}

Tender For Repair And Periodic Maintenance Works At Various Spots Of Mhs 400 Kw Hunder And 100Kw Sumoor Power Project From Headwork To Tailrace Channel, Nubra, Ladakh-Jammu And Kashmir

Power Development Department has published Tender For Repair And Periodic Maintenance Works At Various Spots Of Mhs 400 Kw Hunder And 100Kw Sumoor Power Project From Headwork To Tailrace Channel, Nubra. Submission Date for this Tender is 06-07-2023. Electrical Maintenance Tenders in Ladakh Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

38360516
Tender For Repair And Periodic Maintenance Works At Various Spots Of Mhs 400 Kw Hunder And 100Kw Sumoor Power Project From Headwork To Tailrace Channel, Nubra
Open Tender
Indian
Jammu And Kashmir
Ladakh
06-07-2023

Tender Details

Repair And Periodic Maintenance Works At Various Spots Of Mhs 400 Kw Hunder And 100Kw Sumoor Power Project From Headwork To Tailrace Channel, Nubra

Key Value

Document Fees
INR 500 /-
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: Repair and periodic maintenance works at various spots of 400kW Hunder and 100kW Sumoor Power Project from headwork to tailrace channel, Leh
Sl. No. Item Description
1Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. a) All kinds of soils
2b) Ordinary rock
3c) Hard Rock ( requiring blasting)
4d) Hard Rock (Blasting prohibited)
5Earth work in excavation by manual means over areas (exceeding 30 cm and 1.5mtr in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. a) All kinds of soils
6b) Ordinary rock
7c) Hard Rock ( requiring blasting)
8d) Hard Rock (Blasting prohibited)
9Earth work in excavation by mechanical means (hydraulic excavator) over areas exceeding 30 cm in depth and 1.5 m in width as well as10 sqm on plan) including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soils. a) All kinds of soils
10b) Ordinary rock
11c) Hard Rock ( requiring blasting)
12d) Hard Rock (Blasting prohibited)
13Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:a) All kinds of soils
14b) Ordinary rock
15c) Hard Rock ( requiring blasting)
16d) Hard Rock (Blasting prohibited)
17Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
18Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively ) a) Dry
19b) Wet
20c) Shingle clerance from canals
21Slip clerance in soils, mixed with moorum, kankar/shingle/boulders disposal lead upto 50m and lift upto 1.5m
22Hand-packing stones in wire-crates; excluding cost of stones and wire crate
23Soling stone supply for packing in wire crates
24Grouting of stone pitching using M10 nominal mic concrete (max size of aggregate, 20mm nominal @ 6.00 cum per 100 sq m on horizontal/side slopes, complete including curing (Nallah)
25Opening out old wire crates those and re-binding after filling
26Filling empty cement bags with sand/ earth; including cost of sewing and strings; excluding cost of bags and earth / sand
27Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) Crushed
281:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Crushed
291:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Crushed
301:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) Crushed
31Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills,fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) Crushed
321:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Crushed
331:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Crushed
34Providing and laying upto floor v level reinforced cement concrete in kerbs, steps and the like including curing but excluding the cost of centering, shuttering, finishing an reinforcement with. a ) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
35Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-mechanically treated bars
36Centering and shuttering including strutting, propping etc. and removal of form work for: a) Foundations, footings, bases for columns etc for mass concrete
37b) Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.
38c) Columns, piers, abutments, pillars, posts and struts
39Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer incharge: a) 1:3:6 or richer mix
40b) 1:4:8 or leaner mix
41Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.
42Demolishing R.B work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.
43Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: in cement mortar
44Providing and laying cement concrete in kerbs, steps and the like at or near ground level including curing, excluding the cost of centring, shuttering, and finishing. a) 1:1½:3(1 cement :1½ coarse sand :3 graded stone aggregate 20 mm nominal size)
45b) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
46Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete a) 1:1½:3(1 cement :1½ coarse sand :3 graded stone aggregate 20 mm nominal size)
47b) 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size)
48c) 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)
49Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete
50Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: a) Cement mortar 1:6 (1 Cement : 6 coarse sand)
51Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand)
52Dry random rubble masonry with hard stone in foundation and plinth: a) With bond stone
53Without bond stone
54Rates for external plaster are for height upto 10m from ground level unless otherwise stated. CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: a) 1 : 4 ( 1 cement : 4 fine sand)
55b) 1 : 6 ( 1 cement : 6 fine sand)
5615mm Cement plaster on the rough side of single or half brick wall of mix.a) 1 : 4 ( 1 cement : 4 fine sand)
57b) 1 : 6 ( 1 cement : 6 fine sand)
5820mm Cement plaster of mix: a) 1 : 4 ( 1 cement : 4 fine sand)
591 : 6 ( 1 cement : 6 fine sand)
60CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
611 : 6 ( 1 cement : 6 fine sand)
6215mm Cement plaster on the rough side of single or half brick wall of mix 1 : 4 ( 1 cement : 4 fine sand)
631 : 6 ( 1 cement : 6 fine sand)
6420mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
651 : 6 ( 1 cement : 6 fine sand)
66Cement plaster 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement a) 12 mm cement plaster
67b) 20 mm cement plaster
6815mm Cement plaster 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall
69Providing and laying in-situ concrete lining using M-10 nominal mix concrete (max. size of aggregates: 20mm nominal) a) In beds
70b) In side slopes, - upto a height of 3.5 m above bed
71c) In side slopes, - at a height over 3.5 m but upto 5.5m above bed
72d) In side slopes, at heights over 5.5 m but upto 7.5 m above bed
73Costs of supply of wire crates LMR
74Carriage of material from sources to site of work by MT for 2 Kma) cement/steel
75b) Sand, Aggregate below 40mm
76c) Crates, Soling stone, bricks
77Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. WELDED 10 MCP75
78Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. WELDED A50x50x6
79Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. including carriage
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail