|
| 1 | Supplyof 150 Liter capacity Water Coolar of Usha make with Refrigarator R-22 havying cooling capacity 150 Liter with extra large stainless steel body with water tap 2 Nos complete in all respects.App |
| 2 | Supply of 4 KVA copper wound Stabilizer range 140-280 with plug top complete in all respects.App |
| 3 | Installation and Comissioning charges of Water Coolar incl. connection complete in all respects.App |
| 4 | Construction of 2.00m x 1.50 m x 2.80 m Water Coolar Cage made out of 50x50x5mm M.S. angle iron with 10 SWG welded wire mesh of size 1”x2”galvanized G I Sheet of 24 SWG on roof, top and side to protect the coolar from rain. The foundation of cage shall be of 0.15m in 1:2:4 cement concretebase and brick work in1:6 cement and fine sand. The flooring of the cage should be 6” base concrete in the ratio of 1:6:12 and 4.00mm thick and plaster in 1:2:4 plain including painting with aluminium paints. The job includes supply of all materials, Labour T&P required for proper completion of work. (As per civil schedule Analysis) |
| 5 | S/F of Chlorinated Polyvinyl Chloride CPVC Pipes of 15mm dia cpvc Pipe for Water Coolar Fittings,clamps including all materials, Labour etc complete in all respects.DSR 18.9.1 |
| 6 | S/F of Chlorinated Polyvinyl Chloride CPVC Pipes wash out pipe of 40mm dia cpvc Pipe for wastage water drain from Water Coolar connection complete in all respects. DSR 18.9.5 |
| 7 | S/F of brass stop cock of approved make complete in all respects. DSR 18.16.1 |
| 8 | S/F of brass bib cock of approved make complete in all respects. DSR 18.15.1 |
| 9 | S/F of uplasticised PVC connection pipe with brass unions 30cm length 15mm dia PipeFittings including all materials, Labour etc complete in all respects.DSR 18.21.11 |
| 10 | Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.701 |
| 11 | S/fixing of one number 8 to 6 SWG G.I. Wire in 15mm dia. G.I. Pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sandlabour. T & P required for proper completion of the work as directed at site.721 |
| 12 | S/fixing of power plug with 15A/250 V flush typemodular switchand 5 pin 15A/250 V flush type universal socket on concealed M.S. box including supply of all materials labour T&C etc. required for proper complete in all respects.1139 A |
| 13 | S/F of 6 Amp to 32 Amp SPMCB (10 KA) C Curve Cat A. 1002 |
| 14 | S/F of 6 Amp to 32 Amp. DPMCB (10 KA) C curve Cat A. 1009 |
| 15 | S/F surface/flush mounting 4 way SPN distribution board with additional metal door without MCB complete in all respect and as directed at site. Cat B. 1022A |
| 16 | S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 6sqmm 2 core. 501 A |
| 17 | Supply and Hosting of syntax or equivalent Make High Density Polyethylene sheenless moulded Tank and placing in position. The Job is inclusive of all taxes,Labour T&P and other material for proper completion of work as directed by Engineer in charge at site.DSR 14.48A |
| 18 | Drilling of 150 mm dia T/W bore suitable for 110mm dia pipe/200mm dia T/W bore suitable for 140 mm dia pipe all complete with labour T/P as per direction of engineer incharge. Jal Nigam |
| 19 | Supply and lowering of 110 mm dia 6kg/cm2 PVC pipe/140mm dia 10kg/cm2 with plastic net cover slots of pvc pipe by UPIN(phenolex or apb by E/I) all complete (ISI mark only) SOR 2017-18.Jal Nigam |
| 20 | Supply and pouring of pee gravels suitable for T/W bore all complete as per direction of engineer incharge.Jal Nigam |
| 21 | S/F of 110mm PVC pipe adopter suitable for item no. 2.Jal Nigam |
| 22 | Supply of 1HP submersible pump set with starter UPIN 65m head ( Pluga/Crompton Greeves/KSB).GEM |
| 23 | Supply and fitting of 4sqmm 3 core copper wired cable (ISI mark) complete in all respect.Jal Nigam |
| 24 | Supply and lowering of 40 mm dia ribbed screen Ashirvad PVC pipe (ISI marked)/ 32 mm dia G.I. Pipe by UPIN and fixed with boat site threaded SS nipple all complete.Jal Nigam |
| 25 | Transportation of all material T&P etc to the site of work, loading, unloading and proper stacking at the site including return cartage of unused material with the diging the pit of boring work including supply all labour T&P with with arrangement of water required etc all complete.Jal Nigam |
| 26 | Installation of 1.00HP submersible motor pump with 32mm G.I. Lowering, submersible cable 4sqmm & installation of starter including supply of labpur, T&P etc complete in all respect.Jal Nigam |
| 27 | devlopment of bore hole till the discharges of water become free from sand and turbidity by compression and disinfection of bore including supply of all labour T&P.Jal Nigam |
| 28 | Chemical & bacteriological testing of water sample.Jal Nigam |
| 29 | S/B of 600mm x 600mm x 6.0mm GI plate vertically for ear thing with its top at least 3 meters below ground level complete with 20mm dia G.I. pipe and funnel for watering and one ear thing leadof one no. 8 to 10 SWG GI wire in15mm dia G.I. pipe up to switch board (from apron to switch board the coast of G. I. pipe and GI wire will be extra) 30 cm square C.I frame with hinged cover masonry housing alternate layers of charcoal /coke and salt at least 150 mm thick all-round etc. as per directions of E/I complete in all respects.702 |
| 30 | S/F of 32mm dia G. I. Pipe complete with G. I. Fittings,clamps including all materials, Labour etc complete in all respects.DSR 11.6.1 |
| 31 | S/F of CP brass stop cock 15mm of approved make complete in all respects. DSR 7260 |
| 32 | S/F of 6 Amp to 32 Amp SPMCB (10 KA) C Curve Cat B 1002 |
| 33 | S/F of 6 Amp to 32 Amp. DPMCB (10 KA) C curve Cat B 1009 |
| 34 | S/F of CP brass bib cock 15mm of approved make complete in all respects. DSR 7257 |
| 35 | S/F of gun metal non return valve 32mm of approved make complete in all respects. DSR 1934 |
| 36 | S/F of 32 Amp 415 Volt TPN Metal Clad Rewirable type switch fuse unit on angle iron bracketcomplete in all respects.315 |
