Tender For Tcmc - Providing Infrastructure Facilities At Adhaar Centre And Collection Centre In Pallavaram Office Premises (Zone No.02), Pallavaram-Tamil Nadu
TDR : 38465874
Tender Notice
BOQ
Expired
Pallavaram
Tamil Nadu
Tender For Tcmc - Providing Infrastructure Facilities At Adhaar Centre And Collection Centre In Pallavaram Office Premises (Zone No.02)
Name of Work: Providing Infrastructure Facilities at Adhaar Centre and Collection Centre in Pallavaram office Premises
Sl. No.
Item Description
1
Supplying and fixing in position of FALSE CEILING ARRANGEMENTS with aluminium anodised \" T\" Section and \"L\" angle frame work of grid size 60x60cm with aluminium T section 25x25x2.8 mm @ 0.37 Kg/m and \"L\" angle of size 25x25x2mm @ 0.272 Kg/m thick and the same is supported @ suitable intervals by adjustable type 6mm dia MS rod with suitable threaded nuts suspended rods hung from ceiling at 120cm c/c in both directions and fixing 60x60cmx20mm thick thermocole in the grid so as to give a seat to false ceiling including painting the 6mm dia MS rod etc., complete complying with standard specifications. Necessary opening and arrangements for fixing electrical fittings should be provided with suitable frame work etc., complete
2
Providing and fixing of Aluminium Composite Panel ( ACP ) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg / sq.m and fabricated fixed at all level elevation and heights . The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is - 63400 rate shall included to fix the main frame with necessary clamps , fasteners , bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 ( H9 ) grade conforming to BS 4174 ( or ) IS 8147. Rate shall included 4mm thick ACP sheet ( 0.25 +3.5+ 0.25 ) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer
3
Supply and fixing of single box type 4\"40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specificationsSD 88
4
Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated single core unshealhed copper conductor cable of 1100V grade in suitable heavygauge MS conduit pipeonwall and ceiling with M.S. accessories inflush with wall with 150mm x 100 mm x 75mm MS switchbox with 3mm thick hylum sheet cover for 5A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point. 1224.4 SD-12
5
Operation and Maintenance for 1.00 ton to 2.00 ton capacity including cleaning Air filter for every month, cleaning drain pipe for cleaning for every four months, change controller batteries for every year, for outdoor unit, cleaning outdoor coil from outside for every four months, cleaning outdoor coil from inside blow air over electric points, electric connection tightening, clean fan wheel, check for tightening and clean and drain pan for every three months. The compressor and Gas filling has to be check for every mouth and report in to the departmental officers
6
Supply and fixing ofWall Mounting Fan of Size 450mm Sweep complete without provision of hole in the wall
7
Supply and Delivery of 3 seater stainless steel benches with arms Confirming to grade 202, similar to HC IS, having nickel contents less than 1% perforated in regular shape 1cm x 1cm having perforation 49 X 49(seat and back], Hand rest on all three seats. Overall length of bench 60” X 64.5”(hand to hand) height, bottom to seat level 18” overall height 36” X 37.5” Weight 38.5-39.5 kgs Approx, plate width 16\" seat.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
