|
| 1 | Schedule \"A\" |
| 2 | Demolition of concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in- Charge. |
| 3 | Roughening surfaces of old concrete by sweepping clean and washing downwith water to remove dust complete all as specified. |
| 4 | M&L for 15mm thick rendering to sides and bottom of sunken slab in CM 1:3 withwater proofing compound, finishing the surfaceseven and smooth without using extra cement,(WPCshall be measured seperately) |
| 5 | M&L for cement concrete type B0 using 12.5 mm graded aggregate in sunken floors 25mm thick complete all as specified. |
| 6 | S&F GI spouts 40mm dia projecting at least 20 cm clear of the wall. |
| 7 | M&L for applying two coats of hotbitumen 85/25 grade @ 1.70 Kg/Sqm over vertical surfaces and floor of sunken slab after laying all CI connection branch pieces etc after covering joints with PCC 1:2:4. |
| 8 | M&L for Type D21:4:8 (Nominal Mix)using 20mm graded crushed stone aggregate mixed with water proofing compound @ 3% by weight of cement as in concrete padding,laid to require slope,including finishing the concrete surface fair and even without using extra cement. complete all as specified and directed. |
| 9 | M &L fortype F2PCC1:7:12(40mm graded aggrigate)as infillingofsunken slab after laying carrying out required tests for CI pipes joints. |
| 10 | S & F grating doom 125mm dia with waste hole of PTMT (minimum weight 40gms) |
| 11 | S & F grating doom 100mm dia with waste hole of PTMT (minimum weight 25gms) |
| 12 | S & F in repair for PVC waste pipe 32mm dia heavy duty fix to coupling complete all as specified |
| 13 | Supply only water proofing liquid chemical for use in concrete/rendering surfaces of wall, floor in sunken pit, manholes and floortraps etc.Note : It will be used according to the instructions.2. chemical product. Fosrok, sikka or equilent |
| 14 | M/L 25 mm thick cement concrete type B-1 1:2:4 (20 mm graded aggregate ) as in leveling coarse complete all as specified |
| 15 | M/L screed bed or bedding layer of mortar 15mm thick for laying floor finishesin CM 1:6 complete all as specified |
| 16 | M&Lfor anti skid colour ceramic tiles of size 300 x 300 x 6 to 7 mm thicklaid in floorsset & jointed in neat cement slurry & pointed in coloured cement to matchcomplete all as specified |
| 17 | M&Lfor glazed ceramic tiles of size 400 x 400 x 6 to 7 mm thicklaid in floors& skirtingset & jointed in neat cement slurry & pointed in coloured cement to matchcomplete all as specified and directed |
| 18 | Taking down cementplaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified |
| 19 | M/L Rendering 10mm thickin CM 1:3as backing coat on stone masonry surfaces or surface other than fair face ofbrick work or on one side of lathing complete all as specified and directed |
| 20 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregateas in sub base, plinth protection complete all as specified and directed |
| 21 | S&F in repairs vitreous china European type wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat black closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacitywhite in colour and PVC flush pipe 32mm dia complete all as specified and directed by Engineer -in- Charge. |
| 22 | S & F in repairs PVC low level flushing cistern plastic valvewith inlet ball valve float chain and ball (of capacity 10 liters) ISI Markedincl 32mm PVC flush pipe complete all as specified and directed |
| 23 | S&F in repairs Vitreous china wash basinof size 630 x 450 mm of selectedcolour including all fittings/ brackets complete fixed in repairs complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F pillar taps 15mm bore cast copper alloy screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipeand fixed in repairs |
| 25 | S&F fancy type chromium plated stop cock 15mm bore cast copper alloy screwed down high pressure with crunch or butter fly handle screwed both ends for iron pipeand fixed in repairs |
| 26 | S&F bib tap chromium plated cast copper alloy with crutch or butter fly handle screwed down for iron pipe fixed in 15 mm bore pipe as fixed in repairs complete all as specified |
| 27 | Dismantling of 500 ltr capacity of PVC water tanks. |
| 28 | Dismantling of 1000 ltr capacity of PVC water tanks. |
| 29 | S&F Rotational molded polyethylene 500 ltr capacity of water storage tanks (cylindrical/ vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 30 | S&F Rotational molded polyethylene 1000 ltr capacity of water storage tanks (cylindrical/ vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 31 | Cleaning and removing all scale and dirt, etc from 500 ltr capacity of tanks (PVC, RCC) and from mouths of circulating pipes in any position and location etc including opening wash out and cleaning with chlorine powder inside tank and closing the wash out etc complete, capacity of tank including to write clean on date in the surface of water tank etc:-(Note:- Letters for clean on date will be paid separately) |
| 32 | Cleaning and removing all scale and dirt, etc from 1000 ltr capacity of tanks (PVC, RCC) and from mouths of circulating pipes in any position and location etc including opening wash out and cleaning with chlorine powder inside tank and closing the wash out etc complete, capacity of tank including to write clean on date in the surface of water tank etc:-(Note:- Letters for clean on date will be paid separately) |
| 33 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high with best quality synthetc enamel paint complete all as specified and directed. |
| 34 | M&L for Writing stops, commas, short lines, dashes, hyphens, brackets etc with best quality synthetc enamel paint complete all as specified and directed. |
| 35 | S/F PP-R Ballvalves (brass insert) as per requirement of the site.Bore of pipes 15 /20 mm complete |
| 36 | Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 37 | Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 38 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 39 | S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 40 | Refixingof old 20mm GI tubing and connectionson new or old position (walls, ceilling, floor etc) complete all as specified and as directed. |
| 41 | Refixingof old 15mm GI tubing and connectionson new or old position (walls, ceilling, floor etc) complete all as specified and as directed. |
| 42 | Taking down chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge. |
| 43 | Taking down chowkats or frames exc. 1.5 sq. m but n exc 4 sqmeachwith shutters (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge. |
| 44 | Taking down shutters of any descriptionexc 1 sq. mand n exc 2 sqm each complete all as specified |
| 45 | M/L PCC 1:2:4 type B2 40 mm graded aggreagate as in hold fast covering complete all as specified. |
| 46 | S/F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete |
| 47 | S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified |
| 48 | S/F 2nd class hard wood 40 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed |
| 49 | S/F35 mm thick 2nd class hard woodglazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass complete |
| 50 | S/F factory made solid panel pvc doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 51 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed by Engr-in- Charge |
| 52 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 53 | S/F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 410-0 or Fe 310-0complete all as specified |
| 54 | S/F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescomplete |
| 55 | M/L hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engr-in-Charge. |
| 56 | M/L 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each panecomplete |
| 57 | M/L For new surface 2 coats of synthetic enamel paint over a coat pinkprimer on woodensurface including preparation complete |
| 58 | M/L new surface 2 coats of synthetic enamel paint over a coat primer red oxide on newly steel surface including preparation complete |
| 59 | S/F Repair 100 mm s/s butt hinges complete all as specified |
| 60 | S/F 100mmextruded alhandles, fabricated type polished complete all as specified and directed by Engr-in-Charge. |
| 61 | S/F 150mmextruded aluminium alloy handles, fabricated type polished complete all as specified |
| 62 | S/F150 mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. |
| 63 | S/F 300 mm dia aluminium sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified |
| 64 | M/L Making good under cills or over arches, lintels and bressummers, including all-pinning when necessary in CM 1:4 in stone walls complete all as specified and directed. |
| 65 | Demolition of brickwork or stone/boulder masonry, built in cementmortarand precast concrete articles complete all as specified and directed by Engr-in-Charge. |
| 66 | M/Lbrick work with sub class \"B \" bricks straight or curved on plain exc 6m Mean radius built in CM 1:6 complete all as specified |
| 67 | M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces of wall finished even and fair without using extra cement complete all as specified and directed.( Dhimapur sand) |
| 68 | M&Lfor rendering in CM 1:4 with two layersof 10mm + 5mm cement plaster with water proofing compound @ 2% by weight of cement or as per manufacture\"s instrs having smooth and fair finish all as specifiedand directed by engineer - in - chargeNote :- (1) Use ofDimapur Sand to plaster. (2) WPC pdr shall be measured and paid separately. |
| 69 | S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors. |
| 70 | S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors. |
| 71 | S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls. |
| 72 | S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls. |
| 73 | S&F in repairs PVC (SWR) bends of any radius of 110mm dia. With oval and access door |
| 74 | S&F in repairs PVC (SWR) bends of any radius of 75mm dia. |
| 75 | S&F in repairs PVC (SWR) branch piece (single ‘Y’) equal or unequal for 110mm dia PVC pipe. |
| 76 | S&F in repair PVC(SWR) branch piece (single ‘Y’) equal or unequal for 75mm dia PVC pipe. |
| 77 | S&F in repair for PVC (SWR) junction (single ‘T’) with access door for 110mm dia pipe. |
| 78 | S&F in repairfor PVC (SWR) junction (single ‘T’) with access door for 75mm dia pipe. |
| 79 | S&F in repairfor PVC (SWR) vent cowl suitable for 110mm dia PVC pipe. |
| 80 | S&F in repairfor PVC (SWR) vent cowl suitable for 75mm dia PVC pipe. |
| 81 | S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement dia of outlet in 75mm. |
| 82 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 83 | M&L for granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing types including 15 mm thick bedding layer in CM 1:6 |
| 84 | S&F in repair vitreous china squatting pan, orissa pattern size 580x440 white with integral foot rest (excluding flushing cistern and flush pipe) complete fixed. Make-Hindware. |
| 85 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl existing and taking down complete all as specified. |
| 86 | S&F as in replacement stainless steel plate rack of size 24\" x 36\" x 10\" complete all as specidfied and directed. |
| 87 | Complete removal of vegetables, uprooting of trees / plants on the surface of buildings roofs/ walls etc and applying pesticidesas permanufacturing instructions complete all as specified and approved by Engr-in- Charge. |
| 88 | Supply only oil putty for glazing |
| 89 | Supply only 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 90 | Supply only galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm. |
| 91 | Supply only Grating doom 100mm dia of PTMT (Minimum weight 25gms) |
| 92 | Supply only Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 93 | Supply only wire nails of any size. |
| 94 | Supply only Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. |
| 95 | Supply only Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 96 | Supply only soap dish ( Make: Prayag) |
| 97 | Supply only Over head shower with Arm( Make: Prayag) |
| 98 | Supply only Plywood 4 mm Thick (Make : Green Ply) |
| 99 | Supply only PVC connection with brass nut washer at both ends 45 cm long |
| 100 | Supply only 3 mm thick Glass panes (Make : Saint Gobin) |
| 101 | Supply only Aluminium Door stopper |
| 102 | Supply only PVC connection with brass nut washer at both ends 30 cm long |
| 103 | Supply only PVC connection with brass nut washer at both ends 60 cm long |
| 104 | Supply only Plastic water tank 500 Ltr |
| 105 | Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern |
| 106 | Supply only Brasschromium plated shower rose 125mm size |
| 107 | Supply only PVC valveless, syphonic action type,10 litres flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets |
| 108 | Supply only 15mm Galvanised steel tubes, medium grade |
| 109 | Supply only 20mm Galvanised steel tubes, medium grade |
| 110 | Supply only Chromium plated health faucet (ABS Body) with 1.2m long PVC tube & wall hook complete all as specified and directed. (Make: Jaquar Continental Cat no ALD-IVY-583 or equivalent in Kohler / Cera / Parryware / Marc) |
| 111 | Supply only 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. (Make : Jaquar) |
| 112 | Supply only 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe. (Make : Jaquar) |
| 113 | Supply only 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe. |
| 114 | Supply only 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe. |
| 115 | Supply only 50 Kg Cement Bags |
| 116 | Supply onlywooden screw25mm to 40mm long.(Size as reqd)100 Nos per Pkt |
| 117 | Supply onlywooden screw 15mm to 20mm long(Size as reqd) 100 Nos Per Pkt |
| 118 | Supply only stain less steel grating for floor trap 100mm dia.(Make-Prayag & Equivalent) |
| 119 | Supply only plain aluminium sheet 0.56mm thick. |
| 120 | Supply only M Seal 500gm pack. |
| 121 | Supply only mild steel Helical door spring 250 mm long |
| 122 | Supply only white cement in 1 Kg pack. (Make Birla) |
| 123 | Supply only PVCWaste pipe 32 mm for WHB |
| 124 | supply only PVC Waste pipeforUrinal |
| 125 | Supply only PVC Waste pipefor sink |
| 126 | Supply only PTMT PVC Float valve 20 mm with Rod and ball(Make -Prayag or Equivalent or ISI Mark) |
| 127 | Supply only GI Nipple 15 x 150mm ISI Marked |
| 128 | Supply only GI Nipple 15 x300mm ISI Marked |
| 129 | Supply only GI socket reduser 20mm x 15mm ISI Marked |
| 130 | Supply only GI socket 15mm ISI Marked |
| 131 | Supply only GI Union15 mm ISI Marked |
| 132 | Supply only GI Elbow 15mm ISI Marked |
| 133 | Supply only GI Elbow 20mm ISI Marked |
| 134 | Supply only GI Tee 15mm ISI Marked |
| 135 | Supply only GI Tee20 mm ISI Marked |
| 136 | Supply only GI socket reduser 25mm x 15mm ISI Marked |
| 137 | Supply only Thread Roll |
| 138 | Supply only Fevicol SH in 1 Kg packing |
| 139 | Supply only MS window peg stays long |
| 140 | Supply only Plastic rawl plug 40 mm long. |
| 141 | Supply only Rubber cill door bottom |
| 142 | Supply only PVC Flushing Cistern Handle Set |
| 143 | Supply only Flushing Cistern Syphon Washer |
| 144 | M&L for cupboard shutter in required size at site made out of 20mm rigid PVC sheet consisting of carcase & provision of shutter are required brackets 5.5 screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 1mm edge bend type or 900 edge bend finish as per make and specification mentioned as per drawings. Various thickness of PVC celuka sheet manufactured by ISO 9001-2015 satisfied company termite proof, water proof and flame retardant PVC sheet. PVC cabinet of required sizes fabricated by joining for 20mm rigid PVC sheet fixed with each other using solvant cement adhesive and screws and 6mm PVC sheet as backing of cabinet fixed with screws and solvent cement adhesive etc. PVC shelf/ partition of required size consisting of panel 20mm rigid PVC sheet and for supporting the hold of shelf , partition and shall provided 3 edges in sizes 20mm x20mm as per required length, The front side of the edge visible in the front of the shelf. Partition to be edge lipped by 20mm width into 1mm edge bend tape of density 600 kg per Cbm with necessary connected items like handle, hinges etc complete all as specified and directed by ENgr-in-m Charge and manufactures specifications and drawings. |
