Public Works Department-PWD has published Tender For Sh Repair Mtc. Of Clariflocculator Unit, Replacement Of No-Return Valve, Ci Sluice Valve, Mushroom Valve Of Different Dia At 1.3 Mgd Surface Water Treatment Plant At Banduar, Udaipur During The Year 2023-2024.. Submission Date for this Tender is 13-07-2023. Sluice Valve Tenders in udaipur Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 2 | Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 3 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast/anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required. |
| 4 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 275mm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters & with handles, hold fast including embedding in cement concrete of required grade required for fixing in position, all necessary fittings, including applying of approved steel primer etc. complete as required:-i. 80xl.25mm M.S. laths with 1.25 mm thick top cover. |
| 5 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing Tiron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-in-Charge. |
| 6 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-a) In stringers, treads, landing etc. of stair cases including use of chequered plate wherever required, all complete. |
| 7 | b) In grating, frames, guard bar, railing, brackets, gates and similar works, all complete. |
| 8 | Welding by gas or electric plant including transportion of plant at site etc. complete as per standard design. |
| 9 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 10 | Providing testing & tigthtening of high strength friction grip bolts (HSFG bolts ) of class / grade EN 8 up to proof load as per IS 4000, including required threading, using automatic calibrated torque wrench at all locations & all heights and their compitable nuts & washers all complete required to execute the job. All HSFG bolts, nuts & washers confirming to IS 1367, IS 6610 & IS 4000 shall be used. The measurement shall be made for complete assembly of bolt, nut & compitable washers used in permanent works. |
| 11 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : i. 5.5 mm thick glass panes |
| 12 | Providing and fixing C.I. non-return valve of approved quality as per CPWD specification & direction of the Engineer-in-Charge. i. 100 mm nominal bore |
| 13 | ii. 125 mm nominal bore |
| 14 | iii. 150 mm nominal bore |
| 15 | iv. 200 mm nominal bore |
| 16 | Providing and fitting fixing C.I. sluice valve( with cap )complete with bolts, nuts, rubber insertions etc.(the tail pieces if required will be paid separately) as per CPWD specification & direction of the Engineer-in-Charge. i. 125 mm dia. PN 1.6 |
| 17 | ii. 150 mm dia PN 1.6 |
| 18 | iii. 200 mm dia PN 1.6 |
| 19 | iv. 250 mm dia PN 1.6 |
| 20 | v. 300 mm dia. PN 1.6 |
| 21 | vi. 350 mm dia PN 1.6 |
| 22 | vii. 400 mm dia PN 1.6 |
| 23 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:- i. Using M.S. angels 40x40x6 mm for diagonal braces. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
