|
| 1 | Taking up or down CI/DI/MS water mains of the following bore dia including all fittings with spigot and socket ends and lead jointsincludingburning out joints and recoverning lead complete all as specified and directed by Engr-in-charge. Note : Excavation & earth work shall be measured and paid for separately in the item of works. |
| 2 | 80 mm bore size |
| 3 | 100 mm bore size |
| 4 | 150 mm bore |
| 5 | 200 mm bore size |
| 6 | 250 mm bore size |
| 7 | 300 mm bore size |
| 8 | 450 mm bore size |
| 9 | Refixing only CI/DI/MS/GI tubing of the following bore sizesincluding fitting such as bends, tees, elbows,short pieces, connectors, back nuts and connections in new or old position (walls, ceiling, floors, aboveor below the ground )include for cleaning or rerunning the old screwthreads as required complete all as specified and as directed by Engineer-In-Charge.Note (1) : Excavation & earth work shall be measured and paid for separately in the item of works. (2) Necessary additional lead joints will be measured and paid seperately |
| 10 | 80 mm bore size |
| 11 | 100 mm bore size |
| 12 | 150 mm bore |
| 13 | 200 mm bore size |
| 14 | 250 mm bore size |
| 15 | 300 mm bore size |
| 16 | 450 mm bore size |
| 17 | Supply and laying Centrrifugally cast(Spun) ductile iron pressure pipes with spigot & socket end class K-9 conforming to IS:8329/2000 and amendment No 1, 2 & 3 suittable for (push-on) rubber gasketjointing with centrifugally applied inside cement mortar lining with portland slag cement as per IS 455:1989 and external metallic zinc coating as per annex A of IS 8329with finishing layer of Bitumen coating as per Annex C of IS 8329. The standard lenngths of the pipe are 5.50 meter complete all as specified and directed. Note: (i) Excavation & Earth work will be measured and paid seperately. Makes:-Tata/Electrosteel/Jindal /Saw ltd/Jai balaji Industries. |
| 18 | 80 mm bore dia pipe |
| 19 | 100 mm bore dia pipe |
| 20 | 150 mm bore dia pipe |
| 21 | 200 mm bore dia pipe |
| 22 | 250 mm bore dia pipe |
| 23 | 300 mm bore dia pipe |
| 24 | Supply and layingfor MS ERW Pipe medium grade Class \"B\" for the following bore size complete all as specifed and directed by Engr-in-charge. Note : Excavation & earth work shall be measured and paid separately.Makes:-Tata/Surya/Jindal/Swastik/prakash/Zenith/BST |
| 25 | 80 mm bore dia pipe |
| 26 | 100 mm bore dia pipe |
| 27 | 150 mm bore dia pipe |
| 28 | Supply and layingfor MS ERW Pipe Heavy grade Class \"C\" for the following bore size complete all as specifed and directed. Note : Excavation & earth work shall be measured and paid separately.Tata/Surya/Jindal/ Swastik/prakash/ Zenith/BST |
| 29 | 200 mm bore dia pipe |
| 30 | 250 mm bore dia pipe |
| 31 | 300 mm bore dia pipe |
| 32 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, taking down/ laying of cables/ pipes or for shafts, wells, cesspits, manholes, pier holes, etc. and not exceeding 10 Sqm on plan and getting out in hard / dense soil complete all as specified and as directed. |
| 33 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed. |
| 34 | Removing excavated material (spoil) at a distance not exceeding 50m and depositing where directed at a level n. exc. 1.50 m above the starting point complete all as specified and directed. |
| 35 | Labour only for site clearance/surface cleaning by removing of hurbs/shurbs/wild vegetation/removing surpus soil to a distance n exc 50 mtr and making good surface of the E/M installations area with suitable T&P complete all as specified and directed by the Engr-in-charge. Note:- All T&P will be provided by the contractor without any extra cost and also not to cut any tree/plants during the execution of works. |
| 36 | Taking down old UNSV sluice valve/butterfly valve /foot valve/NRV/air release valve of various sizes 450/300/250/200/150/80 mm complete all as specified and directed. |
| 37 | S&F in replacement of UNSV cast iron butterfly valve both ends flagned of the differeent bore dia , flange type with bypass arrangement suitable water mains conforming to IS-13095(1991)I class PN 1.6 lever operated incuding necessary jointing materials complete all as specified and directed. Make: Kirlosakr/L&T/Upadhayay/ Leader/Normax/AUDCO |
| 38 | 250 mm bore dia pipe |
| 39 | 200 mm bore dia pipe |
| 40 | 150 mm bore dia pipe |
| 41 | 100 mm bore dia pipe |
| 42 | 80 mm bore dia pipe |
| 43 | Supply & FixMS specials such as bends (any type, radius and angle) tapers any type, straight, bend, increasing, decreasing or double socket etc.) tee pieces single branch, \"Y\" junction, double branch, cross (all sockets or sockets and spigot) collars, caps and plugs upto 300 mm bore. |
| 44 | Supply & FixMS specials such as bends (any type, radius and angle) tapers any type, straight, bend, increasing, decreasing or double socket etc.) tee pieces single branch, \"Y\" junction, double branch, cross (all sockets or sockets and spigot) collars, caps and plugsUpto 450 mm bore. |
| 45 | M&L for removing of wild grass/vegetation/solid/earth particles/tree logs or other foreign particles which disturbed the suction of raw water from theof course of river (Mahanadi River) into the intake channelof the suction side of the raw water pumps installed at Birupa Pump House so that the intake channel get sufficient raw water for pumping to the sedimentation bed by using sufficient & skilled labour from the suction pipe foot valve laying at the depth of aboutapprox 10 feet under the water complete all as specified and directed. Note: (i) T&P required for removal/excavation/clearing shall be provided by the contractor and rate for the same be included in the quoted rates. (ii) SkilledManpower required for making area at footvalve clear for intake shall be provided by the contractor and contractor shall provide all safety equipments for manpower for doing the necessary jobs in river/bank area and contractor will be responsible for the safe execution of the said job. (iii) The contractor should detailed the manpower within 1 hr after intimation by department through any medium. (iv) If the contractor failed to detailed the manpower than Rs 1000 per day will be charged as penalty in case of non-compliance or non-rectification of job and being essential nature of work necessary action will be initiated. |
| 46 | M& L formechenical joint ( CTD) circular clamp suitable for different dia ofGI/CI pipe complete with long coller , two Nos circular rubber ring and casted ringsincluding bolts 04 Nos of suitable lengthwithnuts washers etc complete all as specified and directed. |
| 47 | Suitable for 80 mm dia |
| 48 | Suitable for 100 mm dia |
| 49 | Suitable for 150 mm dia |
| 50 | Suitable for 200 mm dia |
| 51 | M& L for circular clamp suitable for Diffrent dia GI/CI pipe in two piecesduly fabricated by 4 mmthick MS sheet, welded angle piece( 04 No’s) at edges,width of clamp 200 mm and with packing sheet of 5 mm thick including bolts (04 Nos) 100 mm long and 12 mm dia withnuts washers etc complete including excavation and earth work for exposing the joints and working space on the site, returning filling in and making good to the existing earth level of the surroundings afterrepair complete all as specified and directed. |
| 52 | Suitable for 80 mm dia |
| 53 | Suitable for 100 mm dia |
| 54 | Suitable for 150 mm dia |
| 55 | Suitable for 200 mm dia |
| 56 | Labour only for attending break down of pipeline bursting / cracks and including cleaning / removal of broken pipe pieces of various lengths through gas cutting / manual cutting as per site requirement and including by using suffient dewatering pumps , JCB\"s ,Cranes as per site requirement all as specified and directed by the Engineer -in - Charge. |
| 57 | 80 mm bore CI/DI/MS pipe |
| 58 | 100 mm bore CI/DI/MS pipe |
| 59 | 150 mm bore CI/DI/MS pipe |
| 60 | 200 mm bore CI/DI/MS pipe |
| 61 | 250 mm bore CI/DI/MS pipe |
| 62 | 300 mm bore CI/DI/MS pipe |
| 63 | 450 mm bore CI/DI/MS pipe |
| 64 | Note 1 :- The quoted rate is deemed to be include the following:-(i)Arrangement of suitable Pump sets for dewatering at the time of attending break down, (ii) Necessary labour / trade men for attending break down,(iii) does not includeLabour element required for fixing CI/DI/MS pipes, specials, fittings etc.Note 2 :-M&L forEarth work,Lead joints, supply only CI / DI / MS pipes, specials, fittings will be measured and paid seperately under relevant items of BOQ.,Note 3 :- Being essential service in nature contractor should attend breakdown within 2 hrs of intimation & the job to be completed within 24 hrs or earlier as directed, for delay in attending breakdown penalty will be imposed of Rs 3000 per day & necessary action should be initiated accordingly. |
| 65 | S&F in replacement of Sluice valve of the different dia, cast iron body,class PN-1.6, with flanged ends drilled at both ends, conforming to IS-14846, ISI marked, having brass spindle with iron wheel at top, with nuts, bolts , washers, rubber gasket etc, complete all as specified. Make: Kirloskar / L&T / Upadhyay / Leader |
| 66 | 300 mm bore dia pipe |
| 67 | 250 mm bore dia pipe |
| 68 | 200 mm bore dia pipe |
| 69 | 150 mm bore dia pipe |
| 70 | 100 mm bore dia pipe |
| 71 | 80 mm bore dia pipe |
| 72 | M&L for run lead joint in repairsfor CI spigot and socket pipes and fittings for jointing flanged pipes and fittings include for provision of bolts,nuts,washwers and white lead or mineral oil etc complete all as specified and as directed. |
| 73 | 450 mm bore dia pipe |
| 74 | 300 mm bore dia pipe |
| 75 | 250 mm bore dia pipe |
| 76 | 200 mm bore dia pipe |
| 77 | 150 mm bore dia pipe |
| 78 | 100 mm bore dia pipe |
| 79 | 80 mm bore dia pipe |
| 80 | Burning out existing lead jointfor CI pipe of the following bore size complete all as specified and as directed. |
| 81 | 450 mm bore dia pipe |
| 82 | 300 mm bore dia pipe |
| 83 | 250 mm bore dia pipe |
| 84 | 200 mm bore dia pipe |
| 85 | 150 mm bore dia pipe |
| 86 | 100 mm bore dia pipe |
| 87 | 80 mm bore dia pipe |
| 88 | S&F in replacementCI double ball air release valve suitable for water main suitable bore sizeboth end flanged confirming IS 14845(2000), PN 1.6 complete all as specified and as directed.Make : Leader/BIR/Kirloskar/ Upadhyay/Sant/ AUDCO/ L&T/ Venus/Normax |
| 89 | 150 mm bore dia pipe |
| 90 | 80 mm bore dia pipe |
| 91 | 50 mm bore dia pipe |
| 92 | Suppy & fix gland packing rope(asbastor rope) for packing of pumpsets , sluice valves etchaving graphited PTFE packing reinforced with high tensile yarn , interlock braided dense packing having high degree of resiliencyand chemical properties to safegaurd shaft/sleeves from wear/erosion & graphite enables smoother running of shaft with uniform heat dissipation complete all as specified and directed by Engr-in-charge. |
| 93 | M&L for Mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways,ailings, framework of water tanks and similar work complete including necessary welding,fastening as required conforming to Fe.290.Gde-E-165, complete, all as specified and directed. |
| 94 | M&L for disconnecting existing following capacity tanks, seting aside ( or lowering if required) for repair,cleaning , etc and hoisting if required reconnecting and re-refixing in position. Hoisting and fixing tanks includes for removal from store, hoisting into position either inside or outside building, connecting up pipes, scruing access etc complete all as specified and directed.Note :- Cleaning ,repairing, etcmeasured and paid separately. |
| 95 | Exc 500 Ltrs& not exc 1000 Ltrs |
| 96 | Exc 1000 Ltrs& not exc 2000 Ltrs |
| 97 | M&L for cleaning and removing all scale and dirt, etc from the following capacity tanks and from mouths of circulating pipes etc complete all as specified and directed. |
| 98 | Exc 500 Ltrs& not exc 1000 Ltrs |
| 99 | Exc 1000 Ltrs& not exc 2000 Ltrs |
| 100 | Supply & Fix DIspecials such as bends (any type, radius and angle) tapers any type, straight, bend, increasing, decreasing or double socket etc.) tee pieces single branch, \"Y\" junction, double branch, cross (all sockets or sockets and spigot) collars, caps and plugs upto 450 mm bore. |
