Tender For Restoration Of Main Carriageway Disturbed By Cmwssb For Laying Of 1400Mm1200mm Dia Pipeline Across The Road At Km 35Of East Coast Road
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Jul 2023
0 days left
EMD
28700
Bank guarantee accepted
Document Fee
10620
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Restoration Of Main Carriageway Disturbed By Cmwssb For Laying Of 1400Mm 1200Mm Dia Pipeline Across The Road At Km 35.000 Rhs And At Km 44.755 Nemmeli Desalination Plant And Reconstruction Of The Dismantled Median From Km 44.940 To 44.961 Of Ecr
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling ofPlain cement concrete by mechanical meansand disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separatelyas directed by the Engineer in charge and as per clause 202 of MoRTH |
| 2 | Earth work excavation in all classes of soils and sub soils to full depth or as may be directed except in rockrequiring blasting inclusive of shoringstrutting, bailing out water wherever necessary and disposal ofthe excavated earth with a lead of 5 Km from site etc. complete complying with standard specifications of clause 304 of MoRTH and as directed by the Engineer in charge |
| 3 | Plain cement concrete M 15 Grade (Ratio 1:2:4) using HBG crushed stone jelly of size 20mm gaugeincluding cost ofsoft water, labour charges for mixing, transporting,laying curing etc., complete complying with standard specificationof clause 1700 of MoRTHand as directed by the Engineer-in-charge for levelling course |
| 4 | Plain cement concrete M 20 Grade ratio 1:1.5:3using 20mm gauge hard broken granite jelly including cost of form work, soft water, labour charges for mixing, transporting, proper vibrating, laying curing etc., complete complying with standard specificationof clause 1500 & 1700 of MoRTH and as directed by the Engineer-in-charge for kerb. |
| 5 | Supplying, fabricating and placing in position steel reinforecement using mild steel or ribbed TOR steel rodsfor all RCC works as per design given by the Engineer-inchargeincluding cost of steel and binding wire and labour charges for fabricationetc., complete complying with standard specifications of clause 1600of MoRTH |
| 6 | Reinforced cement concrete M 20 Grade ratio 1:1.5:3 using 20mm gauge hard broken granite jelly excluding cost and fabrication of steel but including cost of form work, soft water, labour charges for mixing, transporting, proper vibrationg, laying curing etc., complete complying with standard specification of clause 1500,1600 & 1700 of MoRTH and as directed by the Engineer-in-charge |
| 7 | Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH |
| 8 | Providing and laying Prime Coat over WMM surface using 7 Kg of Emulsion Bitumen (SS1) per 10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 502 of MORTH |
| 9 | Providing and laying Tack Coat over WMM surface (treated with primer) using 2.50 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH |
| 10 | Providing and laying 50mm consolidated thick Dense Bituminous Macadam as per design mix using VG30 bitumen for premixing including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory / Pneumatic rollers and all other tools and plant required, includingall other incidental charges etc., complete as per specification using CMP as per clause 505 of MORTH |
| 11 | Providing and laying Tack Coat over Existing BT surface using 2 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH |
| 12 | Providing and laying Bituminous Concrete to 40 mm thick as per design mix usingVG30 bitumen for premixing including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc. including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory / Pneumatic roller and all other tools and plant required, includingall other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH |
| 13 | Providing and laying of good earth suitable for plantation including cost and conveyance of the earth to work site from approved quarry including all labor charges for laying, filling in layers etc., complete and as directed by the Engineer-in-charge for Median portion |
| 14 | Painting CC Surface with one coat of primer and two coats of synthetic enamel paintof approved quality and colour including thorough scraping, clean removal of dirt etc complete complying with standard specifications of clause 800 of MoRTH and as directed by the engineers incharge |
| 15 | Providing and laying of Hot Applied Thermoplastic compound 2.5 mm thick including reflecting glass beads @ 250 gms per sqm area, thickness is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, with all lifts and leads etccomplete as per MoRT &H Technical specification clause No.803 |
| 16 | Providing and fixing reflective road studs of \"Category A\" Raised pavement markers made out of poly carbonate/ methyl methercrylate/ ABS moulded body confirming to ASTM D 788 andreflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro-reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MoRTH circular No RW / NH. 33023/10/97- DO.III dt 11.06.97 . The height, width and length shall notbe less than 15mm, 90mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35+/5 degree. Each reflector shall have a CIL not less then values specified in table 2 of said MoRT&H circular. The strength of detachment of integrated cylindrical shanks, (of diameter not less than 19+/-2mm and height not less than 30+/-2mm) from the body is to be a minimum value of 500kg f. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation and complete as directed by the Engineer. The marker shall support a load of 13635 kg tested in accordance with ASTM D4280 and confirming to IRC 35-2015 guidelines and MORT&H specification 804 etc., complete |
AI Tender Summary
Tender Timeline
Jun 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 19, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender