Annual Maintenance Of Existing Electrical Installations At Sub Divisional Hospital Sabroom South Tripura
Tender Value
4.80 Lakhs
Estimated cost
Bid Submission
13 Jul 2023
0 days left
EMD
9619
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sabroom → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Maintenance Of Existing Electrical Installations At Sub Divisional Hospital Sabroom South Tripura
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:- |
| 2 | Short Point :- |
| 3 | Medium Point :- |
| 4 | Long Point :- |
| 5 | Providing and fixing of 3 pin 6/10 amps plug point withmodulartype 6/10ampsswitch andsocketincludingconnectionwith 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modularswitch board, earthing the 3rd pin etc. as required:- |
| 6 | Providing and fixing of 3/6 pin 16/20 amps plug point withmodulartype 16/20ampsswitch andsocketincludingconnectionwith 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 7 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. |
| 8 | 2 X 1.5 sq mm |
| 9 | 2 X 2.5 sq mm |
| 10 | 2 X 4 sq mm |
| 11 | 2 X 6 sq mm |
| 12 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required. |
| 13 | 1 X 1.5 sq mm |
| 14 | 1 X 2.5 sq mm |
| 15 | 2X 1.5 sq mm |
| 16 | 2X 2.5 sq mm |
| 17 | 1 X 4 sq mm |
| 18 | 1 X 6 sq mm |
| 19 | 1 X 10 sq mm |
| 20 | 4 X 120 sq mm |
| 21 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required. |
| 22 | 5/6 amps piano type switch |
| 23 | 5/6 amps piano type call bell push |
| 24 | 3 pin 5/6 amps piano type socket |
| 25 | Angle/batten/pandent holder |
| 26 | Ceiling rose |
| 27 | Ding dong/Musical call bell |
| 28 | 2.5 mfd fan capacitor |
| 29 | Side holder for pin type CFL |
| 30 | 5 amps power top:- |
| 31 | 15 amps power top:- |
| 32 | Supplying and fixing of the following modular accessories including necessary connection etc. as required. |
| 33 | 6/10 amps one way SP switch (1M) :- |
| 34 | 16/20 amps one way SP switch (1M) :- |
| 35 | 3 pin 6/10 amps socket outlet (2M):- |
| 36 | 3/6 pin 16/20 amps socket outlet (2M):- |
| 37 | TV socket outlet (1M):- |
| 38 | 4 step fan regulator (1M):- |
| 39 | Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12\"x 12\" having locking arrangement including CC work, holes on earth pipe etc. as required. |
| 40 | Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required. |
| 41 | Supply and fixing of 25mm x 5mm GI strip on wall/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals. |
| 42 | Supply and fixing of the following sizes GIprongwith necessary nuts & bolts etc as required grouted on roof for Lightning protection. |
| 43 | G.I Prong 450 mm long |
| 44 | Supplying & fixing of 1200 mm sweep white color AC ceilingfan capacitor typedouble ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR)(ISI marked, BEE 1star/minimum service value 4.0 m3/min/W) : - |
| 45 | Supplying & installation of 400 mm sweep AC padestal fan with metal blade including connection etc as required:- |
| 46 | Supplying & installation of 400 mm sweep AC wall mounting fan with metal blade including connection etc as required:- |
| 47 | Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required:- |
| 48 | Supplying & installation of 450 mm sweep 1400 rpm metalic body exhaust fan including connection etc as required (ISI marked) :- |
| 49 | Supplying & installation of shutter for 380/450 mm sweep metalic body exhaust fan in the existing hole as required:- |
| 50 | Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required: |
| 51 | Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp):- |
| 52 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:- |
| 53 | 18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):- |
| 54 | 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 55 | 12 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 56 | Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 57 | 45 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 58 | 60 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 59 | 90 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 60 | Supplying and installation of industrial plug & socket complete with metal enclosure including necessary connection etc. as required of the following ratings (without MCB):- |
| 61 | 20 amps 230/240 volts single phase suitable for SP/SPN/DP MCB:- |
| 62 | Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:- |
| 63 | 63 amps 415 volts four strip Copper busbar chamber 4 ways of size (330mmx280mmx100mm):- |
| 64 | 100 amps 415 volts four strip Copper busbar chamber 4 ways of size (455mmx330mmx120mm):- |
| 65 | Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required:- |
| 66 | 63 amps 415 volts TPN main switch (rewireable):- |
| 67 | 100 amps 415 volts TPN main switch (rewireable):- |
| 68 | Supplying and fixing of powder coated sheet steel enclosure on surface/recess, suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connectionas required. |
| 69 | 2+4 / 6 way MCB DB (single door):- |
| 70 | 2+6 / 8 way MCB DB (single door):- |
| 71 | Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connectionas required:- |
| 72 | 6 to 32 amps SP MCB:- |
| 73 | 6 to 32 amps DP MCB:- |
| 74 | 40/50/63 amps FP MCB:- |
| 75 | Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:- |
| 76 | 40 amps DP isolator:- |
| 77 | 40 amps FP isolator:- |
| 78 | Supplying & fixing of following ratings TP/FP MCCB having breaking capacity 35/36 KA in the existing MCCB enclosure/ panel board including connection etc as required:- |
| 79 | 16 to 100 amps FP MCCB, Breakingcapacity 16/18KA (Thermal Magnetic):- |
| 80 | 200 amps FP MCCB, Breakingcapacity 25KA (Thermal Magnetic) :- |
| 81 | Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required. |
| 82 | 3 core 4 Sq mm |
| 83 | 2 core 6 Sq mm |
| 84 | Drawing of armoured/un-armoured cable with proper saddeling etc as required:- |
| 85 | Supplying and fixing of aluminium terminal ends (LUGS) - long barrel of following sizes : - |
| 86 | 4/6 sq mm |
| 87 | 10 sq mm |
| 88 | 16 sq mm |
| 89 | 150 sq mm |
| 90 | Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:- |
| 91 | 25 mm dia |
| 92 | 40 mm dia |
AI Tender Summary
Tender Timeline
Jun 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender