Tender For Special Major Repair Work At Gps Chikhli Block- Kotda Dist-Udaipur
Tender Value
2.95 Lakhs
Estimated cost
Bid Submission
12 Jul 2023
0 days left
EMD
5900
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chikhli → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Major Repair Work At Gps Chikhli Block- Kotda Dist-Udaipur
BOQ
| Sl. No. | Item Description |
| 1 | PART A ( CIVIL WORK) BASED ON PWD BSR 2022 |
| 2 | Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 3 | 14.9 Demolishing stone rubble masonry manually/ by mechanicalmeans including stacking of serviceable material and disposal of unserviceable material within direction of Engineer-in-charge:In lime mortar. |
| 4 | 4.10 .2 Centering & shuttering with plywood or steel sheets includingstrutting,proppingbracingbothwayswithsteelpropsand removal of formwork for upto floor five level for :Suspended floors,roofs,landings,staircases,balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. |
| 5 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing,compaction,finishingwithrenderingincement sand mortar 1:3 (1 cement: 3 coarse sand) and makingcement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams,suspended floors,roofs,gridershavingslopesupto15landings, balconies,shelves,chajjas,lintels,bands,plainwindows sills, staircases and spiral staircases etc. M20 grade Nominal Mix /Design Mix |
| 6 | STEEL REINFORCEMENT:ProvidingandfabricatingreinforcementforR.C.C.Work ncluding straightening, cutting, bending, placing in positionand binding (including cost of binding wire) all complete up tofloor five level.Thermo-mechanically Treated bars (Conforming of relevent IScode) |
| 7 | Grading roof for water proofing treatment withwater proofing compound Grading roof for water proofing treatment withwater proofing compound |
| 8 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 stone aggregate 10mm and down gauge)including finishing with cement mortar 1:3 (1 cement : 3 finesand) as per standard design : |
| 9 | Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 10 | 12.3 Plaster on new surface on walls in cement sand mortar 1:6including racking of joint etc. complete fine finish :20 MM THICK |
| 11 | 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) |
| 12 | 9.1 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 13 | 9.17 Providing and fixing M.S. sheet 1mm thick single leaf doorshutter in angle iron frame 35x35x5mm suitabilly diagonallybraced with 25x3mm flat iron above and below lock rail ofsize 50x5mm beading extra including all fittings, as perdirection of Engg. incharge butbraced with 25x3mm flat iron above and below lock rail of excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paintAdd extra for double leaf shutters. |
| 14 | 9.24 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. |
| 15 | 9.24 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 16 | 12.33 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:12.40.1 Two or more coats on OLD work including prepartion of base with primer, putty, lippy etc complete in all respect. |
AI Tender Summary
Tender Timeline
Jul 03, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 12, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender