Housing Urban and Rular Development Government Departments Closing in 0 days TDR #38464608

Tender For Up-Gradation Of Maniram Dewan Trade Centre, Betkuchi, Guwahati-35 (Renovation Of 100 Seater Convention Hall And Renovation Of 400 Seater Auditorium), Group No.1

Issued by Government Departments · guwahati, Assam
Tender Value
1.07 Crore
Estimated cost
Bid Submission
17 Jul 2023
0 days left
EMD
2.14 Lakhs
Bank guarantee accepted
Document Fee
2200
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
guwahati → Assam
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Up-Gradation Of Maniram Dewan Trade Centre, Betkuchi, Guwahati-35 ( Renovation Of 100 Seater Convention Hall And Renovation Of 400 Seater Auditorium ) , Group No.1

BOQ

Name of Work : Up-gradation of Maniram Dewan Trade Centre, Betkuchi, Guwahati-35 (Renovation of 100 seater Convention Hall and Renovation of 400 seater Auditorium), Group No.1
Sl. No. Item Description
1CIVIL WORKS: RENOVATION 100 SEATER CONVENTION HALL: Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :15.39.2 Thickness above 10 mm up to 25 mm
2Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
3Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete.11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
4Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :15.14.1 Of sectional area 40 square centimetres and above
5Brick work with common burnt clay bricks of class designation 7.5 in mud mortar
6Smooth finishing of the exposed surface with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).
7Conference hall: Supplying, Installation, Testing and Commissioning of audio visual/ conference system. (Rate applicable on carpet area of hall only)
8Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition withthe help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :.12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
9Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottomportion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.26.27.1 With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6
10Supplying and fixing of Green Panel 8mm thick laminated Wooden Flooring, laying over foam sheet finished with necessary skirting and beading which includes all necessary hardwares, adhesives, screws, along with wood preservatives.
11Providing and Supplying Executive Chair of Featherlite brand, Model:Liberate HB ML AA5 ARMS with high back and high rest with mesh back, along with Cushioned Seat, with multilock mechanism and height adjustable arms of Nylone Base material with Mesh Back
12Providing and Supplying Conference Room\"s Chair of Featherlite brand, Model: Alpha MB with Fabric Upholstered Cushion seat, with a centre tilt mechanism along with Fixed Arms, of Nylon Base material of Grade AN70 MESH
13Providing and Making of Designer partition wall for Convention Hall Backdrop with the use of 50x50x1.8 mm thk. Aluminium frames along with insertion of 50 mm glass wool within horizontal and vertical members 600 mm c/c. The entire framed structure will be cladded with 8 mm thk. MDF board as per the drawing and will have provision for Texture paint/ wall paper finish. The Convention Hall backdrop will further have a Laquered glass with printed designes (1.2 x1.95 m.)inserted within a framed panel . The slits created in the partition will further have 3 nos Laquered glass ( 1.5 x 0.2 m) inserted along the line as shown in the drawing. Rate will include all provision of cut-outs in the partition wall including moulding and pelmets as shown in the drawing
14Providing, fabricating and fixing(450 mm. deep) low height 750mm with 4mm thk.Veneer finish (on external face)storage cabinet including feature cabinet as per drawing consisting of 19mm block board- IS303/MR Grade (Gattani,Archidply, Century),at top, bottom, sides, horizontal & vertical partition, drawers and shuttersand 6mm thick ply backing and with 0.7 mm thk.laminate finish on all inside faces .Rate to include cost towards PU Polish, fixing of stainless steel hinges, tower bolts,locks etc. complete in all respects .
15Providing, fabricating and fixing Table on platform of 750mm height with 4mm thk. Veneer finish (on external face) and 1mm thk laminate fnish (on internal surfaces) as per drawing consisting of 19mm plyboard-IS303 MR Grade (Gattani, Archidply, Century, etc) with 0.7mm thk laminate finish on all inside faces. Rates to include cost towards PU Polish, fixing of tower bolts, etc complete in all respects.
16Providing and making of panelling with the use of 19 mm thick Ply (Gattani or eqivalent make) fixed on wall surface with required joints and screws. The ply surface shall be finally covered with 1mm thick seude laminate ( Green, Merino, century or equivalent) finish as per drawing and design.
17CIVIL WORKS: RENOVATION OF 400 SEATER AUDITORIUM: Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
18Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
19STAGE: Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : 15.14.1 Of sectional area 40 square centimetres and above
20Brick work with common burnt clay bricks of class designation 7.5 in mud mortar
21Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
22Smooth finishing of the exposed surface with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).
23Supplying and fixing of Green Panel 8mm thick laminated Wooden Flooring, laying over foam sheet finished with necessary skirting and beading which includes all necessary hardwares, adhesives, screws, along with wood preservatives.
24AC PLANT FALSE CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of drywall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
25STAGE AREA OF AUDITORIUM WITH REPAIRS TO OTHER DAMAGES: Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand)
26Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :15.12.2 Of area beyond 3 sq. metres
27Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :15.13.2 Of area beyond 3 sq. metres
28Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).9.1.3 Kiln seasoned and chemically treated hollock wood
29Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately).9.5.2 Kiln seasoned and chemically treated hollock wood. 9.5.2.1 35 mm thick shutters
30DRAINAGE SYSTEM: Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.2.8.1 All kinds of soil.
31Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.2.9.3 Hard rock (blasting prohibited)
32Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
33Providing cement mortar for surface finish.Cement mortar 1:4 (1 cement : 4 fine sand).
34CONSTRUCTION OF LOBBY SHED - DISMANTLING OF EXISTING FLOOR TILES AND REPLACEMENT WITH GRANITE FLOORING: Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.15.23.1 For thickness of tiles 10 mm to 25 mm
35Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete.11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
36CONSTRUCTION RCC SLAB FOR USAGE OF AQUAGUARD: Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
37Centering and shuttering including strutting, propping etc. and removal of form for:5.9.4 Shelves (Cast in situ)
38Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.5.22A.1 Mild steel and Medium Tensile steel bars
39Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).
40Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.8.2.2 Granite stone slab colour black, Cherry/Ruby red.8.2.2.2 Area of slab over 0.50 sqm
41Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
42SERVICE LOBBY SHED: Steel work in built up tubular (square hollow tubes of 30x30mm with 1.5mm thickness) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.10.16.2 Hot finished seamless type tubes
43Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.12.1.3 0.63 mm thick with zinc coating not less than 275 gm/m²
44REPAIRING OF WATER LEAKAGE FROM ROOFTOP: Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. 14.89.1 2mm (for corrugated roof sheets).
45OTHER RENOVATION WORKS - RENOVATION AND REPLACEMENT OF DAMAGED ROOFING SHEETS OF AC PLANT SHED AREA: Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:15.28.1 G.S. Sheet
46Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m²
47WATER PIPE LINES CONNECTING MAIN WATER TANK WITH AUDITORIUM TOILETS: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.EXTERNAL WORKS: 18.9.4 32 mm nominal dia Pipes
48RENOVATION OF EXISTING ORGANIZER ROOM - REPLACEMENT OF WATER CLOSET: Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
49Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :17.2.1 W.C. pan with ISI marked white solid plastic seat and lid
50Vitreous china pedestal type water closet
51REPLACEMENT OF TILES: Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.15.23.1 For thickness of tiles 10 mm to 25 mm
52Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
53REPLACEMENT OF WASH BASIN: Vitreous china pedestal for wash basin
54REPLACEMENT OF DOOR (2.1mX0.8m = 1.68sq.m): Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :15.12.1 Of area 3 sq. metres and below
55Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :15.13.1 Of area 3 sq. meters and below
56Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately).9.5.1 Second class teak wood.9.5.1.2 30 mm thick shutters
57REPLACEMENT OF VIP TOILET DOOR IN VIP ROOM (2.1mX0.8m = 1.68sq.m): Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :15.12.1 Of area 3 sq. metres and below
58Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :15.13.1 Of area 3 sq. meters and below
59Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately).9.5.1 Second class teak wood.9.5.1.1 35 mm thick shutters
60ELECTRICAL WORKS: 400 SEATER AUDITORIUM (FALSE CEILING): Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
61Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
62Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
632 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
642 X 4 sq. mm + 1 X 4 sq. mm earth wire
652 X 6 sq. mm + 1 X 6 sq. mm earth wire
664 X 10 sq. mm + 2 X 10 sq. mm earth wire
674 X 16 sq. mm + 2 X 16 sq. mm earth wire
68Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
6925 mm
70Supplying and fixing metal box of following sizes (normal) on surface or recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 100 mm x 100 mm x 60 mm deep
71180 mm x 100 mm x 60 mm deep
72Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch
733 pin 5/6 A socket outlet
74Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
75Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) 3 Module (100mmX75mm)
76Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
77Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
78MCCB, MCB & DB\"S: Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door
79Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 4 way (4 + 12), Double door
808 way (4 + 24), Double door
81Supplying and fixing of following ways surface! recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door
82Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. - Single pole
83Double pole
84Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
85Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A \"C\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
86Supplying and fixing DP sheet steel enclosure on surface! recess along with 25/32 A 240 V \"C“ curve DP MCB complete with connections, testing and commissioning etc. as required.
87Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V \"C\" curve TP MCB complete with connections, testing and commissioning etc. as required.
88Supplying and Fixing Singe Pole Blanking Plate in the existing MCB DB complete etc. as required.
89Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
90Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
91Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Metre long etc. with charcoal/ coke and salt as required.
92Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
93Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
94Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
95Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
96Providing and fixing 4mm dia.copper wire on surface or in recess for loop earthing as required.
97Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
98MV CABLE LAYING: Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. 95 sq. mm and Upto 185 sq. mm
99MV CABLE JOINTING & END TERMINATION: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 120 sq. mm (45mm)
100Supplyof following size of PVC/XLPE insulated and PVC sheathed 11 KV grade aluminium conductor LT armoured UG cable laid in ground/partially in air (10% of cable length) including excavation of cable trench upto depth of 75cm. Refilling, protective brick covering, sand cushioning etc. complete handling of surplus soil, debries etc. to proper place as speciefied and directed by the deptt. 120.00 mm² 3½ core U.G. Cable
101MCB AND MCCB: Supplying and fixing following rating, 4 pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
10263amps
103Supplying and fixing following rating, 3 pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
10463amps
105Supplying and fixing following rating, Four pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 160 amps 4P 25KA MCCB
106INVERTER/ UPS: Supplying including installation of Inverter (NUMERIC/ Microtech/ V-Guard/ Luminous) with Battery and its case as per direction and specified by the Deptt. 3 KVA On-Line UPS System (Orion or equivalent make as approved by the Deptt.) with PWM-IGBT technology360V AC Input (300V – 470V A 3 Ph input- 1 Ph outputWith Isolation Transformer 3 KW output with 0.8 output PF30 min backup using SMF battery
107LUMINIARIES: Supplying of the following Indoor TRACK LIGHT LEDCONSISTING of 3 NUMBERS of luminaries of nake-JAQUAR model no-LTRLB1RO30XN 30W LED complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department ( PHILIPS/ LT / Wipro make). [TR]
108Supplying, installation, testing and Commission of the following indoor Decorative Recess mountedLEDSPOT LIGHT luminaries of nake-CROMPTON model no-CDR -205-12-57-SL-NWH 12W LED complete with all accessories such as Power supply etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department ( Jaquar/ LT / Wipro make). [SP]
109Supplying of the following indoor Decorative Recess mountedLEDdown lighter luminaries of nake-JAQUAR model no-LARVO1R012XC 12W LED complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department ( Jaquar/ LT / Wipro make). [DL]
110Supply, installation and testing of Tray Light / non-integral flexible LED strip light of make Wipro Model FormzLED LS 06/26 LS06-005-120-WW-50 4.8 W per mtr, 5m spool; IP 20 with LG40-024 LED driver 240 V/12V or equivalent. Rate to include cost of lamps. [COB]
111Supplying and fixing of 400 mm sweep Wall fan of make HAVELLS Cat/Brand SwingWall Fan of colour White, Brown or Bianco complete with down rod or equivalent etc. [WF]
112ELECTRICAL WORKS: 100 SEATER CONVENTION HALL: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
113Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
114Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1152 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1162 X 4 sq. mm + 1 X 4 sq. mm earth wire
1172 X 6 sq. mm + 1 X 6 sq. mm earth wire
118Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required
119Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
120Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
12125 mm
122Supplying and fixing metal box of following sizes (normal) on surface or recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 100 mm x 100 mm x 60 mm deep
123180 mm x 100 mm x 60 mm deep
124Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch
1253 pin 5/6 A socket outlet
126Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
127Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm)
128Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
129Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
130Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
131MCCB, MCB & DB\"S: Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 12 way, Double door
13216 way, Double door
133Supplying and fixing of following ways surface! recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required). 8 way (4 + 24), Double door
134Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
135Double pole
136Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
137Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
138Supplying and fixing DP sheet steel enclosure on surface! recess along with 25/32 A 240 V \"C“ curve DP MCB complete with connections, testing and commissioning etc. as required.
139Supplying and Fixing Singe Pole Blanking Plate in the existing MCB DB complete etc. as required.
140Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
141Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
142Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Metre long etc. with charcoal/ coke and salt as required.
143Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
144Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
145Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
146Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
147Providing and fixing 4mm dia.copper wire on surface or in recess for loop earthing as required.
148Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
149MV CABLE LAYING: Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm
150MV CABLE JOINTING & END TERMINATION: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 25 sq. mm (50mm)
151CABLE: Supplyof following size of PVC/XLPE insulated and PVC sheathed 11 KV grade aluminium conductor LT armoured UG cable laid in ground/partially in air (10% of cable length) including excavation of cable trench upto depth of 75cm. Refilling, protective brick covering, sand cushioning etc. complete handling of surplus soil, debries etc. to proper place as speciefied and directed by the deptt. 25.00 mm² 3½ core U.G. Cable
152MCB AND MCCB: Supplying and fixing following rating, Four pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps 4P 25KA MCCB
153INVERTER/ UPS: Supplying including installation of Inverter (NUMERIC/ Microtech/ V-Guard/ Luminous) with Battery and its case as per direction and specified by the Deptt. 3 KVA On-Line UPS System (Orion or equivalent make as approved by the Deptt.) with PWM-IGBT technology360V AC Input (300V – 470V A 3 Ph input- 1 Ph outputWith Isolation Transformer 3 KW output with 0.8 output PF30 min backup using SMF battery
154DATA CABLING AND FIXURES: Patch Cord Cat 6 UTP Gray 1m - Moulded SCHNEIDER/ LEGRAND or equivalent
155Patch Cord Cat 6 UTP Gray 2m - Moulded SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt..
156Patch Panel Cat 6 UTP Keystone -24 Port- Loaded SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt..
157APW Flexi box Wall mount Rack 12U 600 X 550mmD Networking Wall mount Rack with Front Tinted Glass Door with Lock \"PDU 6*5A - 01 Nos.Fan 90 cfm 230V - 01 Nos. Mounting Hardware (Set of 10) - 1 Set 19\"\" 1U Cable Manager - 1 Nos.\"
158LUMINIARIES: Supplying with fitting and fixing of CAT 6 RJ-45 Computer jack in one module MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.
159Supplying of the following Indoor Decorative Recessed mounted 2\" x 2\" LEDLEDdown lighter luminaries of nake-CROMPTON model no-LCTLRP-30-FO-CDL 30W LED complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department ( Jaquar/ LT / Wipro make). [CLS]
160Supplying of the following indoor Decorative Recess mountedLEDdown lighter luminaries of nake-JAQUAR model no-LARVO1R012XC 12W LED complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department ( Jaquar/ LT / Wipro make). [DL]
161Supply, installation and testing of Tray Light / non-integral flexible LED strip light of make Wipro Model FormzLED LS 06/26 LS06-005-120-WW-50 4.8 W per mtr, 5m spool; IP 20 with LG40-024 LED driver 240 V/12V or equivalent. Rate to include cost of lamps. [COB]
162Computer Point Power wiring: Wiring for Modular type Socket points with Modular type Switch including supply of the switch and socket in PVC conduit of IS specificationof proper size with 3 nos of 2.5 sqmm single core PVC insulated stranded copper wire 1.1 KV grade and with all material supply installation and commissioning complete from MCB Distribution Board. The wiring shall be carried out on surface above false ceiling by chiselling the existing surface and plastering the existing surface and plastering the same with cement etc. after fixing the conduit with all accessories like saddles, screws, bends T joints etc. 2 coat of painting matching to the surface including supply installing, testing and commissioning of modular plate type switch and socket for computer terminal on sheet steel enclosure (cadmium plated), duly fitted with screw to the steel conduit and fixed to the wall partition furniture with all interconnection and proper earthing. All the opening shall be covered with blank plate and be sealed to make the box vermin proof. With 3 nos of2/3 pin combined 6A socket with single 6 A switch. [SOC]
163Supplying and fixing of 400 mm sweep Wall fan of make HAVELLS Cat/Brand SwingWall Fan of colour White, Brown or Bianco complete with down rod or equivalent etc. [WF]
164Supplying installation testing and commissioning of 60 inches 4K 1/3\" Super HAD Colour LED, 600 TV LINES,Compact, light weight with making necessary connection as approved by the Deptt.) as required complete and as directed by the Department. (LGor equivalent SAMSUNG/ PANASONIC/ Philips make)
165Supplying installation testing and commissioning of PROJECTORwith Screen with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. (Epson or equivalent SAMSUNG make) model: EP-541.

AI Tender Summary

OUR REF NO 38464608
AUTHORITY Government Departments
TENDER VALUE 1.07 Crore
LAST DATE 17-07-2023
Authority
Authority Name Assam Industrial Infrastructure Development Copr
Work Description Tender For Up-Gradation Of Maniram Dewan Trade Centre, Betkuchi, Guwahati-35 ( Renovation Of 100 Seater Convention Hall And Renovation Of 400 Seater Auditorium ) , Group No.1
Basic Detail
Tender No AIIDC/3439/2022/32/4767 dated 03/07/2023
Bidding Type Tender
Location
City guwahati
State Assam
Key Dates
Publish Date 04 Jul 2023
Submission Date 17 Jul 2023
Open Date 17 Jul 2023
Finance
Tender Value 1.07 Crore
Tender Fee 2200
EMD 2.14 Lakhs
Exemption Not Available
Document List
a62e52ce-37ac-4626-9c68-69eb54370485.html
Bid_Document_Group_No._1.pdf
BOQ_50360.xls
Form_Of_Bid_Group_No._1.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 04, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 17, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 17, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

a62e52ce-37ac-4626-9c68-69eb54370485.html

_1

Bid_Document_Group_No._1.pdf

xls

BOQ_50360.xls

_1

Form_Of_Bid_Group_No._1.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender