Military Engineer Services-MES has published Tender For Repair/Repainting Of Steel Furniture ,Re-Canning, Polishing Of Wooden Funriture At Unit Lines, Married Accn And Funriture Under Ge 869 Ews At Leimakhong Mil Stn.. Submission Date for this Tender is 28-07-2023. Steel Furniture Tenders in leimakhong Manipur. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 10-Jul-2023 | CORRIGENDUM1 | Date | 21-07-2023 |
2 | 12-Jul-2023 | BOQCORRIGENDUM | BOQ | 21-07-2023 |
3 | 12-Jul-2023 | BOQCORRIGENDUM | BOQ | 21-07-2023 |
4 | 21-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-07-2023 |
5 | 26-Jul-2023 | CORRIGENDUM3 | Other | 28-07-2023 |
Sl. No. | Item Description |
1 | Schedule "A" |
2 | Removing the existing unserviceable tops from the following tables and supply and fix new top of18/19 mm thick commercial block board with 1 mm thickplastic laminated sheet fixed on top4 mm thick teak wood edging shall be provided al-round the top.all as shown on drawing and specified .(1.01) Table 3"x 2" with drawers steel/WdnFD-1008 & FD-283 |
3 | (1.02) Table 3"x 2" without drawerssteel/Wdn FD-1007 & FD-224 |
4 | (1.03) Table Centre FD-235 |
5 | (1.04)Table pegFD-227 |
6 | (1.05)TeapoyFD - 278 |
7 | (1.06)Table dining 6 PersonsFD - 239 & FD/MAP/03 |
8 | (1.07)Table dining 8 PersonsFD-273 |
9 | (1.08)Table Writing FD-275 |
10 | (1.09) Table Office clerk steel FD-1004 |
11 | (1.10) Table office Officer steelFD-1003 |
12 | (1.11) Teapoy Verandah FD-255 |
13 | (1.11) Table 900 mm x 600 mm with drawer steelFD-1008 |
14 | (1.12) Table 900 mm x 600 mm without drawer steelFD-1007 |
15 | (1.13) Table 900 mm x 900 mm steelFD-1009 |
16 | Removing the existing unserviceable front and back long rail from the following tables and supply and fix newfront and back long railof teak wood/Hollock/Bonsum size, shape & design as shown on drg All new surfaces shall be two coatof french polish with high gloss finish. (15.01) Table 3"x 2" with drawers FD-283 |
17 | (15.02) Table 3"x 2" without drawersFD-224 |
18 | (15.02) Table Centre FD-235 |
19 | (15.03) Table pegFD-277 |
20 | (15.04) Teapoy FD-278 |
21 | (15.05) Table dining 6 PersonsFD-239 |
22 | (15.06) Table dining 8 PersonsFD-273 |
23 | (15.07) Table Writing FD-275 |
24 | Ditto all as per item No 15.00 here-in- above but short side rail. (23.01) Table 3"x 2" with drawers FD-283 |
25 | (23.02) Table 3"x 2" without drawers FD-224 |
26 | (23.03) Table Centre FD-235 |
27 | (23.04) Table pegFD-277 |
28 | (23.05) Teapoy FDFD-278 |
29 | (23.06) Table dining 6 PersonsFD-239 |
30 | (23.07) Table dining 8 Persons FD-273 |
31 | (23.08) Table Writing FDFD-275 |
32 | Ditto all as per item No 15.00 here-in- above but Legs.(31.01)Table 3"x 2" with drawersFD-283 |
33 | (31.02) Table 3"x 2" without drawers FD-224 |
34 | (31.03) Table Centre FD-235 |
35 | (31.03) Table pegFD-277 |
36 | (31.04) Teapoy FD FD-278 |
37 | (31.05) Table dining 6 PersonsFD-239 |
38 | (31.06) Table dining 8 PersonsFD-273 |
39 | (31.07) Table Writing FD FD-275 |
40 | Removing the existing unserviceable front leg from following chair and S&F new teak wood front leg complete all as directed and shown on drgChair dining FDFD-279 |
41 | All as per Ser No 39.00 but Chair dining MAP FD/MAP-II/05 |
42 | All as per Ser No 39.00 but Chair Dining Officers (MAP) FD/MAP-II/04 |
43 | All as per Ser No 39.00 but Chair dining long BackFD-357 |
44 | All as per Ser No 39.00 but Chair WritingFD-280 |
45 | All as per Ser No 39.00 but Chair EasyFD-229 |
46 | Removing the existing unserviceable rear leg from following chair and S&F new teak wood rear leg complete all as directed and shown on drgChair diningFD-279 |
47 | All as per Ser No 47.00 but Chair dining MAP FD/MAP-II/05 |
48 | All as per Ser No 47.00 but Chair Dining Officers (MAP) FD/MAP-II/04 |
49 | All as per Ser No 47.00 but Chair dining long BackFD-357 |
50 | All as per Ser No 47.00 but Chair WritingFD-280 |
51 | All as per Ser No 47.00 but Chair Easy FD-229 |
52 | Removing the existing unserviceable front rails from following chair and S&F new teak wood front rails complete all as directed and shown on drg Chair diningFD-279 |
53 | All as per Ser No 53.00 but Chair dining MAP FD/MAP-II/05 |
54 | All as per Ser No 53.00 but Chair Dining Officers (MAP) FD/MAP-II/04 |
55 | All as per Ser No 53.00 but Chair dining long BackFD-357 |
56 | All as per Ser No 53.00 but Chair Writing FDFD-280 |
57 | All as per Ser No 53.00 but Chair Easy FDFD-229 |
58 | Removing the existing unserviceable side rails from following chair and S&F new teak wood side rails complete all as directed and shown on drg Chair dining FD-279 |
59 | All as per Ser No 59.00 but Chair dining MAP FD/MAP-II/05 |
60 | All as per Ser No 59.00 but Chair Dining Officers (MAP) FD/MAP-II/04 |
61 | All as per Ser No 59.00 but Chair dining long Back FD-357 |
62 | All as per Ser No 59.00 but Chair Writing FD-280 |
63 | All as per Ser No 59.00 but Chair EasyFD-229 |
64 | SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of "cool" foam of 32 density 530 mm x500 mm covered with best quality of tapestry clothMake - Sleepwell/Kurlonall as shown on drgs and as approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth shouldnot be less than Rs.350/Mtr |
65 | SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02Removing the existing unserviceable leg from Sofa and S & F new teak wood/Hollock/Bonsum leg all as shown on drg and directed by Engr- in -Charge. |
66 | SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02Removing existing unserviceable Arm restfrom Sofa and S & F new teak wood/Hollock/BonsumArm Rest all as shown on drawing and specified . |
67 | SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02Removing existing unserviceable side railfrom Sofa and S & F new teak wood/Hollock/Bonsum side rail all as shown on drawing and specified . |
68 | SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing existing unserviceable bearerfrom Sofa long pieces and S & F new teak wood/Hollock/Bonsum bearerall as shown on drawing and specified . |
69 | SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing existing unserviceable bearerfrom Sofa single piecesand S & F new teak wood/Hollock/Bonsum bearerall as shown on drawing and specified . |
70 | SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing existing unserviceable battensfrom Sofa and S & F new teak wood/Hollock/Bonsum battens all as shown on drawing and specified . |
71 | SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02Removing existing unserviceable front railfrom Sofa long piecesand S & F new teak wood/Hollock/Bonsum front railall as shown on drawing and specified . |
72 | SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02Removing existing unserviceable front rail from Sofa single piecesand S & F new teak wood/Hollock/Bonsum front rail all as shown on drawing and specified . |
73 | TABLE DRESSING WITH MIRROR GENTS.FD-230 Removing the existing unserviceable mirror and S & F new mirror 5 mm thick make modiguard /swastic/saint gobain with back and frame all as specified and shown on drgs including with teak wood support approved quality and shown on dragsincluding with teak wood support.` |
74 | TABLE DRESSING WITH MIRROR LADIES FD-251Removing the existing broken glass shutters and S&F new Glass shutters all as shown on drg (Each glass shutter shall be measured as single unit) |
75 | TABLE DRESSING WITH MIRROR LADIES FD-251 Removing the existing unserviceable Aluminium channel and S & F newAluminium Channel all as shown on drgs |
76 | TABLE DRESSING WITH MIRROR LADIES FD-251 Removing existing unserviceable plywood portion of back of Mirror and S&F new back made out of 6 mm thick plywood for mirror all as shown on drgs |
77 | TABLE DRESSING WITH MIRROR LADIESFD-251Removing the existing unserviceable mirror and S&F new mirror5 mm thick ofmake modiguard/Saint Gobain with complete frame and back all as shown on drgs . |
78 | TABLE DRESSING WITH MIRROR LADIES FD-251Removing the existing unserviceable 12mm ply wood from back and S&F new back of table dressing ladies made out of 12 mm thick plywood commercial quality all as shown on drgs and specified. |
79 | Preparing the wood surface by scraping and filling bore holes with putty and rubbing by sand paper/Abbrassive cloth throughly smooth and clean off and applying one coat of french polish of the required finishing :- (82.01) Table 900x600 with Drawer FD-283 |
80 | (82.02) Table Dressing Gents FD-230 |
81 | (82.03) Table Dressing Ladies FD-251 |
82 | (82.04) Bed plywood topFD-246 |
83 | (82.05) Chair diningFD-279 |
84 | (82.06) Chair diningMap FD/MAP-II/05 |
85 | (82.07) Chair Easy FDFD-229 |
86 | (82.08) Chair writingFD-280 |
87 | (82.09) Peg tableFD-277 |
88 | (82.10) Sofa Set 5 SeaterFD-281 |
89 | (82.11) Sofa Set 5 Seater FD/E6/MAP-II/02 |
90 | (82.12) Stool DressingFD-252 |
91 | (82.13) Table 900x600 W/O Drawer FD-224 |
92 | (82.14) Table CentreFD-235 |
93 | (82.15) Table dining 6 personsFD-239 |
94 | (82.16) Table dining 8 personsFD-273 |
95 | (82.17) Table office clk wooden DB-4100 |
96 | (82.18) Table office officer wooden WDF-34 |
97 | (82.19) Table writing FD-275 |
98 | (82.20) Teapoy FD-278 |
99 | Removing the existing unserviceable cane from Chairs and recanning of chairs of all sorts i.e. chair dining, chair writing, chair easy, chair CBA wooden with arms, chair Bin soiled Linen large/small and Stool dressing etc, with best quality of plastic cane Make -Maharashtra/ Swastik Industries of approved make. The plastic cane should be 1.80mm x 0.46 mm for weaving and 3 x 0.60 mm for beading as per Godrej pattern as specified and directed by Engr-in-charge (102.01) Chair Dining FD-279 |
100 | (102.02) Chair writingFD-280 |
101 | (102.03) Chair easy FD-229 |
102 | (102.04) Stool DressingFD-252 |
103 | LOCKER STEELFD-1029 M&L for cleaning/preparing the existing surfaces ie. de-rusting, filling putty, denting of lockers steel including inner and outer surfaces and applying two coats of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish all as directed. |
104 | LOCKER STEELFD-1029 Removing the existing unserviceable/damage/ broken legs for lockers steel and S&F with a new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and all as specified and shown on drgs in addition to provide rubber pad in 3mm thick to be provided for legs. |
105 | LOCKER STEELFD-1029Removing the existing unserviceable/damaged shelves for locker steel and S&F MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker/clips and all as specified and shown on drg. |
106 | LOCKER STEELFD-1029 Removing the existing unserviceable/damaged heps and staple for locker steel and S&F with a new heps and staple all as approved by Garrison Engineer. |
107 | FD/MAP-II/05 Removing the unserviceable PVC seat from Chair Dining (MAP) and supply and fix newsuprior quality PVC seat. All as shown on drg and as directed by Engr-in-Charge. |
108 | FD/MAP-II/05Supply & Fixing 1st class hardwood stiffner of size 360 x 30 x25mm in middle of the seatframe fixed appropriately with 04 Nos bamboo pins with both side rail of chair dining all as specified and directed by Engr-in-Charge. |
109 | ALMIRAH LARGE/MEDIUM STEEL.FD-1032 FD-1031 Removing the existing unserviceable three way locking device and S&Fthree way locking device with cover all as directed by the Engr in Charge and shown on drgs for almirah large steel |
110 | All as per item No 112.01 herein before but almirah medium /small steel |
111 | FD-1031, FD-1032 Removing the existing unserviceable locks and S&F locks of appropriate size 6 levers with duplicate keys chromium plated Make Godrej (product No 3936) or equivalent as suitable in almirah with suitable fixing arrangement all as directed by Engr in Charge and shown on drgs for almirah large/medium steel. Notes :(i)Unit rate quoted shall include for provision/repairs to back plate cover to key hole back side cover locking device etc. (ii) Steel chromium plated handle shall be measured and paid separately. |
112 | FD-1031, FD-1032 Removing the existing unserviceable handle and S&F new chromium plated handle 125mm long to almirah large/medium/small steel all as specified/directed and shown on drg. |
113 | FD-1031 Preparation of old painted steel surfaces ie. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by Garrison Engineer on all external and internal surfaces of almirah large steel as specified and as directed (Size 920 x 485 x 1985mm)by Engr-in-Charge. |
114 | FD-1032All as per item No 116.05 herein before but almirah medium (760 x 440 x 1270 mm). |
115 | FD-1031 Removing the existing unserviceable/damaged/ broken legs for almirah large and S&F with a new legs made out of 18 G sheet with applying one coat of red oxide primer including welding to the almirahs and all as specified and shown on drgs. |
116 | FD-1032Removing the existing unserviceable/damage/broken legs for almirah medium and S&F with a new legs made out of 18 G sheet with applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirahs and all as specified and shown on drgs. |
117 | TABLE OFFICE OFFICER STEEL FD-1002M&L cleaning/preparing the existing surfaces of table office officer steel including inner surfaces of drawers and applying one coat of syntheticenamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish and to fix rubber toe for all legs all as directed. |
118 | TABLE OFFICE OFFICER STEELFD-1002Removing existing unserviceable locks with new one with duplicate keys as existing all as specified and shown on drg. (Make - Godrej or Lico or as approved by GE). |
119 | TABLE OFFICE CLK STEELFD-1004M&L cleaning /preparing the existing surfaces of table office clerks steel including inner surfaces of drawers steel including one coat of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish and to fixHard rubber shoe for legs all as directed. |
120 | TABLE OFFICE CLK STEELFD-1004 Replacement of unserviceable locks with new one with duplicate keys as existing all as specified and shown on drg. (Make - Godrej or Lico or as approved by GE). |
121 | Chair VerandahFD-256Removing the existing unserviceable cane from Chair Verandah and recanning of chair verandah with best quality of Make Maharashtra/Swastik Industries of approved plastic cane 4mm wide as per trade pattern all as specified and directed by Engr-in-Charge |
122 | Chair VerandahFD-256Painting to frame of chair verandah with one coat of synthetic enamel paint white colour as specified and shown on drawing and as directed by Engr-in-Charge |
123 | Chair VerandahFD-256 S&F new hard rubber toes of appropriate size suitable to chair verandah all as specified and shown on drawing and as directed by Engr in Charge |
124 | Bed Hard steel OffrsFD/E6/MAP/08 (R)Removing the existing plywood from bed hard steeland preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour as approved by Garrison Engineer on all external and internal surfaces and refix the plywood of under mentioned bed hard steel as specified and as directedby Engr-in-Charge.Note : New plywood rates will be paid seprately |
125 | Bed Hard steel OffrsFD/E6/MAP/08 (R) Supply only new plywood BWR Grade ISI marked of size 1980 mm x 900 mmwith headless MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge |
126 | Charpoy GI Pipe Plywood top FD-220Removing the existing unserviceable plywood from Charpoy GI pipe Plywood top S&F new plywood BWR Grade ISI marked of size 1980 mm x 900 mmrounded edges on four corner fixed with MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge |
127 | Charpoy GI Pipe Plywood top FD-220Removing the unserviceable/broken check nuts from GI charpoy & supply and fix 6mm thick GI Medium grade check nuts suitable for 32mm dia GI pipe all as specified and shown on drawings (Each check nut will be measured as single unit) |
128 | Charpoy GI Pipe Plywood top FD-220 Removing the unserviceable broken 3 way GI elbow from GI charpoy & S&F 32 MM dia GI medium grade 3 way elbow ISI marked all as specified and shown on drg and directed by Engr-in-Charge (Each Elbow GI shall be measured as single unit) |
129 | Charpoy GI Pipe Plywood top FD-220 Removing the existing unserviceable/broken long rail from GI charpoy and S&F new long rail of GI tubing medium grade 32 mm including cutting, threading and bringing the GI charpoy into the original shape as shown on drawing and directed by Engr-in-charge Make- Jindal/Suryapraksh/Zenith/Appolo |
130 | Charpoy GI Pipe Plywood top FD-220 Making short rails obtained from item No 4 above and fixing all as shown at item No 4 above |
131 | Charpoy GI Pipe Plywood top FD-220 Making legs out of unserviceable long/short rails obtained from item 4 & 5 above including cutting, threading and fixing all as specified and directed |
132 | Charpoy GI Pipe Plywood top FD-220Platewelding-supply and welding 3mm thick 45mm dia MS bottom plate for GI charpoy leg all as shown on drawing and as directed by Engr-in-Charge (each base plate will be measured as single unit). |
133 | Charpoy GI Pipe Plywood top FD-220 Clamp Welding -supply and welding flat Iron 25 mm x 33 mm mild steel clamps made to shape as shonw in drg shall be welded inGI charpoy leg all as shown on drawing and as directed by Engr-in-Charge (each clamp will be measured as single unit). |
134 | "Chair Easy Cushioned FD-358"Taking out old unsv seat from chair easy cushioned and Supply and Fixing new 75mm thick foam cushion of 32 Density shall be fixed on 12mm thick BWR plywood of seat.And new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr-in-Charge shall be provided. Make of foam shall be Kurlon/Sleep well. |
135 | "Chair Easy Cushioned FD-358" Taking out old unsv back rest from chair easy cushioned and supply and fixing new 50mm thick foam cushion of 32 density shall be fixed on 12mm thick BWR plywood of back rest.And new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr-in-Charge shall be provided. Make of foam shall be Kurlons/Sleep well. |
136 | "Chair Easy Cushioned FD-358" Taking out old unsv arms from chair easy cushioned and S&F new arms as per existing size and shape complete all as specified and as directed by Engr-in-Charge. |
137 | "Chair Easy Cushioned FD-358"(139.01) S&F new legs |
138 | "Chair Easy Cushioned FD-358"(139.02) S&F new short & side rails |
139 | "Chair Easy Cushioned FD-358"(139.03) S&F new long rails |
140 | "Chair Easy Cushioned FD-358" (139.04) S&F new short stiffeners |
141 | "Chair Easy Cushioned FD-358" (139.05) S&F new long stifferners |
142 | "Chair Easy Cushioned FD-358" (139.06) S&F new rubber/PVE shoes provided to the bottom of legs |
143 | "Chair Easy Cushioned FD-358" M&L for polishing of two coats of French polish of best quality to the chair easy cushioned after preparation of old surfaces as specified and as directed. |
144 | Chair Writing Steel MAP ( FD/E6/MAP/12 )Removing the existing unserviceable Seat(12 mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam. with PVC lipping all aroundto them in all respect of Make : Godrej or equivalent approx size of seat 510 x 470 x 60) from Chair writing steel MAP and S&F of new Seat all as shown on drg and as directed by Engr-in-Charge. |
145 | Chair Writing Steel MAP ( FD/E6/MAP/12 ) Removing the existing unserviceable Back (12 mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping all aroundto them in all respect of Make : Godrej or equivalent approx size of seat 510 x 470 x 60) from Chair writing steel MAP and S&F of new Back all as shown on drg and as directed by Engr-in-Charge. |
146 | Chair Writing Steel MAP ( FD/E6/MAP/12 ) Plate welding-supply and welding 3mm thick 45mm dia MS bottom plate for Chair writing steel MAP all as shown on drawing and as directed by Engr-in-Charge |
147 | Chair Writing Steel MAP ( FD/E6/MAP/12 )Removing the existing unserviceable Arms from Chair writing steel MAP and S&F of new Arms all as shown on drg and as directed by Engr-in-Charge. |
148 | Charpoy IP hardtopFD/MAP-II/01Removing the existing plywood from charpoy IP hardtop and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour as approved by Garrison Engineer on all external and internal surfaces and refix the plywood of under mentioned bed hard steel as specified and as directedby Engr-in-Charge.Note : New plywood rates will be paid seprately |
149 | Charpoy IP hardtopFD/MAP-II/01 Supply only new plywood BWR Grade ISI marked of size 1980 mm x 900 mmwith headless MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge |
150 | Rack 6 tier steel 915x610x1905 mmM&L for preparation of old painted steel surfaces ie. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by Garrison Engineer by spray process on all external and internal surfacesof rack 6 tier steel to achieve a uniform finish complete all as specified anddirected. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail