Public Works Department-PWD has published Tender For Renovation Of Bathroom In Office Of The Soil Survey Office Building At Talab Tillo Jammu. Submission Date for this Tender is 13-07-2023. Toilet Bathroom Tenders in Jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing /anelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portionAnodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
2 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
3 | Providing and fixing assosaries for windos of approved brand and manufacture |
4 | Providing and fixing of Aluminium Handel 8"" |
5 | Providing and fixing of Aluminium Tower Bolt 6"" |
6 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
7 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead |
8 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
9 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
10 | Labour engaged for dismanteling of old sanatary fitting |
11 | Labour engaged for disconnecting and again connection electrical fittings fan |
12 | electrication |
13 | electrication helper |
14 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
15 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
16 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
17 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar |
18 | Half brick masonry with common burnt clay (non-modular) bricks oflass designation 7.5 in foundations and plinth including curing in : Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
19 | Extra for half Brick masonry in superstructure above plinth level upto floor V level |
20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
21 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
22 | Providing 32 mm dia. C.P. brass trap |
23 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Flexible pipe32 mm dia |
24 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
25 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
26 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge |
27 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
28 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
29 | Providing and fixing toilet paper holder Vitreous china |
30 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
31 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour,eighing not less than 88 gms |
32 | Labour engaged for disconnecting and again connection G.I Pipes fittings |
33 | fitter |
34 | helper |
35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing |
36 | 20mm nominal outer dia pipes |
37 | 15mm nominal outer dia pipes |
38 | Providing and fixing PPR Unions |
39 | PPR Union 20mm |
40 | PPR Union 25mm |
41 | Providing and fixing sanatary fitting assosaries for (PVC) under ground Sludge pipes (LMR) items to be pay as per actual |
42 | Sear P- Traps 4"" |
43 | Flow Traps 3"" |
44 | Reducer 4"" x 3"" |
45 | Bends4"" |
46 | Tee 4"" |
47 | Providing and fixing sanatary fitting assosaries for (CPVC) Pipes for water pipes(LMR) items to be pay as per actual |
48 | Elbow Plain1"" |
49 | Elbow Brass1"" x 1/2"" |
50 | Tee CPVC Plain |
51 | Tee CPVC Brass 1"" x1/2"" |
52 | Socket Plain1"" |
53 | Main tee brass 1"" x 1" |
54 | Angel Valve |
55 | Providing and fixing Soil waste and vent pipes 100 mm dia PVC |
56 | Providing and fixing bend of required degree with access door insertion rubber washer 3mm thick bolts and nuts complete 100mm dia PVC |
57 | Providing and fixing heel rest sanitary bend 100mm dia |
58 | Providing and fixing single equal plain junction of required degree with accessdoor insertion rubber washer 3mm thick bolts and nuts complete 100 x 100 x 100mm |
59 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms |
60 | Providing and fixing and instlation of exast fans for bath rooms |
61 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes110 mm diametre |
62 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc.150 mm dia. |
63 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. |
64 | engaging mech. Operated vehicle mointed traper monted suctan pump for clearing of septic tank |
65 | engaging labour for removal of unhyaganic mulba for the septic tank and periphary |
66 | Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete. |
67 | Stone aggregate above 40mm size/Sand for an avg. lead of 10 Kms. |
68 | Bricksfor an avg. lead of 15 Kms |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail