Providing Electrical Installation To Block Public Health Unit (Tho Office) At.1) Deoni Tq.Deoni 2) Jalkot Tq.Jalkot 3) Udgir Tq.Udgirdist.Latur
Tender Value
8.60 Lakhs
Estimated cost
Bid Submission
03 Jul 2023
0 days left
EMD
8601
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
deoni → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Electrical Installation To Block Public Health Unit ( Tho Office ) At.1 ) Deoni Tq.Deoni 2 ) Jalkot Tq.Jalkot 3 ) Udgir Tq.Udgirdist.Latur
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25mm with accessories on wall/ceiling as per specification No: WG-MA/CON.(1.2.7) |
| 2 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVCinsulated wire laid in provided conduit/trunking/inside pole/Bus bars or anyother places. as per specification No: WG-MA/BW( 1.3.2) |
| 3 | Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVCinsulated wire laid in provided conduit/trunking/inside pole/Bus bars or anyother places. as per specification No: WG-MA/BW( 1.3.2) |
| 4 | Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulatedwire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW( 1.3.3) |
| 5 | Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulatedwire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW ( 1.3.3 +Note No.3)) |
| 6 | Supplying and erecting modular type switch 6A / 10A duly erected on providedplate and box with wiring connections complete.(1.6.1) |
| 7 | Supplying and erecting modular type switch 16A duly erected on provided plateand box with wiring connections complete.(1.6.2) |
| 8 | Supplying and erecting modular type 3 pin 6A multi socket with safetyshutter, duly erected on provided plate and box with wiring connectionscomplete.(1.6.10) |
| 9 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safetyshutter, duly erected on provided plate and box with wiring connectionscomplete..(1.6.11) |
| 10 | Supplying and erecting modular type (two module) electronic step regulatorfor fan, duly erected on provided plate and box with wiring connections complete.(1.6.23) |
| 11 | Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box.(1.6.24) |
| 12 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 6module duly erected.(1.6.30) |
| 13 | Supplying and erecting PVC Surface modular switch box with doublemounting plate for 12 module duly erected..(16.32) |
| 14 | Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG PW/CW (1.7.26) |
| 15 | Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW ( 1.7.19 ) |
| 16 | Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW1.7.20 |
| 17 | Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.( 2.8.11) |
| 18 | Supplying and erecting luminous / modular type call bell indicator withplastic body, heavy duty coil and indicator lamp working on 230V A.C. supplywith resetting arrangement complete erected on double wooden/ sunmica board..(2.3.14) |
| 19 | Supplying and erecting ding dong / electronic musical type call bell withheavy duty coil suitable to operate on 230V A.C. supply erected on polisheddouble wooden block/sunmica block of suitable size. ( 2.3.13 ) |
| 20 | Supplying and erecting bulk head LED fitting max. 10W with high transitivitydiffuser with system lumens output of min. 1100 lumens, min. efficacy of 110lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f.>0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life classof 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVCBlock / wooden board with 3 years warranty. ( 2.1.15 ) |
| 21 | Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt,CRI>80, CCT of 6500K and THD<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty..(CSR No. 2-1-22) |
| 22 | Supplying anderectingFan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.(2.11.4 ) |
| 23 | Supplying and erecting ‘B’ grade G.I.pipe/M.S. pipe down rod duly painted for fan completeerectedwithPVCtwocore flexible cable 24/0.2 mm copper PVC wire. (2.11.6 ) |
| 24 | Supplying and erecting fresh air cum Exhaust fan of light duty250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wiremesh, duly erected in an approved manner and marking Sr. No. And date of erection.( 2.10.14 ) |
| 25 | Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF ( 2.10.21 ) |
| 26 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as perspecification no. SW-SWR/MCB ( 5.3.2 ) |
| 27 | Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as perspecification no. SW-SWR/MCB ( 5.3.3 ) |
| 28 | Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as perspecification no. SW-SWR/MCB (5.3.7) |
| 29 | Supplying and erecting single pole and neutral distribution board (SPNDB),with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron /GI frame as per specification no. SW-SWR/MCBDB( 5.4.9 ) |
| 30 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL7-1-6 |
| 31 | Supplying andlaying (including excavation of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(DWC) ofHDPE for enclosing cable below ground/road surface, to required depth complete..(CSR No.7-6-9) |
| 32 | Providing earthing with Galvanised cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification No. EA-EP ( 9.1.1) |
| 33 | Providingpipetype earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results as per specification no. EA-EP(CSR No. 9-1-4) |
| 34 | Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg.capacity cartridge type conform to IS 2878 /15683 complete erected withnecessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wallcomplete ( 13.15.1 ) |
| 35 | Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB(CSR No. 2-7-4) |
| 36 | Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2.(CSR No. 2-4-4) |
| 37 | Add GST 18% |
AI Tender Summary
Tender Timeline
Jun 26, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender