer before use on work. |
| 41 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4kg / sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly. Etc. complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of ܔclamp at the centre of the pipe line in addition to those for mnore than 3.0 metre pipe length etc., complete complying with standard specification . |
| 42 | Supplying and fixing AC ventilating shaft of 110 mm dia with 3 meter height includingcost of 110mm dia AC cylindrical cowl of best approved quality etc., complete complying with standard specification and as directed by the departmental officers. |
| 43 | Supplying and filling in basement with wetmix 250mm thickin layers of not exceeding 250mm thick, well watered, rammed andconsolidated including machineries for hire and runningcharges leader 5 Cum capacity, hire charges for tipper, water sprinkler,` vibratory roller all labour charges etc., complete complying with standard specification and as directed |
| 44 | WBM Providing and laying WBM mm compacted thickness with grade IImetalusing 1.00 cum of 53-22.40mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification. |
| 45 | WBM Providing and laying WBM mm compacted thickness with grade IIImetalusing 1.00 cum of 63-11.20mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification. |
| 46 | Carryout the Renovationspecial repair works in existingTNCSC Godown campus at Gudalur taluk inNilgiris District. Clearing Jungle |
| 47 | Dismantling, clearing away and carefully stacking materials useful for re-use for For AC sheet roofing |
| 48 | EARTH WORK excavation for foundation(for narrow excavation) in all classes of soils and sub soils to full depth, as may be directed except in hard rock, requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial life of 2 mts and clearing and leveling the site, etc., complete complying with standard specification |
| 49 | Supplying and filling in foundation and basement with clean M-Msand in layers not exceeding 150mm well watered rammed and consolidated including watering etc., complete complying with standard specification. |
| 50 | CEMENT CONCRETE 1:5:10(one cement, five Msand and ten aggregate)using 40mm gauge hard broken granite stone jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to received the floor, curing etc., complete complying with standard specifications( The rate is inclusive of necessary planking for paneling wherever necessary andand as directed by the departmental officers.Toilet black |
| 51 | Cement Concrete 1:2:4 ( one cement, two Msand, four aggregate)using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, but including laying, vibrating, with mechanical vibratos, finishing, curing etc, and providing fixtures like fan clamps in theRCC floor / roof slabs wherever necessary and bearing surface of walls, beams etc., shall be finished smooth with cement mortr 1:3 (one cement and three Msand) and Kraft paper laid over it without claiming extra, etc.,complete complying with standard specifications and as directed. In Foundation and Basement. |
| 52 | Ground floor |
| 53 | Supplying and fabricating and placing in position M.S.grills for reinforcement for all RCC works, including cost of rods, straightening, bending , cracking , tying grills, with 18 gauge galvanished binding wire and placing the grills in position etc., .,complete complying with standard specifications and as directed. The steel rods along will be supplied by the corporation at site of work and the cost will be recovered. |
| 54 | Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessaryJ / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers. |
| 55 | Labour charges for re-roofing AC sheet with necessary J / U bolts and nuts of 8mm dia of suitable length and providing one st of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed by the departmental officers. |
| 56 | Servicing the existing rolling shutter of size 1.80x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers. |
| 57 | Supplying and erecting centering for sides and sofits including necessary supports and strutting upto 3.29m height for plane surfaces as detailed below in all floors with all cross bracing using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at not more than 75 cm centre to centre etc., complete complying with the standard specification. (payment for centering shall be given after the – For plane surfaces such as RCC floor slab, roof slab, beams lintels, bed blocks, lading slab, waise. |
| 58 | Coloumn Footing plinth beam etc., |
| 59 | Supplying and fabrication of M.S.Angle section vertical stanction and forming truss used with M.S. square /Rectangular pipe and necessary M.S.angles for cleat. For purlins M.S.Square ppe has to be fabricated as per the corporation officers. |
| 60 | BRICK WORKin cement mortor 1:5 (one cement, five Msand) using best quality second class chamber burnt bricks/ Fly ash bricks ofsize 9\"x4 3/8\"x2 3/4\"for walls including cost of scaffolding curing, finishing etc.,complete complying with standard specifications and as directed. |
| 61 | Supplying and fixing in position 100mm x 50mm x9.4 kg channel for the face of RAT GUARD EDGING SLAB with MS bolts 16mm dis 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M 1:3 (one cement and three Msand) etc., complete includingpainting the exposed surface of MS channel with coats of ANTI CORROSIVE METALLIC NUT BROWN COLOUR PAINT over one coat red oxide primer etc., comple ( The required quantities of MS channel will be supplied departmentally and cost |
| 62 | PLASTERING with cement mortor 1:5 (one cement and three Msand) 12mm thick including cost of conveyance of all materials to site and including all labour charges etc complete. |
| 63 | Special PLASTERING with cement mortor 1:3 (one cement and three Msand) 10mm thick including cost of conveyance of all materials to site and including all labour charges etc complete. |
| 64 | Manufacturing supplying and fixing in position of RCC jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing , curing lifting, fixing in position etc., complete complying with standard specifications and as directed. |
| 65 | Supplying and fixing of UPVC ventilator (un-plasticized poly viny choloride) louvered ventilators of fromprofile size outer frame 60x58mm and shutter profiles size 60x78mm both profilesreinforced with GI 1mm 125 GSM and 100% corrosion free multi colored chamber section with wall thick of 2mm. The EPDM rubber (Black color) covered with all the edges frame shutters. The corners and joints to be welded and cleaned. Radiation pin headed glas 4mm thick should be provided to the louvers. The ventilator should be fixied to the wall with 100% packing with screws silicon packing round the frames. The Ventilator should got approved from the Engineer Incharge. |
| 66 | Supplying and fixing M.S.Grill to doors, special windows and ventilator etc using 20mm x 6mm as directed by the departmental oddixwea inclusive of cost of MS grill including one of red oxide and fixing in position etc., complete ( as per schedule of rate) Sl.No.125A _ office building & loading platform |
| 67 | Supplying and fixing of solid PVC door shutters using 19 gauges 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock, and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings |
| 68 | Supplying and fixing in position white glazedIndian Water Closet (Oriya type) of size 580 x 440 mm colour glazed earthern ware of approved quality and brand with “P”” or “S”trap conforming to BIS with Msand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one lime, two Msand, and five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to cast iron soil pipe by dismandling masonry / RCC works and making good the disturbed portion to original condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. ( The wter closet should be got approved by the Executive Engineer before use on works.) |
| 69 | Flooringwith colour ceramic tiles ofsize305x305x6mm laid over 20 mm thick cement mortar 1:3 ( one cement and thre Msand) base mortar over the existing slab/floor including cutting the tiles to the required size with special cutter wherever necessary laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 kg/sq.m etc.complete directed complying withstandard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works). |
| 70 | Dadooing walls with following best approved quality, colour glazed tiles of following sizes set in Cement Mortar 1:2 (One cement and two Msand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40Kg/sq.m. neatly in all floors, curing etc., complying with standard specification and as diredted by the departmental officers. 300x200x6mm. |
| 71 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no Msand to be used) to the proportion of brick jelly to lime being 32:12:5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jiggery water, etc., complete as per standard apecification and as directed by the Engineer incharge.Office |
| 72 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approval quality set in cement mortar 1:3 ( one cement and three Msand) 12mm thick mixed with wter proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers . |
| 73 | Renewing the broken glass panes of 4.00 mm thick plain glass with new glass panes of 4.00mm thick plaing glass of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers. |
| 74 | Painting two coats of plastered wall surface with ready mixed exterioir emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification |
| 75 | White washing Two coat with freshly burnt white shell lime in all floors including cost of shell lime, blue powder fevicol type gum,brushes scaffolding charges etc., etc., complete complying with standard specification and as directedby the departmental officers |
| 76 | Painting old iron work with two coats of steel doors, windows, ventilators window nbars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming cot etc., comple complying with standard specifications.(The paint should be got approved by Engineer in charge work before use on works). |
| 77 | Supplying and fixing of lipped mouth procelin flat back Urinalwith all accessories such as 32 mmdia bell mouth PVC connection, 15mm dia GM valve, 15mm dia B class waste water pipe, 15mm dia nylon connection, brass nipple etc., complete. |
| 78 | Supplying and fixing Brass Chromium plated Towel Rail 600mm long and 20mm diameter with brackets of same materials including cost of teak wood plugs, CP screws etc., complete complying with standard specification and as directed by the departmental officers |
| 79 | Construction of Manhole chamber of size e600 x 600 mmto a total height of 800 mm that is 200 mm bove ground level and 600 mm below gound level with base concrete of 100mm thick 1:5:10 over a Msand cushion of100 mm thick the chamber should beconstructed in brick masonry of 230mm thick in cement mortar with chamber bricks of size 9”x4 3/8”x 2 ¾”the inner sides of chamber is plastered with cement mortar 1:3 20mm thick outer chamber to a depth of 300mm plastered with cement mortar 1:5 12mm chamber iscovered with SRF cover slab 100 mm thick rate including cost of material labour etc., complete. |
| 80 | Supplying, and fixing the following size of PVC pipes of approved quality and variety conforming to pressure IS 4985. The rate is inclusive ofcost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixingthe PVCpipe as directed by the departmental officersetc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work.32mm dia PVC pipe |
| 81 | 25mm dia PVC pipe |
| 82 | Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers.- Ladies Toilet110 mm dia PVC pipe |
| 83 | Supplying and fixing in position of best Indian make PVC water tank of 500 liters capacity confirming to ISI standards and as directed by the departmental officers including cost material and conveyance charges of material to work site etc., complete with standard specification. |
| 84 | Supplying and fixingwash basin of size 550 x 400 mm (with pedestal / without pedestat) withall accessories such as cast iron brackets 32mm dia brass CP waste coupling rubber plug and chain 32mm dia “B”class GI waste pipe with rubber plug and chain, 15 mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corosive paint including testingfor leakages etc.,complete complying with standard specificationand as directed by the departmental |
| 85 | Supplying and fixing in position best approved pipe BIS quality PVC rainwater down fall pipe of 110mm dia having4 kg / sq.cm. including cost of necessary PVC shoe, PVC Bend, cast iron gratings of required dismeter andspecial clamps, brass screws nails, etd., for fixing cast iron gratings at the junction of parapet and the RCC roof slab including finishing neatly etc., The rate shall be inclusive of cost of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of U clamp at the centre of the pipe line in addition to those for more than 3.00mm pipe length etc., complete complying with standard specification.(The PVC pipes should be got approved by the Executive Engineer before use on works). |
| 86 | Supplying and fixing AC ventilating shaft of 110 mm dia with 3 meter height includingcost of 110mm dia AC cylindrical cowl of best approved quality etc., complete complying with standard specification and as directed by the departmental officers. |
| 87 | Carryout the Renovationspecial repair works in existingTNCSC Godown campus at KothagiriTaluk inNilgiris DistrictClearing Heavy Jungle |
| 88 | Dismantling and clearing away and carefully stacking materials for re-useFor AC sheet Roofing. |
| 89 | EARTH WORK excavation for foundation(for narrow excavation) in all classes of soils and sub soils to full depth, as may be directed except in hard rock, requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial life of 2 mts and clearing and leveling the site, etc., complete complying with standard specification |
| 90 | Supplying and filling in foundation and basement with clean M-Msand in layers not exceeding 150mm well watered rammed and consolidated including watering etc., complete complying with standard specification. |
| 91 | CEMENT CONCRETE 1:5:10(one cement, five Msand and ten aggregate)using 40mm gauge HBG stone jelly including cost of all materials and labour charges etc., complete |
| 92 | Cement Concrete 1:2:4 (One Cement, Two crushed stone Msand and Four hard broken stone jelly) using 20mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing curingetc and providing fixtures like fan clamps in the RCC floor/roof slabs, wherever necessary and bearing surfaces of walls, beams etc., shall be finished smooth with cement mortar 1:3 (one cement and three Msand) and kraft paper laid over itwithout claiming extra etc., complete complying with standard specifications and as directed by the departmental officers.In Foundation basement. |
| 93 | Ground floor |
| 94 | Supplying and fabricating and placing in position M.S.grills for reinforcement for all RCC works, including cost of rods, straightening, bending , cracking , tying grills, with 18 gauge galvanished binding wire and placing the grills in position etc., .,complete complying with standard specifications and as directed. The steel rods along will be supplied by the corporation at site of work and the cost will be recovered at issue rate. |
| 95 | Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessaryJ / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers |
| 96 | Labour charges for re-roofing AC sheet with necessary J / U bolts and nuts of 8mm dia of suitable length and providing one st of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed by the departmental officers. |
| 97 | Servicing the existing rolling shutter of size 1.80 x 2.60m such as spring tension adjustment, attending leaves repair works, locking adjustment, applying grease and kerosenewashing for easy uplifting including costof labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete and as directed by the departmental officers. |
| 98 | Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., CompleteFor plane surface such as Footing, Plinth Beam Grade Beam etc., |
| 99 | For plane surface such as RCC Slab, Sunshade, Floor slab etc., |
| 100 | Supplying and fabrication of M.S.Angle section vertical stanction and forming truss used with M.S. square /Rectangular pipe and necessary M.S.angles for cleat. For purlins M.S.Square ppe has to be fabricated as per the corporation officers. |
| 101 | Brick work in following cement mortar 1:5 (One cement five M.sand using best quality II class table moulded chamber burnt bricks of size 9”x4-1/2”x3” for foundation and basement including curing etc., complete complying with standard specifications. |
| 102 | Supplying and fixing in position 100mm x 50mm x9.4 kg channel for the face of RAT GUARD EDGING SLAB with MS bolts 16mm dis 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M 1:3 (one cement and three Msand) etc., complete includingpainting the exposed surface of MS channel with coats of ANTI CORROSIVE METALLIC NUT BROWN COLOUR PAINT over one coat red oxide primer etc., comple ( The required quantities of MS channel will be supplied departmentally and cost recovered at issue rate,) |
| 103 | PLASTERING with cement mortor 1:5 (one cement and five Msand) 12mm thick including costand conveyance of all materials to site, loading and unloading charges and labour charges for mixing laying and curing etc., complete complying with standard specification and as directed. |
| 104 | Special PLASTERING with cement mortor 1:3 (one cement and three Msand) 10mm thick including cost of conveyance of all materials to site and including all labour charges etc complete. |
| 105 | Manufacturing supplying and fixing in position of RCC jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing , curing lifting, fixing in position etc., complete complying with standard specifications and as directed. |
| 106 | Supplying and fixing of UPVC ventilator (un-plasticized poly viny choloride) louvered ventilators of fromprofile size outer frame 60x58mm and shutter profiles size 60x78mm both profilesreinforced with GI 1mm 125 GSM and 100% corrosion free multi colored chamber section with wall thick of 2mm. The EPDM rubber (Black color) covered with all the edges frame shutters. The corners and joints to be welded and cleaned. Radiation pin headed glas 4mm thick should be provided to the louvers. The ventilator should be fixied to the wall with 100% packing with screws silicon packing round the frames. The Ventilator should got approved from the Engineer Incharge. |
| 107 | Supplying and fixing M.S.Grill to doors, special windows and ventilator etc using 20mm x 6mm as directed by the departmental oddixwea inclusive of cost of MS grill including one of red oxide and fixing in position etc., complete ( as per schedule of rate) |
| 108 | Supplying and fixing of solid PVC door shutters using 19 gauges 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock, and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. |
| 109 | Supplying and fixing in position white glazedIndian Water Closet (Oriya type) of size 580 x 440 mm colour glazed earthern ware of approved quality and brand with “P”” or “S”trap conforming to BIS with Msand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one lime, two Msand, and five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to cast iron soil pipes by dismandling masonry / RCC works and making good the disturbed portion to original condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. ( The wter closet should be got approved by the Executive Engineer before use on works.) |
| 110 | Flooringwith colour ceramic tiles ofsize305x305x6mm laid over 20 mm thick cement mortar 1:3 ( one cement and thre Msand) base mortar over the existing slab/floor including cutting the tiles to the required size with special cutter wherever necessary laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 kg/sq.m etc.complete directed complying withstandard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works). |
| 111 | Dadooing walls with following best approved quality, colour glazed tiles of following sizes set in Cement Mortar 1:2 (One cement and two Msand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40Kg/sq.m. neatly in all floors, curing etc., complying with standard specification and as diredted by the departmental officers.300x200x6mm |
| 112 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no Msand to be used) to the proportion of brick jelly to lime being 32:12:5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jiggery water, etc., complete as per standard specification and as directed by thedepartmental officers. |
| 113 | Finishing the top of roof with one course of pressed tiles of size 23x23x2 cm of approved quality in cement mortar 1:3 12mm thick with water proofing compound confirming of IS at 2% by weight of cement used and the top pointed with same mortar is mixed with red oxide to the full depth of tiles etc., complete complying with standard specification and as directed by the departmental officers. |
| 114 | Renewing the broken glass panes of 4.00 mm thick plain glass with new glass panes of 4.00mm thick plaing glass of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers. |
| 115 | Painting two coats of old plastered wall surface with ready mixed exterioir emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification |
| 116 | White washing Two coat with freshly burnt white sheel lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges etc., complete complying with standard specification andas direceted by the departmental officers |
| 117 | Painting old iron work with two coats of steel doors, windows, ventilators window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming cot etc., comple complying with standard specifications.(The paint should be got approved by Engineer in charge work before use on works). |
| 118 | Supplying and fixing of lipped mouth procelin flat back Urinalwith all accessories such as 32 mmdia bell mouth PVC connection, 15mm dia GM valve, 15mm dia B class waste water pipe, 15mm dia nylon connection, brass nipple etc., complete. |
| 119 | Supplying and fixing Brass Chromium plated Towel Rail 600mm long and 20mm diameter with brackets of same materials including cost of teak wood plugs, CP screws etc., complete complying with standard specification and as directed by the departmental officers . |
| 120 | Construction of Manhole chamber of size e600 x 600 mmto a total height of 800 mm that is 200 mm bove ground level and 600 mm below gound level with base concrete of 100mm thick 1:5:10 over a Msand cushion of100 mm thick the chamber should beconstructed in brick masonry of 230mm thick in cement mortar with chamber bricks of size 9”x4 3/8”x 2 ¾”the inner sides of chamber is plastered with cement mortar 1:3 20mm thick outer chamber to a depth of 300mm plastered with cement mortar 1:5 12mm chamber iscovered with SRF cover slab 100 mm thick rate including cost of material labour etc., complete. |
| 121 | Supplying and fixing the following size of PVC pipes of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work.- 32mm dia PVC pipe |
| 122 | 25 mm dia PVC pipe |
| 123 | Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers.- Ladies Toilet110 mm dia PVC pipe |
| 124 | Supplying and fixing in position of best Indian make PVC water tank of 500 liters capacity confirming to ISI standards and as directed by the departmental officers including cost material and conveyance charges of material to work site etc., complete with standard specification. |
| 125 | Supplying and fixingwash basin of size 550 x 400 mm (with pedestal / without pedestat) withall accessories such as cast iron brackets 32mm dia brass CP waste coupling rubber plug and chain 32mm dia “B”class GI waste pipe with rubber plug and chain, 15 mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corosive paint including testingfor leakages etc.,complete complying with standard specificationand as directed by the departmental officers. ( The wash hand basin and specials should be got approved by the Executive Engineer before use on work – office building & loading platform |
| 126 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4kg / sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly. Etc. complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of Ü”clamp at the centre of the pipe line in addition to those for mnore than 3.0 metre pipe length etc., complete complying with standard specification . – office building & loading platform |
| 127 | Supplying and fixing AC ventilating shaft of 110 mm dia with 3 meter height includingcost of 110mm dia AC cylindrical cowl of best approved quality etc., complete complying with standard specification and as directed by the departmental officers. |
| 128 | Carryout the Renovationspecial repair works in existingTNCSC Godown campus at CoonoorTaluk inNilgiris District. Dismantling and clearing away For AC sheet Roofing. |
| 129 | EARTH WORK excavation for foundation(for narrow excavation) in all classes of soils and sub soils to full depth, as may be directed except in hard rock, requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial life of 2 mts and clearing and leveling the site, etc., complete complying with standard specification Toilet block |
| 130 | Supplying and filling in foundation and basement with clean Msand in layers not exceeding 150mm well watered rammed and consolidated including watering etc., complete complying with standard specification.Toilet block |
| 131 | CEMENT CONCRETE 1:5:10(one cement, five Msand and ten aggregate)using 40mm gauge HBG stone jelly including cost of all materials and labour charges etc., complete |
| 132 | Cement Concrete 1:2:4 (One Cement, Two crushed stone Msand and Four hard broken stone jelly) using 20mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing curingetc and providing fixtures like fan clamps in the RCC floor/roof slabs, wherever necessary and bearing surfaces of walls, beams etc., shall be finished smooth with cement mortar 1:3 (one cement and three Msand) and kraft paper laid over itwithout claiming extra etc., complete complying with standard specifications and as directed by the departmental officers.In foundation and basement |
| 133 | Ground floor |
| 134 | Supplying and fabricating and placing in position M.S.grills for reinforcement for all RCC works, including cost of rods, straightening, bending , cracking , tying grills, with 18 gauge galvanished binding wire and placing the grills in position etc., .,complete complying with standard specifications and as directed. The steel rods along will be supplied by the corporation at site of work and the cost will be recovered at issue rate.Loading platform |
| 135 | Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessaryJ / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers |
| 136 | Labour charges for re-roofing AC sheet with necessary J / U bolts and nuts of 8mm dia of suitable length and providing one st of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed by the departmental officers. |
| 137 | Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers. |
| 138 | Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., CompleteColoumn Footing, Plinth beam etc., |
| 139 | Sunshad, roof slab etc, lintel |
| 140 | Coloumn square, Rectangular or round |
| 141 | Supplying and fabrication of M.S.Angle section vertical stanction and forming truss used with M.S. square /Rectangular pipe and necessary M.S.angles for cleat. For purlins M.S.Square ppe has to be fabricated as per the corporation officers. |
| 142 | Brick work in following cement mortar using best quality II class table moulded chamber burnt bricks of size 9”x4-1/2”x3” for foundation and basement including curing etc., complete complying with standard specifications.In foundation and basement. |
| 143 | Supplying and fixing in position 100mm x 50mm x9.4 kg channel for the face of RAT GUARD EDGING SLAB with MS bolts 16mm dis 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M 1:3 (one cement and three Msand) etc., complete includingpainting the exposed surface of MS channel with coats of ANTI CORROSIVE METALLIC NUT BROWN COLOUR PAINT over one coat red oxide primer etc., comple ( The required quantities of MS channel will be supplied departmentally and cost recovered at issue rate,) |
| 144 | PLASTERING with cement mortor 1:5 (one cement and five Msand) 12mm thick including costand conveyance of all materials to site, loading and unloading charges and labour charges for mixing laying and curing etc., complete complying with standard specification and as directed. |
| 145 | Special PLASTERING with cement mortor 1:3 (one cement and three Msand) 10mm thick including cost of conveyance of all materials to site and including all labour charges etc complete. |
| 146 | Manufacturing supplying and fixing in position of RCC jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing , curing lifting, fixing in position etc., complete complying with standard specifications and as directed. |
| 147 | Supplying and fixing of UPVC ventilator (un-plasticized poly viny choloride) louvered ventilators of fromprofile size outer frame 60x58mm and shutter profiles size 60x78mm both profilesreinforced with GI 1mm 125 GSM and 100% corrosion free multi colored chamber section with wall thick of 2mm. The EPDM rubber (Black color) covered with all the edges frame shutters. The corners and joints to be welded and cleaned. Radiation pin headed glas 4mm thick should be provided to the louvers. The ventilator should be fixied to the wall with 100% packing with screws silicon packing round the frames. The Ventilator should got approved from the Engineer Incharge. |
| 148 | Supplying and fixing M.S.Grill to doors, special windows and ventilator etc using 20mm x 6mm as directed by the departmental oddixwea inclusive of cost of MS grill including one of red oxide and fixing in position etc., complete ( as per schedule of rate) |
| 149 | Supplying and fixing of solid PVC door shutters using 19 gauges 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock, and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. |
| 150 | Supplying and fixing in position white glazedIndian Water Closet (Oriya type) of size 580 x 440 mm colour glazed earthern ware of approved quality and brand with “P”” or “S”trap conforming to BIS with Msand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one lime, two Msand, and five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to cast iron soil pipes by dismandling masonry / RCC works and making good the disturbed portion to original condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. ( The wter closet should be got approved by the Executive Engineer before use on works.) |
| 151 | Flooringwith colour ceramic tiles ofsize305x305x6mm laid over 20 mm thick cement mortar 1:3 ( one cement and thre Msand) base mortar over the existing slab/floor including cutting the tiles to the required size with special cutter wherever necessary laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 kg/sq.m etc.complete directed complying withstandard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works). |
| 152 | Dadooing walls with following best approved quality, colour glazed tiles of following sizes set in Cement Mortar 1:2 (One cement and two Msand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40Kg/sq.m. neatly in all floors, curing etc., complying with standard specification and as diredted by the departmental officers.300x200x6mm |
| 153 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no Msand to be used) to the proportion of brick jelly to lime being 32:12:5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jiggery water, etc., complete as per standard specification and as directed by thedepartmental officers. |
| 154 | Finishing the top of roof with one course of pressed tiles of size 23x23x2 cm of approved quality in cement mortar 1:3 12mm thick with water proofing compound confirming of IS at 2% by weight of cement used and the top pointed with same mortar is mixed with red oxide to the full depth of tiles etc., complete complying with standard specification and as directed by the departmental officers. |
| 155 | Renewing the broken glass panes of 4.00 mm thick plain glass with new glass panes of 4.00mm thick plaing glass of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers. |
| 156 | Painting two coats of old plastered wall surface with ready mixed exterioir emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 157 | White washing Two coat with freshly burnt white sheel lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges etc., complete complying with standard specification andas direceted by the departmental officers |
| 158 | Painting old iron work with two coats of steel doors, windows, ventilators window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming cot etc., comple complying with standard specifications.(The paint should be got approved by Engineer in charge work before use on works). |
| 159 | Supply and fixing in position of best Indian make white / colour glazed eartherware lipped mouth flat back urinal of best quality and approved make of size 430mmx260mmx350mm with GI Pipe, 32mm dia bell mouth PVC Connection and waste pipe, 15mm dia GI Pipe of required length, 15mm dia GM Wheel valve, 15mm dia brass nipple 2 Nos and fixing the urinals in position with necessary TW plugs, Clamps, Screws etc., including dismantling masonry and redoing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc., complete complying with standard specifications and as directed by the departmental officers.(The Urinal should be got approved by the Executive Engineer before use on works) |
| 160 | Supplying and fixing Brass Chromium plated Towel Rail 600mm long and 20mm diameter with brackets of same materials including cost of teak wood plugs, CP screws etc., complete complying with standard specification and as directed by the departmental officers . |
| 161 | Construction of Manhole chamber of size e600 x 600 mmto a total height of 800 mm that is 200 mm bove ground level and 600 mm below gound level with base concrete of 100mm thick 1:5:10 over a Msand cushion of100 mm thick the chamber should beconstructed in brick masonry of 230mm thick in cement mortar with chamber bricks of size 9”x4 3/8”x 2 ¾”the inner sides of chamber is plastered with cement mortar 1:3 20mm thick outer chamber to a depth of 300mm plastered with cement mortar 1:5 12mm chamber iscovered with SRF cover slab 100 mm thick rate including cost of material labour etc., complete. |
| 162 | Supplying and fixing the following size of PVC pipes of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work.- 32mm dia PVC pipe |
| 163 | 25 mm dia PVC pipe |
| 164 | Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers.110 mm dia PVC pipe |
| 165 | Supplying and fixing in position of best Indian make PVC water tank of 500 liters capacity confirming to ISI standards and as directed by the departmental officers including cost material and conveyance charges of material to work site etc., complete with standard specification. |
| 166 | Supplying and fixingwash basin of size 550 x 400 mm (with pedestal / without pedestat) withall accessories such as cast iron brackets 32mm dia brass CP waste coupling rubber plug and chain 32mm dia “B”class GI waste pipe with rubber plug and chain, 15 mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corosive paint including testingfor leakages etc.,complete complying with standard specificationand as directed by the departmental officers. ( The wash hand basin and specials should be got approved by the Executive Engineer before use on work. |
| 167 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4kg / sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly. Etc. complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of Ü”clamp at the centre of the pipe line in addition to those for mnore than 3.0 metre pipe length etc., complete complying with standard specification . – office building & loading platform |
| 168 | Supplying and fixing AC ventilating shaft of 110 mm dia with 3 meter height includingcost of 110mm dia AC cylindrical cowl of best approved quality etc., complete complying with standard specification and as directed by the departmental officers. |
| 169 | Supplying and filling in basement with wetmix 250mm thickin layers of not exceeding 250mm thick, well watered, rammed andconsolidated including machineries for hire and runningcharges leader 5 Cum capacity, hire charges for tipper, water sprinkler,` vibratory roller all labour charges etc., complete complying with standard specification and as directed |
| 170 | Supplying and fixing of Bitumen pad 12mm thick and150mm width at fixing of 20 m concrete surface including all charges etc., complete. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
