Military Engineer Services-MES has published Tender For Repair To Leakage Sepage Water Roofing Treatment Of Roof False Ceiling Wall Paneling And Connected B/R Work At Parade Ground Under Ge Bharatpur. Submission Date for this Tender is 12-08-2023. Shed Construction Tenders in bharatpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Jul-2023 | date postponed | Date | 05-08-2023 |
| 2 | 27-Jul-2023 | BOQ revised | BOQ | 05-08-2023 |
| 3 | 05-Aug-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-08-2023 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster or cement lime plaster on PCC/stonesurface/brick surfaces including raking out joints hacking for keyscrubbing down with water etc complete all as specified & directed Engr in Charge. |
| 2 | M&L for15 mm thick rendering surface other than fair face of brick-work or stone masonary surface with cement mortar 1:4 finished even & fair complete all as specified & directed Engr in Charge. |
| 3 | Ditto as above item no 2 but on fair faces of brick work or concrete surface with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified & as directed |
| 4 | M&L for Rendering 10 mm thick in cement and sand mortar 1:3 onfair faces of cement concrete surfaces of ceiling ofchajjas/roof protection etc including finishing the surface even and smooth without using extra cement complete all as specified & directed Engr in Charge. |
| 5 | Demolition of brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles Complete all asspd and directed by Engr-in-Charge. |
| 6 | M&L Brick work with sub class "B" old size bricks bricks straight or cured on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified & directed Engr in Charge. |
| 7 | Ditto Item No 6 above but except bricks |
| 8 | M & L Preparation of newplastered or un plastered surface of wall including cornices, pilasters etc by brooming down andapplying two coats of distemper oil emulsion white or tinted over a coat of wall primer akali resistant priming paint with hand roller complete all as specified & directed Engr in Charge. |
| 9 | M&L Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over a coat of Primingwith alkali resistant priming paintwith hand roller complete all as specified and asdirected by Engr-in-Charge. |
| 10 | M&L Preparation of newly plastered surfaces of ceiling & applying three coatsof white washcomplete all as specified & directed Engr in Charge. |
| 11 | Demolition of cement concrete unreinforced in ground floor and paving n.exc 15 CM thickness (below or above GL)complete all as specified & directed Engr in Charge. |
| 12 | M&L for plain cement concrete 1:4:8 type D2 (40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified & directed Engr in Charge. |
| 13 | M & L forEndura Designer Collection Series oftile of size 300x300x10 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 15mm thick base of cement mortar 1:4in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete all as specified & directed by Engr in Charge. |
| 14 | M&L dismantling floor,hearth or wall tiling including cement mortarbedding(but not backing) , removing serviceable tiles to store and rubbish off the premisescomplete all as specified & directed by Engr in Charge. |
| 15 | M&L Glazed ceramicTiles,in verticle surface 350X250X7mm/ 450X300X7mm set & jointed in neat cement slurry and pointed in white or colour cement to match the existing surface over and including 15mm thick rendering in CM 1:4complete all as specified & directed by Engr in Charge. |
| 16 | M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in coloured cement over & including 15mm thick rendering in CM 1:4complete all as specified & directed by Engr in Charge. |
| 17 | M&L for Vitrifiedceramic tiles 10 mm thick (Square/rectangular) area of each tilenot exceeding 0.36 sqm ,over & including 15 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to matchcomplete all as specified & directed by Engr in Charge. |
| 18 | Dismantling of stone slab and tiles of any description or thickness in floors, etc laid beded and pointed in any mortarcomplete all as specified & directed by Engr in Charge. |
| 19 | M&L for Granite (of any type) tiles/slab inskirting/dados 20 mm thick over baking coat 15 mm thick in cement mortar 1:3, laid and jointed with grey cement slurry and pointed withwhite cement with admixture of pigment to matchthe shade of granite stone including rubbing and polishingcomplete all as specified & directed by Engr in Charge. |
| 20 | M & L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified & directed by Engr in Charge. |
| 21 | M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified & directed by Engr in Charge. |
| 22 | M&L for Machine cut kota stone slab20-25 mm thickin riser of steps, skirting, dedo and pillar laid over cement screed 15 mm thick in cement mortar 1:4, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 23 | Cutting, polishing to existingKota/ marble flooring,(three cuttingsand mirror polishing) including levelling certain places toKota/ marble floor ,necessary repair workcomplete all as specified & directed by Engr in Charge. |
| 24 | Cutting,Scrubbing,Rubbing, polishing toxistingTerrazo (Mosaic or Marble)flooring ) ,including removing mild water stains,organic spill stains ,scratches ,other marks & levelling certain places to Terrazo (Mosaic or Marble) floor ,necessary repair work complete as directed By Engineer-in-Charge . |
| 25 | Demolition and breaking up drain pipes (SGSW, AC or reinforced cement) set in cement mortor internal dia of pipe 100mm/75mmcomplete all as specified & directed by Engr in Charge. |
| 26 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wallscomplete all as specified & directed by Engr in Charge. |
| 27 | S&F in repair of 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors,ISI markedcomplete all as specified & directed by Engr in Charge. |
| 28 | S&F in repair vitreous china wash hand basin, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets, cutting for and pinning in ends of brackets or erecting stand completecomplete all as spcfd & as directed . |
| 29 | S&F in repair bib tap, cast copper alloy, with crutch or butterfly handle, screweddown, screwed for iron pipe or for brass ferrule of 15 mm bore,complete all as specified & directed by Engr in Charge. |
| 30 | S&F in repair of pillar tap, cast copper alloy with capstan heads,chromium plated, fancy type screwed down high pressure, with or without lettered"Hot" or "Cold"with long screwed shanks & fly nuts, screwed for iron pipes of 15mm borecomplete all as specified & directed by Engr in Charge. |
| 31 | S&F in repairchromium plated15mm bore dia stop valve/Angle valve cast copperalloys, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified & directed by Engr in Charge. |
| 32 | S&F in repair of PVC low level flushing cistern 10 ltrs capacity with inletball valve float & handle, syphonic action type including brackets & flush pipe of polythelene of low or high level32mm diacomplete all as specified & directed by Engr in Charge. |
| 33 | S&F of three layred 500 ltrISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in positionincluding20mm brass ball valve Including dismantling of existing ater tank of 1000 Ltr capacitylcomplete all as specified & directed by Engr in Charge. |
| 34 | S&F of 1000 ltrISI marked three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including20mm brass ball valve Including dismantling of existing water tank of 500 Ltr capacitycomplete all as specified & directed by Engr in Charge. |
| 35 | Dismantling and taking up or down the existing unserviceable GI pipe andM&L for new galvanised steel water tubing medium grade with all fittingsand fixed complete to walls and ceilings or laid in floors of following sizes :- |
| 36 | 15 mm bore |
| 37 | 20 mm bore |
| 38 | S&F in repairs.brass ball valve of 20mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixedcomplete all as specified & directed by Engr in Charge. |
| 39 | S&F in repairs brass ball valve of 25mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrulecomplete all as specified & directed by Engr in Charge. |
| 40 | S & F in repair of vitreous china squatting pan, "Orissa" pattern, size 580x440 mmwhite, with integral foot rests, "P" or "S" trap, including connection to trap,and to flushing pipe, anti-syphonage pipe etc. complete includingmaking good to floor with PCC, Lime concrete beddingcomplete all as specified & directed by Engr in Charge. |
| 41 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified & directed by Engr in Charge. |
| 42 | S&F Rolled sections as in as in post ,roof trusses (framed), trussed, purlins, crane gantries, rails , fastenings , heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleatsetc. conforming to Fe-410W Gde E-250 quality "A"including cutting,welding etccomplete all as specified & directed by Engr in Charge. |
| 43 | Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soilcomplete all as specified & directed by Engr in Charge. |
| 44 | M&L of PCC 1:3:6 type C-2 ( 40 mm graded aggregates ) as in foundations filling and mass concretecomplete all as specified & directed by Engr in Charge. |
| 45 | Dismantling corrugated or semi corrugated Asbestos cementsheets in roof coveringscomplete all as specified & directed by Engr in Charge. |
| 46 | M & L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screwscomplete all as specified & directed by Engr in Charge. |
| 47 | M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified & directed by Engr in Charge. |
| 48 | M&L forone coatspainting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwisedescribed over 10 CM width or girth including preparation ofsurface including all preparatory workcomplete all as specified & directed by Engr in Charge. |
| 49 | Demolition of PCC in roof covering, kerbs,roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as specified & asdirected (also including the rate for disposal of building rubbish/ malba of dismantled or waste material collected after demolition of existing treatment & dumping for lead upto 1km for all lifts)complete all as specified & directed by Engr in Charge. |
| 50 | M&L for 40mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) in roof covering , benching , etc& finished even and roughcomplete all as specified & directed by Engr in Charge. |
| 51 | M&L for screed bed or bedding layer of 15 mmthick cement mortar 1:4,for floor finished even & smooth without using extra cement complete all as specified & directed(mixed with WPC)complete all as specified & directed by Engr in Charge. Note :- WPC Shall be measured and paid seprately. |
| 52 | Supply only water proofing compound ISI marked complete all as specified & directed by Engr in Charge. |
| 53 | S&F APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/sqm , reinforced with polyster non-woven fabric (weighing not less than 150 gm/sqm and upper side of membrane thermally insulated with white mineral gravel finish, informaly embadded during manufacturing process shall only be used. It shall be laid by torch application,side overlaps shall be 75mm and the ends shall be 100mm and all over laps shall be sealed by torch application including applying a coat of cold applied bitumen primer conforming to IS:3384@0.40kg/sqm & applied a Hot blown coat of bitumen layer spread over primer @ 2.0 Kg/Sqmcomplete all as specified & directed by Engr in Charge. |
| 54 | M&L for Preparing surface for roof treatment by removing all looase gravel ,dirt ,oil & foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application,provide 75X75mm coving made out of PMC mortar as above on all joints of vertical up stands to ensure does not exceed 5% immediately before application of liquid membrane material incorporation & protection to be provided ,applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm with 1st coat appllied in water ratio (ratio elastomeric liquid water proofing membrane :water will be 3:1) as primer, after the 1st coat is completly dry becomes slightly darker than apply 2nd coat with undiluted elastomeric water proofing liquid in criss -cross direction with roller .spread glass fibre mesh reinforcement of 1mm thickness with overlap of 50mm in both direction when the surface is still tacky . After the drying of of 2nd coat completly apply the final coat of undiluted elastomeric water proofing liquid in a direction parpendicular to previous coat .the min. thickness of dry film of complete application should not be less than the as recommanded by manufacture. the overall dry thickness should not be in any case less than 1.5mm complete all as specified & as directed. |
| 55 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation, boards/slabs/blankets, any thickness, including cover fillets and frame workcomplete all as specified & directed by Engr in Charge. |
| 56 | M&L for providing and fixing Gypsum Board 8 to 10 mm thick in ceiling fixed with screws as per manufacturers instructionscomplete all as specified & directed by Engr in Charge. |
| 57 | S&F 4mm thick Everest designer E-Board fixed or laid/inserted to timber/GI/Aluminium ceiling frame work with screws complete all as directed by Engr-in-Charge |
| 58 | S&F anodised aluminiumsnap grid frame workof size 605x605mm for false ceilingcomplete all as specified & directed by Engr in Charge. |
| 59 | S&F hangers 6mm dia. G.I (up to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GIflat 40x3mm size 60 mm long and hold fasterners 12.5mm dia 40mm long. complete all as specified & directed by Engr in Charge. |
| 60 | S&F in repairfor PVC wall panelling in repair withpanel of 300 mm x 4 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angel fixed with solvent cement complete all as specified as manufacturer"s Instructionscomplete all as specified & directed by Engr in Charge. |
| 61 | Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame)complete all as specified & directed by Engr in Charge. |
| 62 | S&F for sollid PVC door frame of size 50mmx47mm made out of 5mm plain colour pvc sheeet reinforced with m.s. squre tubecomplete all as specified & directed by Engr in Charge. |
| 63 | Supplying & fixing in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail; Panelling of plain colour PVCsheet to be fitted in the M.S. frame welded/sealed to the stiles & railswith suitable PVC sheet beading, and joined together with solvent cement all as specified and shown on SSR 2020 (Part-II)complete all as specified & directed by Engr in Charge. |
| 64 | S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI markedcomplete all as specified & directed by Engr in Charge. |
| 65 | S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixedcomplete all as specified & directed by Engr in Charge. |
| 66 | S&F 75 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including weldingcomplete all as specified & directed by Engr in Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
