Supply Of All Materials, Labour, T&P Etc. For Construction Of Over Head Tank (On Turn-Key Basis), Pump House, Staff Quarter, Boundary Wall, Gate, Site Development, Supply Of All For Laying & Jointing Of Rising Main, Distribution System Including All Labou
Tender Value
18.99 Crore
Estimated cost
Bid Submission
12 Jul 2023
0 days left
EMD
19 Lakhs
Bank guarantee accepted
Document Fee
23600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
babarpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply Of All Materials, Labour, T&P Etc. For Construction Of Over Head Tank ( On Turn-Key Basis ) , Pump House, Staff Quarter, Boundary Wall, Gate, Site Development, Supply Of All For Laying & Jointing Of Rising Main, Distribution System Including All Labour And T&P Etc. Complete In All Respects And Construction Of Tube Wells Including Plc Scada Automation Of All Tubewells As Per Specifications In Tender Document Complete In All Respect Including Commissioning, Testing, Trial & Run, Defect Liabilities And Handing Over The Complete Works To Babarpur Ajitmal Nagar Panchayat. Water Supply Reorganization Scheme With Its Appurtenant Works In Babarpur Ajitmal Nagar Panchayat At District Auraiya Of Uttar Pradesh.
BOQ
| Sl. No. | Item Description |
| 1 | O.H.T.1550 KL/23 Meter StagingSupply of all the materials, labour, T&P etc. complete and construction of a RCC OverHead Tank of 1550 KL capacity at 23m Staging above ground level including 1.00 m wide PCC apron around with 15cm semicircular PCC drain, One meter wide RCC staircase from ground level up to balcony to top dome and inside the tank body, one meter wide RCC Balcony around the tank at junction point of vertical and conical wall with proper railing of 20mm dia medium quality GI Pipe in three rows on both sides of staircase, balcony and at the top dome and each landing supported on proper ventilator at top dome, water level indicator, lightening conductor as per latest ISS and electricity rules 0.60m dia medium pattern CI manhole cover hinged with locking arrangement supply and fixing and jointing vertical pipes for inlet, outlet overflow and washout with all jointing material for proper completion and other appurtenant works including excavation in all type of soil. Painting of all concrete surface and steel pipe works with three coats of approved quality/weather coat paint. |
| 2 | C.W.R.100 KL Capacity.Supply of all the materials, labour, T&P etc. complete and construction ofRCCclear water reservoir of 100 KL capacity including appurtenant works such as stair from ground level to the top to theCWR , G.I. railing, ventilating, manhole with covers, water level indicator, lightening conductor as per latest ISS and electricity rules, PCC apron anddrain and painting on exposed surface with three coat of water proof cement paint, inlet, outlet, overflow and washout system including construction of pumping plant and pump house as per requirement of pump house set and with bearing capacity test of soil at 8 M.T./sqm etc. complete in all. |
| 3 | Pump House Supply of all materias,labour & T&P and ConstructPump house (3.60m x 3.00m x 3.60m) cum chloronome (1.80m x 1.20m x 3.0m) and bypass chamber as per departmental type design & drawing. |
| 4 | RISING MAIN AND BYE PASS ARRANGEMENTExcavationof earth in all type of soil with lift upto 1.5m.and carting of following size & type of pipes from site store tosite of work, lowering the same into the trenches true to the alignment andjointing with the specialsincluding testing of pipe line and also including supply of all materials required specials and all taxes and excise duty etc. and filling of excavated earth in to trenches, watering and ramming etc. required for proper completion of the work |
| 5 | Excavation in Ordinary Soil |
| 6 | Excavation in soil mixed with moorum, bajri & Pebble etc. |
| 7 | Supply, laying, carting of following size & type of pipeline and specials with all jointing material as per IS 8329/2000 or its latest amendments including F.O.R destination and all taxes and insurance etc complete. |
| 8 | 200 mm dia class K-7 |
| 9 | 350 mm dia class K-7 |
| 10 | Supply ofC.I.D/F sluice valves and carting from site store to site of work and lowering them in already prepared trenches, fixing in to posion and jointing withrequired C.I.specials all taxes & duties etc. required for proper complecetion of work. |
| 11 | 200 mm diaSluice valve |
| 12 | 350 mm diaSluice valve |
| 13 | Supply of all materials, labour &T&P etc. and construction of sluice valve chamber(1.20m x 1.00 m) masonary type as per departmental type design & drawingwith surface box fixed in RCC chamber covers. |
| 14 | Supply of all materials, labour, T&P etc. and construction of cement concrete thrust block in 1:2:4 mix at bend and Tee etc of size 1.00m x 1.00m x 0.6m150 mm dia to 200mm dia |
| 15 | Distribution SystemExcavationof earth in all type of soil with lift upto 1.5m.and carting of following size of pipes from site store tosite of work, lowering the same into the trenches true to the alignment andjointing with the specialsincluding testing of pipe line and including supply of all materials required specials and all taxes and excise duty etc. required for proper completion of the work and filling of excavated earth in to trenches, watering and ramming etc. |
| 16 | Excavation for Ordinary soil. |
| 17 | Excavation for soil mixed with kankar, Moorum, Bajri etc. |
| 18 | Supply, laying, carting and specials of following type of pipes with all jointing materials such as socket ,rubber gasket as per IS 4985/2000 and IS 1239 (Part -I)/2004 and IS 8329/2000 or there latest amendment includingF.O.R destination and all taxes and insurance etc complete. |
| 19 | 90 mm dia HDPE pipes (PE-100) class 6kg/cm² |
| 20 | 110 mm dia HDPE Pipe (PE-100)6Kgf/cm2 |
| 21 | 140 mm dia HDPE Pipe (PE-100)6Kgf/cm2 |
| 22 | 160 mm dia HDPE Pipe (PE-100)6Kgf/cm2 |
| 23 | 200 mm dia D.I. Pipe Class K-7 |
| 24 | 300 mm dia D.I. Pipe Class K-7 |
| 25 | Supply, carting and fixing of Following C.I.D./F fittings As per IS : 14846 including transportation, taxes, labour & T&P etc with all specials lowering them in to the trenches, fixing in posion and jointing true to alignment and testingrequired for proper completion of the work. |
| 26 | 80 mm dia |
| 27 | 100 mm dia |
| 28 | 125 mm dia |
| 29 | 200 mm dia |
| 30 | 250 mm dia |
| 31 | 300 mm dia |
| 32 | Scour Valve 80 mm dia |
| 33 | Fire Hydrant80 mm dia |
| 34 | CI Single ball type Air Valve 25 mm dia |
| 35 | Supply of allmateriallabour & T&P and constructfollowing type chamber as per departmental type design & drawing. |
| 36 | Masonary Type |
| 37 | Fire Hydrant Chamber |
| 38 | Air Valve Chamber |
| 39 | Surface Box Type |
| 40 | Supply of allmaterialslabour & T&P etc and cross the nala, culverts upto 1.5 to 6.0m wide coming in the alignment and encasing the pipe with m.s. pipes for protection including road cutting etc. |
| 41 | Dismentling of following type of road pavements for laying of pipe line & Making House Connection, sorting out and stacking of serviceabe material and disposal of unserviceable material with in a distance of 50m from the centre of trenches, including supply of all material, labour & T&P etc. required for proper completion of the work |
| 42 | Bitumen Road |
| 43 | C.C. Road |
| 44 | Interlocking Road |
| 45 | BOE Road |
| 46 | Reinstatement of following type of road pavements for laying of pipe line & Making House Connection, sorting out and stacking of serviceabe material and disposal of unserviceable material with in a distance of 50m from the centre of trenches, including supply of all material, labour & T&P etc. required for proper completion of the work |
| 47 | Bitumen Road |
| 48 | C.C. Road |
| 49 | Interlocking Road |
| 50 | BOE Road |
| 51 | Making house connection with saddle clamp and brass ferrule including 15mm dia GI medium class upto 10m length, HDPE-100-PN 6kgf pipe 20 mm dia and adopterincluding dismantelling of road and excavation & backfill of soil including all material labour T & P etc complete in all dia of distibution system As per departmental drawing. |
| 52 | 90 mm dia |
| 53 | 110 mm dia |
| 54 | 140 mm dia |
| 55 | Construction of staff quarter (Single Room Set)including supply of all materials, labour T&P etc. all complete as per departmental design & drawings. |
| 56 | Construction of recharge unit including supply of all materials, labour T&P etc. all complete as per departmental design & drawings. |
| 57 | Construction of boundary wall around water works and pump houses including supply all Materials, Labour, Tools and Plants etc. complete. |
| 58 | Supply & fixing of 3.6 M wide MS Gate and 1.2 M wicket gate including fabrication and supply of steel and construction of boundary pillars all complete. |
| 59 | Construction of Interlocking approach road including supply of all materials, labour, tools and plants etc. complete. |
| 60 | E&M Work Drilling of Borehole for Tubewell construction by DC Rig Machine including tranportation, errection, dismantling of Rig and associated T&P complete in all respect including required all matreials,labour, Barricading, Pit & water arrangement, Approach road arrangement and other essential work Errection of Rig machine etc.Transportation , erection of rig machine (6x1) |
| 61 | Drilling by DC Rig machine up to 70Mtr deep and 600 mm diameter. (6X70) |
| 62 | Drilling by DC Rig machinefro 71 Mtr up to 100 Mtr deep and 500 mm diameter. (6X30) |
| 63 | Drilling by DC Rig machine from 101 Mtr up to 200 Mtr deep and 500 mm diameter. (6X100) |
| 64 | Drilling by DC Rig machine from 201 Mtr up to 220 Mtr deep and 500 mm diameter. (6X20) |
| 65 | Dismantling of Rig machine(6X1) |
| 66 | Electric Logging of bore hole by Electric logger. (6X1) |
| 67 | Tube Well AssmeblyMS tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plains) rings, well cap, well plug, clamp, reducer, centre guide, support structure etc as required & as per typed design complete in all respect.300 mm diameter (6x66) |
| 68 | 200 mm diameter (6x134) |
| 69 | Lowering of tubewell assemly duly welded including welding electrode and shrouding of pea gravel complete in all respectLowering 300 mm diameter pipe from0Mtr upto 66 Mtr (6x66) |
| 70 | Lowering 200 mm diameter pipe from66Mtr upto 100 Mtr (6x34) |
| 71 | Lowering 200 mm diameter pipe from101 Mtr upto 200 Mtr (6x100) |
| 72 | Development of Tube Well by Air CompressorTransportation,Errection,Dismantling of 350 PSI compressor (6x1) |
| 73 | Charge of development by 350 PSI compressor (6x 60) |
| 74 | Development of Tube Well by O.P.UnitTransportation,Erection,Dismantling of 2/3 cusec O.P.Unit and yield testing (6x1) |
| 75 | Charge of development by 2/3 cusec O.P.Unit (6x 100) |
| 76 | Chemical and bacteriological test of water sample. |
| 77 | Supply of pea gravel (6x61) |
| 78 | S.I.T.C of Pump Set1000 LPM, 40 mts head, 2900 RPM clear water submersible pumping plant suitable to operate on 415 ± 10% volt 50Hz, 3 phase A.C. supply with suitable switch gear panel. (4x1) |
| 79 | S.I.T.C of Pump Set1000 LPM, 65 mts head, 2900 RPM clear water submersible pumping plant suitable to operate on 415 ± 10% volt 50Hz, 3 phase A.C. supply with suitable switch gear panel. (2x1) |
| 80 | S.I.T.C of 150 mm dia. 7.1 mm thick Main Piping with 48 mtr column pipe, power wiring complete in all respect with all required material, T&P labour etc. (6x1)Main Piping and valves with 48 mtr column pipe.(a) 150 mm dia 7.1 mm thick M.S. column pipe 48.0 mts long (each pipe length 3 mtr.), with both end flanged and groove for passing 3 phase PVC copper conductor submersible cable60 m with 1 M long top pipe with cap (Dumdum) and sealing ring.1. C.I. D/F 90 bend of size 150 mm Dia. 1 No.2. C.I. A/F Tee of size 150 mm Dia. 1 No.3. M.S. Distance piece of 150 mm Dia 1.0 M long 2 Nos. and 1.5 m long 1 No.4. M.S. Enlarger/reducer of suitable size 1 No. |
| 81 | Tool Set with Kit(6x1)1. Pipe wrenches 350 mm2. D/E Spanner - 6 Nos3. Adjustable wrench 300 mm4. Screw Drivera. 12 x 250 mmb. 8 x 250 mmc. 5 x 250 mm5. combination plier 200 mm6. Nose plier 200 mm7. Hammer with handle 1 Kg.8. Line tester |
| 82 | Lifting Tackle2 Tone capacity 4.0 M lift, spur geared chain pulley block (6x1) |
| 83 | Electro mechanical typechlorinating plant. (6x1) |
| 84 | Electrification of pumphouse(internal & external) (6x1) |
| 85 | Pole mounted solar based 12 Watt LED light (6x4) |
| 86 | S.I.T.C. of 25 KVA unballanced type 3 Phase Servo Voltage Stablizer Copper wound AC Supply 50 Hz, input voltage 240v-500 v and output voltage 415± 1% with complete wiring and earthing. (4x1) |
| 87 | S.I.T.C. of 40 KVA unballanced type 3 Phase Servo Voltage Stablizer Copper wound AC Supply 50 Hz, input voltage 240v-500 v and output voltage 415± 1% with complete wiring and earthing. (2x1) |
| 88 | Ce & UL Certified PLC/RTU in IP 65 enclosure suitable to communicate with GSM Bases modem unit with CPU And power supply with analog & didital parametrefeaturecas specified forceachtubewell /OHT & stand alone OHT to store and transfer data on GSM backbone, RTU.PLC Designd with logic to tranfer data at multi stations as as specified in tender technical specification sheet. (6x1) |
| 89 | GPRS base wireless communication Modem for RTU/PLC capable to tranfer and gather data from remote site to control station, all accessories including with signal anteena for pumping plant and internet charges as specified in tender technical specification sheet. (6x1) |
| 90 | CE/UL approved manufaturer\"s Intelligent smart energy meters. (6x1) |
| 91 | Digital Soft Starter for 14 kw (for 1000 lpm 40 Mtr. Head) (4x1) |
| 92 | Digital Soft Starter for 19 kw (for 1000 lpm 65 Mtr. Head) (2x1) |
| 93 | Auto Phase reversal unit/Automatic transfer switch with inbuilt time delay & enclosure.100 Amp Auto Phase Reversal Unit (6x1) |
| 94 | CableComplete cabling for tubewell including all power and control cable of all equipments in pump house and OHT (6x1) |
| 95 | Control panel with IP 54 protection, industrial grade for all equipment separate for control (24v) and power equuipments. (6x1) |
| 96 | CE/UL approved manufacturer\"s Surge protector for all AC control supplies of all equipments.(6x1) |
| 97 | CE/UL approved manufacturer\"s 7\" HMI touchscreen suitable communication with PLC/RTU, for local display & control of process parameters. (6x1) |
| 98 | 150 mm dia Sluice Valves with Integrated Actuator(for 150 mm-6 Nos.) (6x2) |
| 99 | CE/UL approved manufacturer\"s Electromagnetic Flowmeter. (for 150 mm-3 No.)(6x1) |
| 100 | 150 mm. Dia reflux valve. (6x1) |
| 101 | GaugesCE/UL approved manufacturer\"s Smart Pressure Transmitter. (6x1) |
| 102 | CE/UL approved manufacturer\"s Sub soil water level transmitter / Hydro static type level transmitter for submersible depth measurement. (6x1) |
| 103 | CE/UL approved manufacturer\"s Radar type Level Transmitter for OHT. (6x1) |
| 104 | Installation, commissioning & testing for one tubewell. (6x1) |
| 105 | 3 Month Trail run of T/w with SCADA Operation.(6x1) |
| 106 | Supply of Hypo Chloride Solution for Six tubewell and One CWR etc. (For 1000 lpm Tw-6 Nos.) (For 2000 lpm CWR-1 No.) |
| 107 | VT Pumping Plant :- S.I.T.C. of of2000 LPM, 36 mtr Head,1450 RPM self water lubricant VT pump set with VHS TEFC induction motor (Operating Voltage 415 V±10%, 3 Phase, 50 Hz) with 4.5 mts Column Assembly. |
| 108 | MOTOR CONTROL PANNEL :-Supply of M.S. Fabricated Dust and Vermin Proof, Cubical Type, Floor Mounted Control Panel compatible to SCADA with RS485 Port consisting as following :-INCOMING :-1 No. M.C.C.B. motorizes & microprocessor based200 Amp capacity.OUTGOING :- (i) 3 Nos. Outgoing 100 Amp motorized and microprocessor based MCCB suitable for above Pumpset with suitable size Capacitor Bank.(ii) 1 No. MCCB 63 Amp & 1 No. MCCB 32 Amp for lighting and fan |
| 109 | Main piping and valves150 X 250 X 250 mm size C.I.,A/F Tee |
| 110 | 150 mm M.S. D/F pipe 0.5 mt long |
| 111 | 150 mm M.S. D/F pipe 1 mt. long |
| 112 | 250 mm M.S. D/F pipe 2 mt. long |
| 113 | 250 mm M.S. D/F pipe 1.5 mt long |
| 114 | 250 mm dia C.I.D/F. Bend- 90 degree |
| 115 | 250 mm size M.S. blind flange |
| 116 | Nut bolt and rubber packing for jointing as per requirement |
| 117 | Other material such as dismantling joints, reducer in largeras required at the time of installation |
| 118 | S.I.T.C. of 2 Ton Capacity 6.00 mt Lifting Tackle Manual with traveling trolley. |
| 119 | Tools & Sppanners Complete as per Tender Doc. |
| 120 | INSTALLATION of above Pump set and Main Piping Valve, Cabling with Cable tray etc. |
| 121 | Supply, installation of Dry Powder type Fire Extinguisher (4 Nos.) and fire Bucket with stand. |
| 122 | Internal & External electrification of CWR |
| 123 | Electromegnatic dozzer of suitable capacity SCADA compatible. |
| 124 | Water works Campus with Solar Panel LED light. |
| 125 | Electrical resistance sheet (2m. x 1m. X 12mm) |
| 126 | Painting |
| 127 | Testing and commissioning |
| 128 | HT PanelS.I.T.C. of indoor type floor mounted metal clad, 11 KV, 630 Amp. VCB panel with 1No. incommer VCB & 2Nos outgoing VCB totally enclosed, Copper Bus Bar & horizontal drawout, horizontal/ vertical isolation type breaker as per IS with all necessory protection and also should be compatible to SCADA operation |
| 129 | Supply of 70 Sq.mm 3 core XLPE cable from 11 K.V.UPPCL metering panel to H.T. incoming Panel, and H.T. panel to Transformer.(IS 7098) |
| 130 | TransformerS.I.T.C. of 100 KVA, 11/0.44 KV, 3 Phase, 50 Hz, Dyn 11, indoor ONAN type, copper wound transformer with OFF load tap changing arrangement on HV side in steps of +7.5% & -15%, LV side @ 2.5% stapping complete with all accessories i/c first filling of filtered dehydrated oil and confirming to IS 1180 level 1 & as per specificationcomplete in all respects as required at site. |
| 131 | Supply of LT Panel comprising of following details. 02 No. 250 Amp. Incoming MCCB Panel shall be mechanically and electrically interlocked completely and 01 Nos 250 Amp MCCB as Outgoing and 01 Nos 63 Amp Outgoing for Auxiliary Load suitable capacity with motorized and microprocessor based suitable for SCADA and all necessary protection equipments and metering equipment as per requirement. |
| 132 | Supply of H.T. Cable end termination joint kit. |
| 133 | Complete in all respect. Earthing system shall executed as per IS : 3043 and I.E. rules. |
| 134 | Supply of 1.1 KVgrade 120 sq mm 3.5 core PVCinsulated Armored Aluminum cable fromTransformer to L.T. Panel. (IS 7098) |
| 135 | Installation and commissioning of 11 KV/0.44KV, substations 100 KVA, Transformer including HT Panels and L.T.panel including all labor T&P complete in all respect. |
| 136 | Supply and Laying of Rubber Sheet (as per Tender Document) and 11/33 KV grade shock resistance sheet |
| 137 | S.I.T.C. Transformer Fencing, Painting with all necessary and required material. |
| 138 | Supply , installation of Dry Powder type Fire Extinguisher (04 Nos.) and fire Bucket with stand. |
| 139 | NOC for substation from safety department |
| 140 | S.I.T.C. of 100 KVA unballanced type 3 Phase Servo Voltage Stablizer Copper wound AC Supply 50 Hz, input voltage 240v-500 v and output voltage 415± 1% with complete wiring and earthing. |
| 141 | CE & UL Certified PLC/RTU with redudant CPU & Power supply in IP 54 enclosure sutable to Communicate with GSM based modem unit with redudant CPU & Power Supply with annalog & digital Parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer sata at muliple stations as specified in tender technical specification. |
| 142 | G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. |
| 143 | MAIN PIPING AND VALVES :-(for 2000 LPM VT Pumps) (with actuater suitable to SCADA operation)Reflux Valve 150 mm Size |
| 144 | Reflux Valve 250 mm Size |
| 145 | Sluice Valve 150 mm Size with integrated Actuator |
| 146 | Sluice Valve 250 mm Size with integrated Actuator |
| 147 | CE/UL Certified Electromagnetic Flowmeters250mm Size |
| 148 | Soft StatrterSoft starter with RS 485 Port- 400 V Class, 22 KW, Rating (suitable for VT motor) |
| 149 | Auto Phase reversal unit / Automatic switch with inbuilt the delay & enclosure of suitable size for CWR Pumping Station. |
| 150 | CE/UL Certified Radar type Level Transmiter for CWR |
| 151 | Ultrasonic Level sensor with RTUs communication for OHT |
| 152 | CE/UL Certified Pressure transmitter for each pump. |
| 153 | CE/UL Certified Surge protector for control panel. |
| 154 | CableComplete cabling for CWR including all power & control cable of all equipments at ZPS and OHT (Upto 3 Pumps) |
| 155 | Control Panel with IP 54 Protection, industrial grade for all equipment.Separate for control (24 V) and power equipments. (Upto 3 Pumps) |
| 156 | Security Survelliance IP Camera |
| 157 | Installation, commissioning & testing for CWR |
| 158 | 3 Month Trail run for one CWR |
AI Tender Summary
Tender Timeline
Jun 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 12, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender