Bhakra Beas Management Board-BBMB has published Tender For Construction Of New Storage Tank With Tiles At Bbmb Water Supply At Nangal Township. Submission Date for this Tender is 03-08-2023. Tanks and Cylinders Tenders in nangal Punjab. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth, Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone Boulders, Kankar and Building Rubbish, Earth. (CSR Item No.5.2 (i)) |
2 | Scraping of cement plaster (CSR Item No.8.31 (c.)) |
3 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. (CSR Item No.11.4(i)) |
4 | 20mm thick cement plaster 1:4 in two coat work (CSR Item No.15.20) |
5 | 12.5mm thick cement plaster 1:6 (CSR Item No.15.11) |
6 | Cement concrete 1:6:12(b) With stone aggregate 40mm gauge(ii) mixing by mechanical means using concrete mixer volumetric type (CSR Item No.10.8 b ii) |
7 | Cement concrete 1:2:4 (a) With stone ballast or shingle(ii) mixing by mechanical means using concrete mixer volumetric type (CSR Item No.10.13 a ii) |
8 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 mm & 300x300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (CSR Item No.14.126) |
9 | Anti-skid floor tiles 10mm thick in flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with white cement slurry in joints including corners angles and beading. (CSR Item No.14.72) |
10 | Structural steel work in angles, tees and flats, riveted or welded including cutting fixing all gusset plates, bolts, nuts, rivets, welding rod, etc. with hoisting and erecting in position. (CSR Item No.18.3 (a)) |
11 | Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40%. should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(b) 0.60 mm (+ 0.05 %) thick" (CSR Item No.13.27 iii b) |
12 | G.I. Sheet gutters 0.80mm thick semicircluar 15cm diametre including fixing with clamps and making connections with rain water pipes. (CSR Item No.13.22) |
13 | Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects. a) For ordinary soil having gravel upto 40% (CSR Item No.28.1 (a) (ii)) |
14 | Excavation by mechanical means (JCB or hydraulic excavation) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides leveling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil outside/insidetown involving lead upto 15 m complete in all respect.a) For ordinary soil having gravel upto 40% (CSR Item No.28.2 (a)(ii)) |
15 | Providing, laying, fixing, testing and commissioning of ‘c’ class heavy duty MS Pipeconforming to Indian Standard IS: 1239/3589 including fittings like tees, bends, sockets, elbow, flanges, tapers, nuts bolts, gaskets etc.in ground with anti-corrosivetreatment with wrapping coating taps (4mm pypkote tape) as per IS: 10221 including cost of primer etc. excluding cost of excavation and refilling completein all respects. c) 200mm internal diameter (CSR Item No.28.105 (c)) |
16 | Providing, laying, fixing, testing and commissioning of ‘c’ class heavy duty MS Pipeconforming to Indian Standard IS: 1239/3589 including fittings like tees, bends, sockets, elbow, flanges, tapers, nuts bolts, gaskets etc.in ground with anti-corrosivetreatment with wrapping coating taps (4mm pypkote tape) as per IS: 10221 including cost of primer etc. excluding cost of excavation and refilling completein all respects. b)150mm internal diameter (CSR Item No.28.105 (b)) |
17 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (B) Class PN-1.6 as per ISI (d) 200 mm i/d sluice valves flanged (CSR Item No.28.27 B (d)) |
18 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). (B) Class PN-1.6 as per ISI (c.) 150mm i/d sluice valves flanged (CSR Item No.28.27 B (c)) |
19 | Providingand fixing in position cast iron foot valves flanged ends with rubber sheet as per IS: 4038 including cost of nut bolt, rubber insertion complete in all respect. (b) 200mm i/d cast iron foot valves (MR) (NS) |
20 | Providing and fixing in position Cast Iron Foot valves flanged ends with rubber sheat as per IS 4038 including cost of Nut Bolt , rubber insertion complete in all respect (e) 150mm i/d Cast Iron Foot valves (CSR Item No.28.131 e) |
21 | Providing & Fixing ISI marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including, Jointing & cost of nut bolt, rubber insertion etc. complete Note:- if Non-returnvalves class PN-1.6 is used instead of class PN-1.0, then 5% will be paid extra. B.Class PN-1.0 as per ISI with gun metal flap (e)200mm i/d Non-return valve (CSR Item No.28.31 B e) |
22 | Providing & Fixing ISI marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including, Jointing & cost of nut bolt, rubber insertion etc. complete Note:- if Non-returnvalves class PN-1.6 is used instead of class PN-1.0, then 5% will be paid extra. B.Class PN-1.0 as per ISI with gun metal flap (d)150mm i/d Non-return valve (CSR Item No.28.31 B d) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail