Tender For Construction Of Public Distribution Shop At Pallavan Nagarin Tiruvannamalai Municipality
Tender Value
16.20 Lakhs
Estimated cost
Bid Submission
06 Jul 2023
0 days left
EMD
16200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thiruvannamalai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Public Distribution Shop At Pallavan Nagarin Tiruvannamalai Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Earth Work Excavation for foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNDSS23 & 24, V, VI (S2), VII, 9,10 |
| 2 | Supplying and filling in basement with filling M - Sand in layer of not more than 15 cm thick well rammed etc., complete. |
| 3 | Supplying and filling in foundation andbasement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 4 | Cement concrete 1:4:8 mix ( one cement four sand and eight aggregate)using 40mm gauge handbroken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying withstandard specfication |
| 5 | Supplying and errecting centering to sides and soffits including supports and struttingfor drainage sides andculvert body wall sidesusing 90cm x 60cm and B.G 10 stifenedwith welded mild steel angles of size 25mm x 25mm x 3mm for boardinglaid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification. TNDSS NO: 30&86 - Grade beam |
| 6 | Slab & Beam |
| 7 | Column |
| 8 | Reinforced Cement concrete M20 grade1:1/2 :3 (one part of cement one and halfpart of sand and three part of aggregate )using 20mm gauge machine broken hard granite stone jelly for all RCCitemsof worksexcluding cost of TMT rod, centering , struuting but including cost of mixing placing the concrete in postionvibrating cosolidating finishing and curing the concrete etc complete complying the standard specifications. 30 V, VI (S5) VII & 13 |
| 9 | Supplying ribbed tor steel rodsincluding cutting cranking fabricating assembling laying in exact position tying with soft steel wire 16 or 18 BWG etc. complete for all RCC Works.as per the design given including cost ofsteel and binding wire also in all floors as per standard specification. Steel Calculations are as per TN PWD Buildings AEE/T3/195360/89 dated 30.07.1990 |
| 10 | Brick work in CM 1:5 (one cement & five sand) using IIclass ground moulded bricks of size 9\"X43/8\"X 23/4\" standard specification including finishing, curing,etc., complete complying with standard specification 30 V, VI (S5) VII & 13 |
| 11 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers56 & 57 |
| 12 | PlasteringinC.M. 1 : 5(onecement fivesand)to12 mmthickincludingallcostandconveyanceofallmaterials tositeincludingcostofcementwhichwillbepurcharedlocallybythecontractor and conveyanceofthesametotheactualworksiteandcostformworkincludingwatering curingandallleadsofgoodpotablewaterandallother. 56 & 57 |
| 13 | Plastering 1:4 mix (onecement and five sand) 20mm thick including cost of labour charges etc., completeas directed by departmental officers etc, complete complying with standard specifications.. |
| 14 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete |
| 15 | White washing two coats including cost and conveyance of all materials and labours to work site etc complete., |
| 16 | Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. |
| 17 | Towards supply of Rolling shutter of size 1.80m x 2.10mx2=7.56M2 including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete |
| 18 | Towards supply of Steel windows of sizeincluding two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. |
| 19 | Towards supply of Steel windows of sizeincluding two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. |
| 20 | Towards supply of Ventilators of size 0.45 m x0.60 m including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. |
| 21 | Painting two coats with enamel paint including cost and conveyanceof Labour charges including etc specification |
| 22 | Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete . |
| 23 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement |
| 24 | Dadooing walls withGlazed tiles of sizes 150mm X150mm X 6mm size of approved make and quality and colour lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 25 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with sand cushion and forming the closet using 40mm broken brick jelly in lime concrete flooring alround 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 26 | Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable color for open PVC light point and fan point (for electronic regulator) |
| 27 | Supply and fixing 18W CFL Street Light fittng and all labor charges tc complete |
| 28 | Supply and fixing of 20W 4 Feet LED Fitting with LEDand all labor charges tc complete |
| 29 | Supply and runoff 2*1.5 mm2 PVCinsulated SC unsheathed Cu.conductor of 1100 V garde in 25 mm dia GI pipe (class B) suitably bent at both end with necessary angle iron upright and end support for mains |
| 30 | Supply and runoff 2 of 6 mm2 (84/0.3) pvc insulated SC unsheathed Cu.conductor of 1100 v on 7/20 Gi bearer wire for service connection main |
| 31 | Supplying and fixing of 16AMS DPI Switch of 500volt with fuse and Neutral (side handle) on suitable Tw box /PWD Earthing Service main |
| 32 | Supplying and fixing of 1200mm(48\")AC Ceiling fan with stepped electronic 300W regulator with 1m down rod on the existing clamp |
| 33 | Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc unsheated Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with 150x100x113Tw switch box for 5A3 pin non iter locking with painting of suitable colour with continuous earth connection 14SWG TC wire for open PVC PLUG POINT |
| 34 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit |
| 35 | Supply and fixing of 1.0 HP Single Phase Submersible pumpset as per iS 8034 With out Panel Board Duty condition 15 LPM X 90Mtsetc. complete |
| 36 | Supply and Fixing of Single phase panel Board with two level Guard and Auto Start 1.0 HP etc., complete as per standard specification. |
| 37 | Supply and delivery of 32mm G.I pipe ‘B’ Class with ISI mark etc. complete as per standard specification. |
| 38 | Supply and fixing of HDPE Tank 1000 litres capacity with I.S.I mark etc. complete as per standard specification. |
| 39 | Supply and delivery of 2.5 sq.mm flat copper cablewith ISI mark etc. complete as per standard specification. |
| 40 | Labour charges for the erection of Submersible pump set in bore well/Open Well including fixing and jointing and cable with proper clamps up to the Starter to the required depth and also fixing of riser pipes to the require depth valves erection clamps etc. complete and testing pump sets and trial run for 10 days |
| 41 | Labour charges for the erection of Submersible pump set in bore well/Open Well including fixing and jointing and cable with proper clamps up to the Starter to the required depth and also fixing of riser pipes to the require depth valves erection clamps etc. complete and testing pump sets and trial run for 10 days |
AI Tender Summary
Tender Timeline
Jul 04, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 06, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender