Renovation Work For Composit Vidyalay, Kotva, Sadar, Azamgarh.
Tender Value
7.15 Lakhs
Estimated cost
Bid Submission
05 Jul 2023
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Azamgarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Work For Composit Vidyalay, Kotva, Sadar, Azamgarh.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling existing plaster including disposal of refuse as directed by the Engineer-in charge within a distance\"of 60 metre (200 ft.) |
| 2 | Racking out joints of brick work in cement or lime , mortar to a depth of 1 cm. (3/8\") including disposal of refuse\"as directed by the, Engineer-in-Charge within a distance of 60m. (200\") |
| 3 | 20mm thic plater in1:2 with water proofinf material |
| 4 | Mild steel or iron work in small size and section such as holding down botls , hold fast, tie rods , grating , grill /Staircase railing etc. ( when not included in an overall rates ) wrought to required shape as necessary for bending etc including supply of steel and its wastage i/c cost of bolts, nuts if required for and welding , grinding and making holes as required for proper completion of work. (S.I.No. 285 AR ) Same above item but for hold fast of door and windowsframes chaukhat. |
| 5 | Supply and fixing of flush door commercial quality conforming to IS 2202 Part I (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges ,bolts lock,handles,springs and other fittings but excluding their supply and including painting with two coat of black japan paint on all iron fittings if necessary .Fittings with necessary screw to be supplied departmentally (30 mm thick shutters)leaf |
| 6 | Fixing of steel or wooden chaukhats in position Door/windows/ventilator chaukhats above 1.5 sqmtr |
| 7 | Providing and fixing aluminium sliding door bolts of size 300x16 mm , ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. |
| 8 | Providing and fixing aluminium tower bolts of size 300x10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.complete. |
| 9 | Providing and fixing aluminium handles of size 100 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 10 | Providing and fixing aluminium hanging floor door Twin rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to requiredcolour and shade, with necessary screws etc.complete. |
| 11 | 12 mm thick plaster with cement mortar 1:4 consisting of 1 part cement and 4 part of approved coarse sand of Minimum thickness not to be less than 10 mm .Including supply of all materials , labour and T&P etc requried for proper complition of the work(SI NO 586 a) |
| 12 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete (ii) Size of Tile 600x600 mm. (DSR 2014 ITEM 11.41.2) |
| 13 | Painting two coat synthetic enamel paint over and including priming coat on new steel or other metal surface upto 10cm width or girth in small articles not exceeding 0.10 sqm area after and including preparationof surface by thoroughly cleaning oil,grease, dirt and other foreign matters and scored by wire brushes,fine steel woool rappers and preparing and knotting including cost of all materials,labours,T&P etc.required for proper completion of the work.(SI NO 641+642) |
| 14 | Same as above item for new wooden surface. |
| 15 | Finishing walls with snowsem |
| 16 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 17 | Providing & fixing with 4.0 mm thick glass panes with putty and glazing clips in steel doors, windows , clerestory windows, all complete for proper complition of the work as per direction of E/I |
| 18 | Electric Work: Wiring point for light in 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable (drawn through existing concealed steel conduit) and 5 Amp.flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. |
| 19 | Wiring point forfan in 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable (drawn through existing concealed steel conduit) and 5 Amp.flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. |
| 20 | Wiring point for plug in 1.5 sq. mm. PVC insulated single core aluminium conductor cable (drawn through existing concealed steel conduit) and 5 Amp. flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/junction box with supply of all material, labour and T&P etc. required for proper completion of the work as directed at site by the Engineer in charge but for plug point with 5 Amp flush type switch and 3 pin socket and earth continuity wire of 1.5 sq. mm. PVC insulated aluminium conductor cable. |
| 21 | Wiring point for exhaust fan with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , 15A piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect including matching colour wash. |
| 22 | Add for light / fan points with modular type switch in place of piano type switch. |
| 23 | Add for plug point with modular switch & socket in place of piano type switch & socket. |
| 24 | Add for HPMV/Exhaust fan point with modular type switch in place of piano type switch. |
| 25 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. Cat-AA |
| 26 | Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly laid in slab alongwith reinforcement before concreting and partly concealed in wall, with one no. 14 SWG copper earth continuity wire etc, complete in all respects including matching colour wash. |
| 27 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect. |
| 28 | Supply & Fixing surface/Flush mounting 4ways V TPN distribution board with additional Doorcomplete in all respect, as directed at site by Engineer in charge. (Legrand make) CAT-B |
| 29 | S&F of 63 Amp. 4 pole MCB(10 KA) C Curve CAT A |
| 30 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve |
| 31 | Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. |
| 32 | Supply and burying earth electrode for lighting conductor of 900mm x 900mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe for watering funnel, 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineerin- charge complete in all respect. |
| 33 | Erection and testing of ceiling fan and regulator etc. excluding supply of down rod, complete in all respect. |
| 34 | Supply and fixing of electronic fan dimmer, 300/400 watt, ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. |
| 35 | Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect. |
| 36 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. |
| 37 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.FOR 70 sq. mm 3-1/2 core |
| 38 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. |
| 39 | As Per Non Schedule ItemSupply of 1200 mm sweep Ceiling Fan Crompton Greaves make |
| 40 | Supply of Exhuast FanHavals/ Crompton Greaves make 300 mmdia |
| 41 | Water Supply & Sanatory:Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrsPVC low level flushing cistern with fittings & brackets 40mm dia C.P. flushpipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required.Same as above but for Eropion type W.C. pan with black plastic seat and lid Make, Cera, Hidustan |
| 42 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern includingcutting & making good the walls wherever required. a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. |
| 43 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. a) 32mm dia |
| 44 | Providing & fixing soil, waste and vent pipes.a) 100mm dia centrifugally SWR pipe. |
| 45 | Providing & fixing soil, waste and vent pipes.b)75mm dia centrifugally SWR pipe. |
| 46 | Providing & fixing Upvc SWR Nhani trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. 110mm inlet & 75mm outlet. |
| 47 | Providing and fixing plain SWR bend.a) 110mm |
| 48 | Providing and fixing plain SWR bend.b) 75mm |
| 49 | Providing and fixing centrifugaly UPVC SWR single equal plain junction of required degree.a) 110x110x110mm |
| 50 | Providing and fixing centrifugaly UPVC SWR single equal plain junction of required degree.b) 75x75x75mm |
| 51 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. 110mm diameter |
| 52 | Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc.(internal work)a) 15mm dia nominal bore (medium duty) |
| 53 | Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc.(internal work)b) 20mm dia nominal bore (medium duty) |
| 54 | Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc.(internal work)c) 25mm dia nominal bore (medium duty) |
| 55 | Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc.(internal work)d) 32mm dia nominal bore (medium duty) |
| 56 | Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall.Exposed on walla) 20mm dia nominal bore (medium duty) |
| 57 | Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall.Exposed on wallb) 25mm dia nominal bore (medium duty) |
| 58 | Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall.Exposed on wallc) 32mm dia nominal bore (medium duty) |
| 59 | Providing & fixing cpvc long body bib cock of approved quality conforming to IS standards15mm nominal bore |
| 60 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 61 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular Tank AS per required size of tank atsite |
| 62 | Construction of brick masonary road gully chamber 455x610x45 cms. With bricks of class 150 designation. |
| 63 | Supply and fixing of UPVC S.W.R. pipe type B confirming to IS 13592 includimg jointing the pipeswith rubber ring ,lubricant and UPVC SWR couplar confirming ti IS 14735. Also including excavation of trenches cutting iof walls and holes and repairing walls,floors anf refilling the trenches as before but excluding supply and cost of other fittings such as elbow,bend,tee and Y tee ncluding suplly of all material labour and T&P Required for proper completion of workPipes 160 MM DIA |
| 64 | Supply and fixing of UPVC S.W.R. pipe type B confirming to IS 13592 includimg jointing the pipeswith rubber ring ,lubricant and UPVC SWR couplar confirming ti IS 14735. Also including excavation of trenches cutting iof walls and holes and repairing walls,floors anf refilling the trenches as before but excluding supply and cost of other fittings such as elbow,bend,tee and Y tee ncluding suplly of all material labour and T&P Required for proper completion of workPipes 110 MM DIA |
| 65 | Providing and laying ceent concrete 1:5:10 (1cement 5 c sand 10 graded stone aggregate 40 mm) all round swr pipes including bed cocretePipes 160 MM DIA |
| 66 | Providing and laying ceent concrete 1:5:10 (1cement 5 c sand 10 graded stone aggregate 40 mm) all round swr pipes including bed cocretePipes 110 MM DIA |
| 67 | Construction of brick masonary road gully chamber 600x850x45 cms. With bricks of class 150 designation. |
| 68 | Wall paintingfor educational for children |
AI Tender Summary
Tender Timeline
Jun 26, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 05, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender