|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS 20B and Sand, silt or other loose soil, wet sand, silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc., complete - Footings- First Depth Upto 2.00M |
| 2 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS 20B and Sand, silt or other loose soil, wet sand, silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc., complete - Plinth Beam |
| 3 | Supplying and filling in foundation andbasement with filling M- sand in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification. |
| 4 | Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge handbroken granitestone jelly for foundation including dewatering if foundnecessary and laid in layers of not more than 15 cmthick and compacted,etc., complete complying withstandard specfication. |
| 5 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam |
| 6 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such asrectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.(Column) |
| 7 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. - For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc. |
| 8 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) -Upto Basement |
| 9 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) - Ground Floor |
| 10 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. |
| 11 | Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9\"X43/8\"X 23/4\" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)- Upto Basement |
| 12 | Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9\"X43/8\"X 23/4\" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)- Ground Floor |
| 13 | Supplyingand filling in foundationandbasement with Good earth in layers of not more than 15cmthickwel rammed watered and compactedetc., complete complying with standard specification.- Basementfilling |
| 14 | Brick Partition walls in CM 1:3 (one cement & three sand) using IIclass ground moulded bricks of size 9\"X43/8\"X23/4\" using hoop iron reinforcement 2 Nos of 6mm dia M.S.rod at every three alternate layers and the cost shall inclusive of iron reinforcement, Brick work etc, complete as per standard specification - Ground Floor |
| 15 | Special ceiling plastering in all floors and finishing the exposed surface of RCC items of work such as slab, beam, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (One cement and three sand) 10mm thick including hacking the surfaces and providing cement mortar nosing, beading for sunshade, staircase, step, landing slab etc., including neat finishing and curing etc., complete complying with standard specification and as directedby the departmental officers. |
| 16 | Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications |
| 17 | Painting two coats of newly plastered wall surface with approved cement paint over cement plastered wall surface, ceiling andincluding preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required and cost of painting materials, brushes, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer |
| 18 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement |
| 19 | Finishing the top of floor with Granolithic Finish with CC 1: 2: 4 (one cement, two sand & four HBG jelly) using chips of grade 10 mm andbelow for 25mm thickness and rubbed smooth etc, complete as per standard specification |
| 20 | Dadooing walls withGlazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (one cement, two sand) over 10mm base layer plastering and pointing with white cement neatly as directed etc., complete as per standard specification |
| 21 | Solid PVC door shuttersusing19 Gauge19mmMS squaretubesforstylesandouterframes.15mmMS squaretubesfor top,lockandbottomrails.The stee tubesshallbecoveredwithSmmthicksolidPVC sheets.Shutter usingSmmthicksolid PVCsheetsfor panelingshall rigidlyfixed in position including necessaryfurnitureandfittings.Theoverallsizeof styles shall be 50mm x 30mm. The over all size of top rail,Lockrail and bottomrail shall be 75mmx 30mm Theoverallsizeofframesshallbe50mmx45mm with suitable rebate for housing the shutter and should haveprovisionto fixAL drops,towerbolthingesand lock plates inclusive of cost of allmaterials etc complete complying with thew standard specifications. |
| 22 | Providingand fixing louvered ventilatorfabricated from rollformedsectionsmadeofgalvanizedsteelcolour coatedorreportedtheystillasperIS513D quality galvanizedasperIS277withthezincof120grams per sqm) with the total coated thickness ofPaintspecification:courtatsectionsshouldbewith primer court of epoxy primer of 5-7 microns thick,Finishpaintedwith polyesterpaintof 12 - 16 microns thick,Dimensionsofthesections:thesectionforexterna frame should be 57 mm x 33 mmFixing details: the section should be cut to length joint with profile to profile componentAccessories:glass holding planes made of glassfilled nylonGlass:louveresto be providedwith 4 mm pin headed glassGrill: ventilatorshould be provided with grill made of 10mmsquareMSbarto12 mmxSmmflatat4 inch intervals.Totalgrillunitshouldbepowdercoatedandfixitto ventilator frame with screws.Theframesshouldbefixedtobrickorconcrete/ Masonrywallsandfloorbymeansofselfexpaning screws |
| 23 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 24 | StainlessSteel(SalemStainlessSteel)DoorFrame(Box Section using Stainless Steel Plate of 1 mm thick) of size 100 mm x 60 mm with a rebate of 30/ 35 mm x 15mmononesideoftheframeincludingsupplying andfixingdovetailsplayedendstainlesssteelHold fast etc.,PWD SOR P.NO 158Ra& nding, |
| 25 | Supplying&fixing doorshuttersforMediunDensity FiberBoardofexteriorgrade35mmthick,singIeleaf conforming toIS:12406/1989 with35x12mmT.W.Lippingonalledgeswithnecessaryadhesives and CP screws complying with standard specifications Therateisinclusiveof threeecoatsofbestquality varnishbutexcludingcostoffurniturefittings.suchas300 mm tower bolt 2nos,200mm towerbolt I no 300mmAldrop1No.Aluhandleornamentaltype2 Nos,and 1 No. Door stopper etc complete. |
| 26 | Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitaryfittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 110mm dia PVC 6KSC Pipe |
| 27 | Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitaryfittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications90mm dia PVC 6KSC Pipe |
| 28 | Supply and delivery and fixing of HDPE tank as per IS12701/1996includingloading,unloading transportation andlabourchargesforfixingofthe G pipes and specials for pipe connectionworks includingcutting, threading and fixing charges etc., |
| 29 | Supplying and fixing in position first quality and approvedvarietyofGunmetalGateValve/Whee Valve with BIS make of the following dia including cost of shellac,thread balls,etc.,completecomplyingwith standardspecifications (forbothinternalandexterna water supply arrangements).The valves to be used on workshall be got approvedby the ExecutiveEngineer before use on work.25mm Gun metal Gate Valve |
| 30 | Supplying and fixing in position first quality and approvedvarietyofGunmetalGateValve/Whee Valve with BIS make of the following dia including cost of shellac,thread balls,etc.,completecomplyingwith standardspecifications (forbothinternalandexterna water supply arrangements).The valves to be used on workshall be got approvedby the ExecutiveEngineer before use on work 32mm Gun metal Gate Valve |
| 31 | Supplyingandfixinginposition15mmdiabrassCPscrewdowntap/Pillartap(heavyduty)ofapproved makeconforming toBISspecificationsandquality including cost of shellac, thread, etc., complete complying withstandard specification andincluding cutting and threading wherever necessary.(Taps shouldbegotapprovedbytheExecutiveEngineerbefore use on the works) SD Tap |
| 32 | Supplyingandfixinginposition15mmdiabrassCPscrewdowntap/Pillartap(heavyduty)ofapproved makeconforming toBISspecificationsandquality including cost of shellac, thread, etc., complete complying withstandard specification andincluding cutting and threading wherever necessary.(Taps shouldbegotapprovedbytheExecutiveEngineerbefore use on the works)Pillar Tap |
| 33 | Supplying, layingandjointingPVC pipes (having working pressure 10 kg. I sq.cm) of approved quality and best variety conformingto BIS of the following dia includingcutting,threadingandfixingPVCspecials using PVC adhesives (butexcluding costofsuch specials)andfixingintowallwithteakwoodplugs PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantledportion to original conditionwith necessary brickwork/cementconcreteandplasteringneatly wherevernecessarywithnecessaryscaffolding charges, etc., complete complying with standard specifications. The PVCpipesshallbegotapproved by Executive Engineer before use on works.25mm dia |
| 34 | Supplying, layingandjointingPVC pipes (having working pressure 10 kg. I sq.cm) of approved quality and best variety conformingto BIS of the following dia includingcutting,threadingandfixingPVCspecials using PVC adhesives (butexcluding costofsuch specials)andfixingintowallwithteakwoodplugs PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantledportion to original conditionwith necessary brickwork/cementconcreteandplasteringneatly wherevernecessarywithnecessaryscaffolding charges, etc., complete complying with standard specifications. The PVCpipesshallbegotapproved by Executive Engineer before use on works.32mm dia |
| 35 | Supplying, laying and jointing PVC pipes (having workingpressure10kg./sq.cm)ofapprovedquality and best variety conformingto BIS of the following dia includingcutting,threadingandfixingPVCspecials using PVC adhesives (butexcludingcostofsuch specials)andfixingintowallwithteakwoodplugs PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to originalconditionwith necessary brickwork/cementconcreteandplasteringneatly wherevernecessarywithnecessaryscaffolding charges up to 4 meter height above ground level, etc. completecomplyingwithstandardspecifications.The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 36 | Supplying PVC Specials (with working pressure 10 kg/ sq.cm.) in water supply arrangements (both in interna and external water supply arrangements 25 mm DiaCoupler |
| 37 | 32 mm DiaCoupler |
| 38 | 25 mm DiaElbow |
| 39 | 32 mm DiaElbow |
| 40 | 25 mrr. DiaBEND |
| 41 | 32 mm DiaBEND |
| 42 | 25 mm DiaTee |
| 43 | 32 mm DiaTee |
| 44 | 25 mm DiaEnd Cap |
| 45 | 32 mm DiaEnd Cap |
| 46 | 20 mm x 15 mmReducer |
| 47 | 25 mm x 20 mmReducer |
| 48 | 32 mm x 25 mmReducer |
| 49 | 20 mm x 15 mmReducer Tee |
| 50 | 25 mm x 20 mmReducer Tee |
| 51 | 32 mm x 25 mmReducer Tee |
| 52 | 20 mm x 15 mmReducer Elbow |
| 53 | 25 mm x 20 mmReducer Elbow |
| 54 | 32 mm x 25 mmReducer Elbow |
| 55 | 25 mm Dia Jet Nipple |
| 56 | 32 mm Dia Jet Nipple |
| 57 | SupplyingandfixinginpositionPVCspecialsof the followingdia and typesof approvedquality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks dismantlingthemasonryorRCCworksandre-doing the dismantled portion to original condition etc. complete complyingwith standardspecifications. (The PVC specials should be got approved by the Executive Engineer before use on works).PVC Elbow 110mm dia |
| 58 | PVC Elbow 90mm dia |
| 59 | PVC Elbow with Door110mm dia |
| 60 | PVC Elbow with Door 90mm dia |
| 61 | PVC Tee 110mm dia |
| 62 | PVC Tee 90mm dia |
| 63 | PVC Tee with Single Door110mm dia |
| 64 | PVC Tee with Single Door90mm dia |
| 65 | PVC \"Y\"with Single Door110mm dia |
| 66 | PVC \"Y\"with Single Door90mm dia |
| 67 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications |
| 68 | Supplying and fixing in position 15mm dia C.P.Shower rose & stop cock ofapproved make confirming to IS specificationsandqualityincludingcostof Shellac thread etc. complying with standard specification. C.P. Shower Rose |
| 69 | Supplying and fixing in positionC.P. Towelrai 600mmlongand20mmdiawithbracketsofsame materialsincludingcostofteakwoodplugandC.P Screwsetc.completecomplyingwithstandardspecification. |
| 70 | Supplying and fixing in positionC.P. Soap tray of size150x150mmincludingcostofteakwoodplugand C.P.screws.etc.completecomplyingwithstandard specification. |
| 71 | Supplyingand fixing in positionIndian make Dewelled edgemirrorofsize600x450mmqualityincluding cost of Rawal plugs, brass screws. etc. complyingwith standard specification. |
| 72 | Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm \"P\" os \"S\"\" trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard specifications, labor inclusive of fixing lowlevel flushing tank. |
| 73 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 74 | Supplying laying and jointing the glazed S W pipes of 100mm size of approved quality with spigot and socket ends in dry condition with spun yarn and cement joints required depth for tranches including petty masonry,shoring and strutting wherever found necessary, and laying the pipeline in the alignment at the specified gradient and testing with necessary tools and plant etc. and levelling the ground complete complying with standard specifications. |
| 75 | Providing&fixingPVCRAINWATERDOWNFALL PIPEofthefollowingdiawith necessaryT.W.Clamps Plugs, Shoes,Bemds,other clamps, screws nails etc.,completecomplying withstandard specification The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mmin front& 200x75mmin rear (wall side) withadepthof110mm.Thepipeistobefixedby meansof\"U\"clampsatthecentreofpipestobe fixed.110mmdia PVC Pipe [4 Kg/SqCm] |
| 76 | Providing rain water harvesting using 3 No.of RCC wel rings of 90cm inner dia (clear) with Scm wall thickness madeoutof cementconcrete1:2:4using20mmhard brokenjellytoaheightof30cmeachsupplyingand fabricating 16 No. of 6mm dia MS rod verticallyand 3 No.of 6mm dia MS rod circumferentiallytied together with18guagebindingwireforwellringsincluding necessaryearth work excavation 1m dia toa depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1mdia and Scmthick whichinclusiveofcostandfabricationof6mmM.S reinforcementat15cmspacingsonbothdirections andone6mmM.Srodtiesattheedgeoftheslab circumferentiallyincludingcostofmoulding, curing finishingand well placing in position and disposingoff excavated earth with all initial leadsand lifts in places asshown by the Departmentalofficersetc.,complete in all respects. |
| 77 | Earthling as per ISI Specification with an earth electrode of 2.1mt class \"B\" GI pipe of dia not less than 40mmandwith20mmdiacopperearthflatofsize 125mm x50mmx6mm, with funneling arrangemen usingcharcoal,commonsalt,G.I.reducer,checknuts etc.,and masonry work and providing RCC cover slab 38mmthickfortheBrickmasonryincludingcostot steel and fabrication of reinforcementetc., complete in allrespectsasdirectedbythedepartmentalofficers (SD 233) |
| 78 | Supplying and run off 8 SWG copper wire on walls orbelow ground level with necessary ’U’ nails, earth work excavation andrefilling&includingthecostofal materialsetc., complete in all respects as directed bythe departmental officers.(SD 75) |
| 79 | Supplying and Fixing of 3 Phase DB with MCB 12 way TPMCB sheetsteeldistributionboards(flush type/surface type) fitted with bus bars and neutral links with three phaseMCBoutgoingsandseparate4 way provisionfor accommodatingOne No.4 pile incoming MCB/ Isolatorandanotherseparate4 way provision foraccommodating OneNo.4poleELCB/RCD (totally8waysinonesegment)(3x 4waysineach segment)andseparateprovisionsforMCB/lsolator (totally12 Nos.)forsubincomersin3segmentswith label holder etc.complete in all respects as directed by the departmental officers |
| 80 | Supply and run off 2 of 2.50sqm PVC insulated single coreunsheathedcopperconductorcableof1100V gradewithISImark confirmingtoIS:694/1990with continuous earthconnectionbymeansof1.50sqm PVCinsulatedsinglecoreunsheathedcopper conductorcableconfirmingto IS:694/1990in suitable PVCrigidpipe1.8mmthickconcealedinwall for mainsincludingthecostofPVCpipesandspecials cables, cement, brass screws, T.W plugs, saddles and labouretc., complete in all respectsas directed by the departmental officers. (derived from SD 55) |
| 81 | Supplyandrunoff2of1.5sqmmPVCinsulated singlecoreunsheathed copperconductor cableof 1100 V grade with ISI markconfirming to IS:694/1990 withcontinious earthconnectionbymeansof1.50 sqmPVCinsulatedsinglecoreunsheathedcopper conductorcableconfirmingto IS:694/1990insuitable PVCrigidpipe1.8mm thickconcealedinwall for mainsincludingthecostofPVCpipesandspecials cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers. (derived from SD 54) |
| 82 | Supplyand fixing of TNEB meter Board suitable for 32AThreephaseserviceconnectionwith32Afuse unit(500V)32Aneutrallinkandearthlink(1”x1/8\" Copperflat)onT.Wplankofsize 600mmx450mmx 19mm with supportingT.W.reepers of 1\" thickoneither sider with painting withsuitable bolt and nuts for fixingtheTWplankonwallwithearthconnectionand interconnectionwith7/20PVCinsulatedcopperwire from EBmeter to fuse unit. SD 127) |
| 83 | Supplyandrunof4core16Sq.mmPVCArmoured cableof 1100 V grade with ISI mark.(Part E r) V |
| 84 | Supplyandrunof4core10Sq.mmPVCArmoured cableof 1100 V grade with ISI mark.(Part E c) V |
| 85 | Wiringwith2x1.5sqmm 22/0.3)PVCinsulatedsinglecoreunsheathedcopperconductorcableof 1100VgradeinsuitablePVCrigidpipeconcealedin wall and ceiling with PVC accessoriesinflush with wal with 3mm thick hylumsheet cover with TW switch box and SA F.T. switch with continuousearth wire connectionof 14 SWG TC wire for making good of the concealed portion with suitable colourfor PVC concealedlightpoint/Fanpoint (ForElectronicregulator). SD 23 |
| 86 | Wiringwith2x1.5sqmm(22/0.3)PVCinsulated singlecoreunsheathed copper conductor cable of 1100VgradeinsuitablePVCrigidpipeconcealedin wall and ceiling with PVCaccessoriesinflush with wall with150x100x 113mmTWswitcnboxwith3mm hylumsheetcoverfor 5A3pinnoninterlockingCS plug with continuousearth wire connectionof 14 SWG TC wire and making good of the concealed portion with suitable colour ’or concealed PVC plug point. SD 38 |
| 87 | 18 W LED Tubelight for T8 Fitting Single side (15- e) |
| 88 | Supplying and Fixing 12\" (30cm dia) Light duty Exhaust fan includingcost of all Materials labour lift etc., Completed |
| 89 | Plain Cement Concrete 1:1.5:3 (one cement, one and half fine aggregates and three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges etc., complete as per standard specification |
| 90 | Supply and Delivery of Plastic litter bins 20 litters Capacity ect., as direct by the departmental officer |
| 91 | Supply and Fixing of wall mounted Sanitary Napkin vending machine storage Capacity 35 mechanical mode of operaction,insert coin value Rs 5 ect.,as direct by the departmental officer |
| 92 | Conducting Geophysical survey, quality and quantity test and transportation charges etc, (This includes labour charges in the field, rent of the vehicle for reaching the place, rent of the instrument and excluding charges for the geologist) |
| 93 | Drilling of 150mm dia vertical bores in hard rock formation to any required depth as directed by the departmental officers including labour charges for inserting casing pipe, assembling in the drilled hole, including welding the joints if necessary grouting the casing pipe etc, and including transportation charges for the rig and supporting vehicles from one place to another place.Over Burden Soil |
| 94 | Supply and delivery of unplasticised ribbed screen PVC casing pipe of the 150mm dia in 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS / 12818 / 1992 and as amended from time to time to suit the borewell upto 80m depth (C.S) with ISI marking including, loading, unloading , freight, stacking and transit insurance charges etc, complete.(TWAD Board Rates in Page No. 22) |
| 95 | Supply and delivery of clear water vertical wet type submersible pump conforming to is 8034/2002 and as amended threafter and BEE 3 Star Rated capable of discharging notes 20 lpm x 100 m against head of water column due to all causes. The pump shall be with stainless steel shaft and dyamically balaced bronze or Cast SS impeller, brass screws and CI FG 200 grade two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+- 10 %, 50 HZ +/- 5 %. (TWAD Board Rates in Page No: 100) |
| 96 | Labour charges for the erection of submersible pump set in bore well/open well including fixing and jointing submersible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges up to the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventer, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days.(TWAD Board Rates in Page No:308) |
| 97 | Supply and delivery of Single Phase Panel Board - Star Delta with two level Guard and auto start suitable for Submersible pumpsets and accessories including all fittings suitable for Submersible pump sets.Panel Board should be provided as per specification. Rates inclusive of Packing, Loading, Freight, Unloading, Stacking, Transit andInsurance charges etc, complete. (TWAD Board Rates in Page No:114) |
| 98 | Supply, delivery and fixing of UPVC pipe(un-plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure in residential areas do not normally exceed the maximum tolerance.(shedule - 40) 32mm dia etc.,(PWD Board Rates in Page No:112) |
| 99 | Supplying and fixing of PVC insulated and sheathed 3 core 4sq.mm Flat type Copper cable cofirming to IS 694/ 1990 and including cost and conveyance of all materials to site and labour charges etc, complete as per standard specification. (TWAD Board Rates in Page No: 120) |
| 100 | Supplying fixing of 32mm dia G.I pipe B class with ISI mark standard quality, standard weight including transporting the same to the site directed by the departmental officers etc complete |
| 101 | Supplyingand fixing of Bore well fittings as per standard specification as directed by the departmentaol officers etc., complete 32 mm Dia GI Elbow |
| 102 | 32mm Dia GI Nipple |
| 103 | 32mm CI flangeset with bolt nut insert rubber |
| 104 | 40 mm dia Mild steel clamp set |
| 105 | 32 mm dia GI Coupling |
| 106 | 32mm C.I. borewell motor Adoptor |
| 107 | 160mm Borewell pvc endcup |
| 108 | Nylon rope 8mm |
| 109 | 32mm Gate valve |
| 110 | 20mm PVC Tap |
| 111 | Wall mounted Napkin incinerator Machine, Electric heating napkin burning per day is 140 nos,Heating power 1200w,dimension 240x290x485 mm ect., as direct by the departmental officer |
| 112 | Wall mounted Stainless Steel body Hand dryer touch free infrared activation sensor range 12cm-15cm,Air speed 95m/s ect., as direct by the departmental officer |
| 113 | add for GST @ 18% |
