Tender For Dindigul City Municipal Corporation Providing And Fixing Of Road Furniture For Short Term Engineering Measures Of Special Task Force On Road Safety 2023-2024 At Kamarajar Bus Stand
Tender Value
3.51 Lakhs
Estimated cost
Bid Submission
05 Jul 2023
0 days left
EMD
3510
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dindigul → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Dindigul City Municipal Corporation Providing And Fixing Of Road Furniture For Short Term Engineering Measures Of Special Task Force On Road Safety 2023-2024 At Kamarajar Bus Stand Providing And Fixing Of Road Furniture For Short Term Engineering Measures Of Special Task Force On Road Safety 2023-2024 At Kamarajar Bus Stand
BOQ
| Sl. No. | Item Description |
| 1 | Providing and Laying of Hot applied Thermo Plastic Compound 2.5mm thick including reflectorising Glass beads at 280 Gms.Per Sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35.The finished surface to be level, uniform and free from streaks and holes etc., complete (As per MORT&H specification 803) |
| 2 | Providing and fixing reflective road studs of \"Category A\" Raised pavement markers made out of poly carbonate / methylmethecrylate/ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity vlaues conforming to ASTM D4280. The feflective raised pavement markers shall also confirm to the MORTH circular NO: RW / NH. 33023 / 10 / 97-DO.III dt: 11.06.1997. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13wq.cm on each side and the slope to the base shall be 35 +/- 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2mm and height not less than 30 +/-2mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D 4280 and confirming to IRC 35-2015 guidelines and MORT&H specification 804 etc., complete. |
| 3 | Providng and erecting of Retro- Reflectorised Cautionary, Mandatory andinformatory signs (without definition board) made out of High intensityPrismatic Grade Sheeting confirming to Type- IVstandards of IRC-67: 2012 and ASTM D4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angel and supported on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60cm size inculding cost and conveyance of all materilas, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro - Reflectro sheet shall consist of minimum coefficient fo Retro - reflection as per Table 6.6 ofIRC 67: 2012.The retro - reflective sheeting shall be covered under 7 year warrantyissued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC:67:2012 (as per MORT & H Specification No.801) |
| 4 | 90cm Equilateral Triangle |
| 5 | 60 cm Circular |
| 6 | 80 cm x 60 cm Rectangular |
| 7 | Solar Blinkers, Supplyingof Solar Power Blinker,Including SolarPanel 60Wp, Solar LED Blinker with 300 MM DIA (LED-192 no\"s) - Red and Yellow, Charge Controller - 12V/SA,SMF 40AH I 12V Battery,Visible Distance - 1000 Meters, 24 Hours operation, Battery Enclosure, Panel Mounting Structure, Mounting Brackets and other accessories, Pole height 17\" feet. Civil Works: ( Including Land Leveling, Cleaning and digging pits & concrete post grounding )Erection And Commissioning Work:Pole erection and leveling of pole,Testing and connection of batters, charger controller and solar panel wiring work |
| 8 | Providing fixing of median marker double sided made of polycarbonate for impact resistance and good weather ability polycarbonate used for molding the median marker shall have a minimum Izod impact strength value of 600 J/m at room temperatue. The impact strength of the poly carbonate should not decrease to less than 70% of its initial value on being subjected to UV weathering as per ASTM G 155 for 1000 hours or exposure to 2 years of natural weathering. The body of the median marker shall be in the form of an isosceles trapezoidal structure of length 15cm height and width of 10 x 10 cm. The median marker shall have fluorescent yellow retro - reflective sheeting confirming to Tpe XI specifications as per ASTM D 4956. Area of reflective sheeting should not be less than 70 cm2. Edge of retro reflective shall be concealed using a grill/ mesh/ similiar mechanism to prevent vandalism and sheeting pilferage. The logo of the manufacturer shall be embossed and painted in contrasting colour on both side of median marker for distinct identification. |
| 9 | Providing and Erecting of Retro - Reflectorised Hazard Marker Traffic sign made out of High Intensity Prismatic Grade sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle post 75 x 75 x 6mm and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge. High intensity Retro- Reflectro sheet shall consist of minimum coefficient of Retro - reflection as per Table 6.6 of IRC 67-2012. The retro - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67-2012. (as per MORTH specification No.801) |
AI Tender Summary
Tender Timeline
Jun 29, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 05, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender