|
| 1 | Design, Supply and Double chamber Cremation Furnace LPG Burner fitting in Alternation work.Erection commissioning of LPG Burner System for Requirement of Cremation Furnaceof having 6 No’s Burners (Both side – Each 3) of rating 6 to 7.5kg/hrs and also necessary pipe lines, controls, Manifold, regulators and etc., |
| 2 | Dismantling and replacement of Gas Cleaning System (GCS) shall have ash Extractor before the Furnace for the removal ash from the producer Gas and shall have Venture Scrubbing arrangement after the Furnace capable of removing fine dust particulars throw wet washing the venture scrubber shall be connected to a wash column for Gaswater separation wash column shall be MS of 4mm thick plate suitably Manufactured. |
| 3 | Dismantling and Replacement of Supply & Construction of High Alumina (60%) Standard Bricks (9”x4”x3”), Cost-iron Body Bricks, Fire clay and Super refractory castable instulationwork. |
| 4 | Furnace Manual Operating Door Main soft Bearing with cover Block, Handle Soft with Bearing & 20mm Chain with Spracket wheel fully change and Servicework. |
| 5 | Centrifugal pump of suitable MoC to circulate to Mild Alkaline water through the Venturi scrubber at a rate of not less than 2 Lit/s with a Discharge pressure Head of 3Kg.cm2(min) in the Venturi and SuitablePlumbing work. |
| 6 | Dismantling and replacement of Double Chamber Cremation Furnace to Venturi Scrubber, Venturi Scrubber to centrifugal fan (5HP), Centrifugal fan to Chimney connection Suitable Pipe line work. |
| 7 | Cost for Overall service & Machinery painting work & Electrical Panel Board. |
| 8 | Brick work in C.M 1:5 mix using second class ground moulded bricks of size 9\"x43/8\"x2 3/4\"with including cost and conveyance of all materials and including all labour charges etc complete as per specification |
| 9 | Plastering in C.M 1:5mix-12 mm thick in all floors with including cost and conveyance of all materials and including all labour charges etc complete (S I 306) |
| 10 | Supplying and fixing of MS grills with Door and windows with one coat of Red oxide with primer including all costs such as welding, grinding and fabrication charges, cost and conveynace of all materials to site etc, compete as per standard specification. |
| 11 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 12 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 13 | Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900 |
| 14 | Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying of83mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stone dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 15 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement |
| 16 | Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 17 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 18 | Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulatedunshealhed SC.Cu.conductor of1100V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessorieswith TW switch box with 5A F.T. switch inflush with wall, coveredwith hylum sheet of 3mm thick with painting of suitable colour for open PVClight/fan point(For Electronic regulator) (5 pointsper coil). SD 22 |
| 19 | Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated single core unshealhed copper conductor cable of 1100V grade in suitable heavygauge MS conduit pipeonwall and ceiling with M.S. accessories inflush with wall with 150mm x 100 mm x 75mm MS switchbox with 3mm thick hylum sheet cover for 5A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point. SD 12 |
| 20 | Supply and fixing of single box type 4feet 36 W flu fitting complete with electronic ballast with TW round blockson wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 87 |
| 21 | Supply and fixing of 1200 mm (48\") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18\") SD-106 |
| 22 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mmfromfinishedfloorlevelweldedto38mmdia StainlessSteelpipepostof1.00mmthick asverticalat 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete.The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete As per PWD SOR |
| 23 | Providing Entrance Name board using I angle frames and support post with finishing Aluminum composite panel base plate and snickering letter cutting and fixing all in night vision flickering types including cost of allmaterials and including all labour charges etc complete |
| 24 | Supply, Delivery and Providing Three Seater back slope Granite stiff sitting benches 5 feet in length 1.50 feet width 600x450x100 mm size Hard Granite slab side walls, 150x45x100 mm size bench slab back slope slab including cost and conveyance and fixing in position etc complete |
| 25 | Supply and Fixing of 48 W LED Street Light Outdoor Fittings as per PWD SOR P.No.122 |
| 26 | Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point. SD -39 |
| 27 | GST18% |
