Tender For Repair Work Of Campus Boundary Wall At Iit, indore-Madhya Pradesh

Tender For Repair Work Of Campus Boundary Wall At Iit. 1 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan ) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. All Kinds Of Soil 2 Providing And Laying In Position Cement Concrete Of Specified Grade1:3:6 ( 1 Cement : 3 Coarse Sand ( Zone-Iii ) : 6 Graded Stoneaggregate 20 Mm Nominal Size ) Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 3 Filling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5 M. 4 Providing And Laying In Position Specified Grade Of Reinforced Cementconcrete, Excluding The Cost Of Centering, Shuttering, Finishing Andreinforcement - All Work Up To Plinth Level 5 Reinforced Cement Concrete Work In Walls ( Any Thickness ) , Includingattached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 5.2.2 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 6 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.5.22.6 Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More 7 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level.5.22A.6 Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More 8 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :B.Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 9 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 6.4.1 Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 10 Wall Painting With Acrylic Emulsion Paint Of Approved Brand Andmanufacture To Give An Even Shade : 13.60.1 Two Or More Coats On New Work 11 12 Mm Cement Plaster Of Mix :13.1.1 1:4 ( 1 Cement: 4 Fine Sand ) 12 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Including Primer And Enamal Painting Of Approved Colour And Brand. 13 Demolishing R.C.C. Work Manually / By Mechanical Means Includingstacking Of Steel Bars And Disposal Of Unserviceable Material Within50 Metres Lead As Per Direction Of Engineer - In- Charge 14 Demolishing Brick Work Manually / By Mechanical Means Includingstacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.15.7.4 In Cement Mortar 15 Removing White Or Colour Wash By Scraping And Sand Papering And Preparing Surface Smooth Including Necessary Repair Etc Complete.

Refer document

INR 31500.0 /-

INR 15.75 Lakhs /-

Name of Work: Repair work of Campus Boundary wall, at IIT Indore

Sl. No.	Item Description
1	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
2	Providing and laying in position cement concrete of specified grade1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level :
3	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
4	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
5	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
6	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more
7	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more
8	Centering and shuttering including strutting, propping etc. and removal of form for :b.Lintels, beams, plinth beams, girders, bressumers and cantilevers
9	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
10	Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : 13.60.1 Two or more coats on new work
11	12 mm cement plaster of mix : 13.1.1 1:4 (1 cement: 4 fine sand)
12	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Including primer and enamal painting of approved colour and brand.
13	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge
14	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.15.7.4 In cement mortar
15	Removing white or colour wash by scraping and sand papering and preparing surface smooth including necessary repair etc complete.