Uttar Pradesh Industrial Development Corporation Limited has published Tender For Up-Gradation Of Electrical Network And Street Light System At I.A. Jainpur And Gc Jainpur Kanpur. Submission Date for this Tender is 20-07-2023. Street Lighting Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supply and fixing ofLED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 90 watt confirming to IP 66 and above protection complete in all respects (With 5 Year Gurantee all type Repair And MaintenaceCatt. AA as per UPPWD Sch. No.1423 (Bajaj /Philips/Crompton/Wipro Make) |
| 2 | Supply & Fixing of 32 mm Dia 1.20 Mtr long G.I Pipe Bracket for fixing of LED lights complete in all respects with clampetc. |
| 3 | Supply & fixing of ""D"" clamp of size 50x6 mm flat iron on ST poles/Steel rail Poles with Bolts, nuts and washers etc. complete in all respect as per UPPWD Sch. No. 623 |
| 4 | Supply & fixing of 100 x 110 mm shackle insulator /100 x 80 mm pin insulator including G.I. Bolts/ spindle nuts etc.Complete in all respect.as pre UPPWD Sch. No. 621 |
| 5 | Supply and wiring of 4 sq. mm Copper conductor PVC insulated unsheathed Two core cable including all T&P men and material for proper completion of work.(Polycab /KEI/ Havells/ Grandle/gloster Make ) |
| 6 | Supply, sagging, jointing and binding of insulated ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect.UPSIDC Sch. No.E10.08 |
| 7 | Supply & wiring of submain with 2 Nos. of 2.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cables in existing conduit complete with supply of all material labour and T&P reuired for proper complation of the work as directed as site byEngineer I/C as Per UPPWD sch No. 289(Polycab /KEI/ Havells/ Grandle/gloster Make ) |
| 8 | Supply & laying 16 sq mm 2 core Al. conductor PVC insulated armoured, served, sheathed cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(c) & 507(Polycab /KEI/ Havells/ Grandle/gloster Make ) |
| 9 | Supply & laying 25 sq mm 3.5 core Al. conductor PVC insulated armoured, served, sheathed cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(j) & 507(Polycab /KEI/ Havells/ Grandle/gloster Make ) |
| 10 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheathed ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (c) 16 sq. mm 2 core |
| 11 | S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheathed ,underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connectedwith the earth as per direction of Engineer - incharge as per UPPWD sch. no. 503 (j) 25 sq. mm 3.5 core |
| 12 | S/F of palm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (d) 16 sq. mm |
| 13 | S/F ofpalm or pin type copper tin plated cablesocket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (e) 25 sq. mm |
| 14 | S/B of 40 mm dia x 4.5 mtr. Long GI pipe vertical for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. From the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in GI pipe upto appron upto switch board 30 CM square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 701 |
| 15 | S/B of 600x600x6mm GI plate vertical for earthing with its top at least 3 M. below ground levelcomplete with20 mm dia. GI pipe and funnel for watering andone earthing leads of no. 8 to 10 SWG GI wire in 15 mm diaGI pipeupto switch board (from appron to switch board the cost of GI pipe snd GI wire be extra)30 CM square C.I. framewith hinged cover masonary housingalternate layers of charcoal /Coke and saltat least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 702 |
| 16 | Supply and laying of 25 mm x 3mm G.I. strip from earth electrode directly in the ground as required respects as per UPPWD Sch. No. 716 |
| 17 | S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(e) (25 Amp. TPN) for Old High Mast |
| 18 | S/F of following capacity of automatic street light cubical cantrol panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with cintractors HRC fuses, isolating switch metering instuments box with CTS etc. as per UPPWD Sch. No. 807(f) (40 Amp. TPN) |
| 19 | Supply & laying of 90 mm dia O/D HDPE DWC pipe ISI marked along with all accessories likesocket, bend, couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm delow ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as per Direction of E/I. |
| 20 | Supply, laying and fixing 50 dia GI pipe Trench Less Through manual Boggiincluding trenching 90 C.M. deep and refilling etc. |
| 21 | Painting of S.T.poles and all mountings on it with two coats of aluminium paint with an under coat of red oxide paint on length of the up to 10 m support above the ground level or as per direction of Engineer in charge of work/site including all T&P,men & material for proper completion of work. |
| 22 | Dismantling & re-grouting of Street liht 12 Tilt/sick bend/STP pole in 1:3:6 ratio cement concrete with stone pad including stranthening of pole by providing additional 04 nnos. Support of 65X65X6mm or higher size MS angle in suitable length with the help of welding/cutting as per tecnical specification. |
| 23 | Dismantling & Re-Fixing of LED/Sodium lights on Repair Pole as per UPPWD Sch. No. 1422 |
| 24 | Supply and erection of doble pole 410-SP-56, 11 m long, 241 Kg complete with 1/6th of overall length of pole below ground level with 45 cm dia cement concrete with 45cm dia cement plinth around the pole and 45cm above the ground level. |
| 25 | Supply and fixing of 11 KV Disc & Disc fittings complete.UPSIDC E03.08 |
| 26 | Supply and fixing of 11 KV pim insulator complete.UPSIDC E03.07 |
| 27 | Supply and fixing of 100 mm dia G.I.pipes B,class for climbing up the cable from ground to over head line including all accessories,materials,labours and T&P required for proper completion of work as per specification.UPSIDC E25.01 |
| 28 | Supply and fixing of anticlimbing device fabricated from G.I. flat of 25 mmX6 mm size in a shape of ring of the pole size,having G.I.flat pointed fins of length 225 mm in 8 nos and also barbed wire in 200 mm length above the said ring including material. UPSIDC E26.01 |
| 29 | Supply and fixing of danger board fabricated from 10 gauge M.S.sheet as per I.E.Rules.UPSIDC E27.01 |
| 30 | Supply & fixing of straight MS Channel 100 x 50 mm 1.15 M long complete as per SIDC Sch. No. 36.02 ER(03.3.01) |
| 31 | Supply & fixing of clamp suitable for securing the above channel complete as per SIDC Sch.No.3(4) |
| 32 | Supply,sagging,tensioning,jointing and binding of ACSR Weasel conductor including cost of aluminium tape binding wire and jointing sleeves complete in all respects including material,men an T&P for proper completion of work.UPSIDC E.10.(a) |
| 33 | Supply and fixing of 11KV TPMO Switch of 400 amps. Copmlete in all respect as per direction of Engineer in charge complete incuding all T&p, men and material required for proper completion. |
| 34 | S/F of 11 kV three phase D.O. fuse set complete with suitable clamps, nuts & bolts, fuse wire etc. |
| 35 | Supply, installation, testing & commissioning of outdoor type Al. wound oil cooled transformer of rating 25 KVA, 11/0.433 KV complete as per IS-1180-2014 Level-I as per approved list of UPPCL . |
| 36 | Supply & laying 70 sq mm 3 core Al. conductor XLPE insulated PVC bedded galvanised flat steel striparmoured, served, sheathed cable 1100 V garade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 506 & 507 (Polycab /KEI/ Havells/ Grandle/gloster Make ) |
| 37 | Supply & laying of 120 mm dia I/D HDPE DWC pipe ISI marked along with all accessories likesocket, bend, couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm delow ground level ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as per Direction of E/I. |
| 38 | S/F of Heat Shrinkable jointing kit suitable for XLPE 11 KV HT cable outdoor type including all materials, labour and T&P required for proper competion of work. (Denson/ birla/3m/ |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
