|
| 1 | Earthwork excavation in all classes of soils and depositing on bank with an initial lead and lift such as sand or other loose soil, wet sand not under water silt and ordinary soil, sandy loom, and hard stiff, black cotton soil, red earth, earth mixed with 50% fair sized boulders as per SS20B, including all labour charges etc., complete for foundation. upto 0.30mdepth |
| 2 | Filling with good river sand into foundation and basement including cost and conveyance of all materials to work site and all labourcharges for filling, watering etc., complete. |
| 3 | PCC 1:4:8 mix using 40mm ISSHBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying and watering etc., complete. |
| 4 | Reinforced Cement concrete 1:1.5:3 mix using 20mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc., complete. Upto basement |
| 5 | Reinforced Cement concrete 1:1.5:3 mix using 20mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc., complete. Above basement |
| 6 | Brickwork in CM 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and including all labour charges and all incidential charges etc., complete. Upto basement |
| 7 | Brickwork in CM 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and including all labour charges and all incidential charges etc., complete. ForSuperstruture. |
| 8 | Special ceiling plastering in CM 1:3 –10mm thick including cost and conveyance of all materials and all labour charges etc., complete. |
| 9 | Plastering in CM 1:5 ,12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete. |
| 10 | Painting the newly plastered wall surface with two coats of Exterior Emulsion outside the building over one coat of cement primer including clearing the surface in all floors etc., complete as per standard specification. |
| 11 | Paintingtwo coats over iron steel works with ready mix paint of approved colour and trade including cost and conveyance of all materials and all other labour charges etc., complete. |
| 12 | Flooring with granolithic flooring to 25mm thick using cement concrete 1:2:4 mix using 20mm ISS Size HBG metal, including cost and conveyance of all materials to worksite and all labour for watering, curing and all lead fo good water and all labour and al |
| 13 | Manufacturing supplying and fixing ofMILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase ofDouble shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers |
| 14 | Manufacturing supplying and fixing ofMILD STEEL Window made out of 40 x 40 x 6 mm M.S angle for outer frame, 35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets ( 18 G ) with 5Nos,of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase ofDouble shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers. |
| 15 | Supplying and erriecting, centring for plane surfaces structures such as RCC slab, beam etc., inlcuding strutting upto 3m height using mild steel sheets of size 90cm x 60cm x and B.G 10 stiffened with M.s angles of size 25 mm x 25mm x 3mm for boarding laiColumn |
| 16 | Supplying and erriecting, centring for plane surfaces structures such as RCC slab, beam etc., inlcuding strutting upto 3m height using mild steel sheets of size 90cm x 60cm x and B.G 10 stiffened with M.s angles of size 25 mm x 25mm x 3mm for boarding lai Slab |
| 17 | Supply and fabrication of steel including cost and conveyance of steels to worksite including labour for cutting, jointing and welding if necessary including all labour charges for dying with binding wire etc., complete. |
| 18 | Supplying and fixing rain water PVC rain water down fall pipes of 4kg/cm2 variety of 110mm PVC Pipe including charges for fixing them in position with necessary shoes, bends, clamps, TW plugs, screws, nails etc., complete. |
| 19 | Wiring with 2x1.5 sq mm (22/0/3) PVC insulated Sc. Unsheathed cu. Conductor cable of 1100 V. Grade in Suitable PVC rigid pipe consealed on wall and ceiling with PVC accessories in flush with wall with 3 mm thick hylum sheet cover with T.W. switch box and |
| 20 | Supply and fixing of CF lamp fitting including angle holder. |
| 21 | Supply and fixing of WT Bulk head fitting with guard (Philips/Bajaj/Crompton/K,lite) suitable for incandescent lamp with 60 W bulb. SD No. 84 |
| 22 | Wiring with 2x1.5 sq mm (22/0/3) PVC insulated Sc. Unsheathed cu. Conductor cable of 1100 V. Grade in Suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113 mm T.W. switch box for 5 A 3 pin non interlocking CS plug with pain |
| 23 | Supply and fixing of 16 Amps DP switch with metal clad of 500V with fuse and neutral (side handle) on suitable TW box with PWD earthing. (SD No.141) |
| 24 | Supply and run of 2 of 6 sq. mm (84/0.3) PVC insulated SC unsheathed Cu.Couductor of 1100 V grade on 7/20 GI bearer wire for service connection main (From building to service pipe) (SD No.66) |
| 25 | Supply and run of 2 of 6 sq. mm (84/0.3) PVC insulated SC unshenthed Cu.Couductor of 1100 V grade on 7/20 GI bearer wire for service connection main (From electric Postto service pipe) (SD No.66) |
