}

Tender For Construction Of Pump House, Source Work, Cwr, Laying Of Rising Main, Supply Main, Distribution Lines, Providing Household Connections With Other Appurtenant Works Of Banana-Pinsela Pumping W/S Scheme Of Block Bhimtal., Bhimtal-Uttarakhand

Drinking Water And Sanitation Department has published Tender For Construction Of Pump House, Source Work, Cwr, Laying Of Rising Main, Supply Main, Distribution Lines, Providing Household Connections With Other Appurtenant Works Of Banana-Pinsela Pumping W/S Scheme Of Block Bhimtal.. Submission Date for this Tender is 10-07-2023. Pump House Construction Tenders in Bhimtal Uttarakhand. Bidders can get complete Tender details and download the document.




Tender Notice

38429809
Tender For Construction Of Pump House, Source Work, Cwr, Laying Of Rising Main, Supply Main, Distribution Lines, Providing Household Connections With Other Appurtenant Works Of Banana-Pinsela Pumping W/S Scheme Of Block Bhimtal.
Open Tender
Indian
Uttarakhand
Bhimtal
10-07-2023

Tender Details

Construction Of Pump House, Source Work, Cwr, Laying Of Rising Main, Supply Main, Distribution Lines, Providing Household Connections With Other Appurtenant Works Of Banana-Pinsela Pumping W / S Scheme Of Block Bhimtal.

Key Value

Document Fees
INR 8260 /-
EMD
INR 380000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Supplying, carting, laying & jointing of Supply main/Distribution system from Source to service reservoirs and service reservoirs to House Hold"s by branches pipe line worksetc. complete including 12 months maintenance under Banana-Pinsela Pumping Water Supply Scheme of Block Bhimtal in District Nainital.
Sl. No. Item Description
1Civil Works:- Supply of all mateials, labour T&P etc. and construct boulder filled Gallery 5 m wide as per type design complete
2Same as above item 1 (a) but excess over 2 m wide cross wall.
3Supply of all mateials, labour T&P and construction of spring collection chamber as per departmental type design complete
4Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)
5Same as above item no 3(a)but laid in dry
6Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. requiredor proper completion of the work. as per drawings and technical specifications
7Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
8Providing of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete.
980 mm dia 4.8 mm thick
10Excavationfor pipe lineAssuming that 90% pipe line is laid in trenches, it is estimated that 75% excavation will be done in soil mixed with shingle, bajri & boulders and rest 25% will be done in medium rock.
11Soil mixed with Boulder
12Medium Rock
13Supply and fixing of the following fittings including cartage of materials labour T&P and testing of valves etc. complete
1480 mm dia reflux valve
15Providing and fixing double acting air valve
1680 mm dia double orifice air valve
17Supply of all materials, labour, T&P etc. Complete and construct anchor/thrust blocks in RCC 1:2:4 for rising main excluding cost of steel 20 nos.0f 0.75x0.75x0.75 size
18Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars
19Supply of all materials, labour, T&P etc. and construction of 60cm x 60cm x 75cm size Wheel Valve chamber .
20Providing and laying in position specified grade of reinforced cement concrete: 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
21Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. for window, ventilator and similar works. use angle, square bar, etc
22Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand).
23Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).
24Supply of all materials, labour, T&P etc and construction of R.C.C.C.W.R. of following capacities ( in kiloliters ) with MS ladder outside and inside of the tank , M.S. M.H. cover with locking arrangement, ,supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex)/enamal paint, testing,filling water for testing purpose etc. including supply of vertical pipes , specials, and testing of tank, assuming bearing capacity as 8MT/M2
2512.5 KL Sump
2617.5 KL Sump
2725 KL CWR
2850 KL Sump
2960 KL Sump
30Supply and installation of bucket type chlorinator of 25 liters capacity compete.
31Providing of all materials, Carting from site store to site of work,Laying & jointing of GI (M) screwed pipes (including supply of all jointing materials, white lead, hemp and oil etc) in trenches withits cutting, threading and testing of pipe line etc complete.
3215 mm dia (Balance FHTC)
3320 mm dia
3425 mm dia
3532 mm dia
3640 mm dia
3750 mm dia
38Cartage of following sizes of valves,lowering them into trenches and fixing the same on water supply line including the cost of valves, specials lobour T&P complete in all respect but excluding the cost of excavation and chember
3925 mm dia
4032 mm dia
4140 mm dia
4250mm dia
43Air valves (Class-I)as per I S 788/1997.
4415mm dia
4520mm dia
46Supply of all materials, labours, T&P. etc.and construct B.P.T. as per type design complete.
47Dismantling of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50m but excluding the cost of earth work.
4815 mm dia
4920 mm dia
5025 mm dia
5132 mm dia
5240 mm dia
53Carting, laying & jointing fixing and testing of dismantled pipes includinglowering them into trenches , laying true to alignment & gradient , laying & jointing of pipe line including cutting & threading of pipe for making up lengths as required for proper completion of work
5415 mm dia
5520 mm dia
5625 mm dia
5732 mm dia
5840 mm dia
59Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer in charge - for bituminous road
60Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer in charge. - for Nominal concrete 1:3:6 or richer mix.
61Making connection with the existing M.S. Galvanised mains of upto 25mm nominal dia, including cutting and threading of pipe, bailing out water, fixing, if required, specials and testing etc. complete, but excluding cost of insertion pipes and specials besides boring out (and also subsequent back fill) existing main.
6215 mm to 25 mm
6332 mm to 40 mm
64Inserting and fixing water meters or fittings such as stop cocks, wheel valves etc. in the existing G.I. pipe lines including cutting and threading pipe and making long threads etc. complete,
65Upto 25 mm size
6632 mm to 40 mm
67Providing & Fixing Bulk Water Meter inline type, flange end with integral mounted desplay and all necessaary fittings etc. complete.
6850 mm dia
69Providing and fixing with all materials T&P labour Functional House Hold Tap Connection etc complete. [For Base Year Balance HH]
70Construction of pump house (4.0x3.50m) with chloronome as per departmental type design including supply of all materials, labour, T&P etc complete in all respect.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail