Tender For Construction Of Block .Officers.Hut At Ludva In Compartment 42 Rfd Of Rafiabad Range,Langate Forest Division
Tender Value
41.25 Lakhs
Estimated cost
Bid Submission
14 Jul 2023
0 days left
EMD
82514
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rafiabad → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Block .Officers.Hut At Ludva In Compartment 42 Rfd Of Rafiabad Range, Langate Forest Division
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 2 | Providing and laying of dry stone soling packed tightly incl ramming watering and filling of interstices incl all carriages complete job. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) incl all carriage complete job |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement.M20 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (A) Upto plinth level |
| 5 | (B) Beams,suspended floors upto floor V level |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for : (A) Foundation/ Footing U/G |
| 9 | (B) A/G |
| 10 | (C) RCC Slab |
| 11 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 25mm thick with 12.5 mm nominal size stone aggregate. |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and 12 binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.@ 100Kg/cum of RCC 1:1.5:3 |
| 13 | Brick work with F.S.P bricks of class designaion 75 in foundation & plinth, superstructure upto floor V level in cement mortor (1 cement :6 coarse sand). |
| 14 | Dry random rubble masonry with hard stone in foundation and plinth:Without bond stone incl.all carriages completea) Soak Pit |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):9.1.5 First class kail wood 3\"x5\" |
| 16 | Providing & Fixing of paneled or paneled & glazed shutters for doors, windows and clerestory windows including ISI marked black enameled MS butt hinges with necessary screws excluding panelling which will be paid for seperately.(First Class KAIL WOOD 35 mm). |
| 17 | Providing and fixing of Glass Panes4 mm thick glass pane (weighing not less than 10 kg/sqm) |
| 18 | Providing and fixing 35 mm thick wire gauze shutters using galavanised M.S wire gauze of average width for aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors ,windows and clerestory windowsincluding ISI marked bright finished or /and black enamelled M.S butt hinges with necessary screws. [first class kail wood].Quantity vide item 13 only 11.50 sqm |
| 19 | Providing & fixing ISI marked oxidized M.S tower bolts black finish (Barrel Type) with necessary screws etc complete job. 200X10 mm including all carriages of material from approved source up to site of work complete. |
| 20 | Providing & fixing ISI marked oxidized M.S Handles with necessary screws etc complete job. 125 mm including all carriages of material from approved source up to site of work complete. |
| 21 | Providing & fixing ISI marked 85 mm x 42 mm oxidized M S pull bolt lock with necessary screws, nuts, bolts etc including all carriages of material from approved source up to site of work complete. |
| 22 | Providing & fixing oxidized M S casement stays (straight peg type) with necessary screws etc complete job. 250 mm weight not less than 150 gram including all carriages of material from approved source up to site of work complete. |
| 23 | ROOFING Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 24 | Providing high Rib Green Colored G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch inhorizontal/ vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.62 mm thick with zinc coating not less than 275 gram/m2. Area vide item 20. =1024 X1.1= 1126.4sft |
| 25 | Providing ridges or hips of width 60cm overall width Green Colored G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 26 | Providing valleys of 90cm wide overall inGreen Colored G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.1.25 mm thick with zinc coating not less than 350 gram/m2 |
| 27 | Providing & Fixingof 300X40 mm wooden Eaves boarding for truss work. (First Class Kail Wood). |
| 28 | Providing & Fixingof 20 mm thick wooden planks with T & GceilingSoffits. (First Class Kail Wood). |
| 29 | Providing & Fixing of wood work2\"x2\" for frames work for T & G Soffitsto be fixed in vertical/horizantal form. (First Class Budloo Wood). |
| 30 | 12 mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 31 | 15 mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 32 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) includinggrouting the joints with white cement and matching pigments etc. Size of tile 500x500 mm |
| 34 | Providing & fixing ceramic glazed floor tiles 300x300 mm ( thickness to be specificed of ist quality ) of approved make in all colours & shades in cement motor 1:4 mix. |
| 35 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 36 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsGranite of any colour or shade (18mm) |
| 37 | Applying priming coat with ready mixed pink or grey primer of approved brand and manafacture on wood work.(Hard & soft wood).Windows/Doors |
| 38 | Painting with synthetic enamel paint of approved brand and manafacture to give an even shade.(Two or more coats on new work). Wood work.Same as above qty. |
| 39 | Providing & applying white cement based based putty of average thickness 2 mm thickness of approved brand and manafacture over plastered wall surface to prepare the surface even and smooth completly. |
| 40 | Finishing walls with textured exterior paint of required shade on new work (two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofig cement paint applied @ 2.20kg/10sqm.(Exterior finishing). |
| 41 | Distempering with oil bound washable distemper of approved brand and manafacture to give an even shade two or more coats on new work and including priming coat with cement primer. |
| 42 | Providing and fixing of Kitchen Counters cabnits/ almira using teak wood, Wooden Mica(Den-Mica) includingall required standrad accesseries/items complete. |
| 43 | SANITRAY & WATER SUPPLYSanitary work of Standrad & approved quality, (Hindware or equivalent and Jaquar or equivalentIncluding all carriages of material from approved source up to site of work including all required accessories/parts with all fittings complete. Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 44 | Providing and fixing wash basin with C.I. brackets,including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm |
| 45 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drainboard 510x1040x bowl depth 178mm |
| 46 | Providing and fixing of mirror of superior quality with all fittings and fixtures complete. |
| 47 | Cutting holes up to 30x30cm in walls i/c making good the same with common burnt clay FPS non modular bricks |
| 48 | Cutting holes up to 15X15 cm in RCC floors and roofs for passing drain pipes etc. and repairing the hole after insrtion of drain pipe etc. with cement concrete 1:2:4 ,20mm nominal size , i/c finishing complete so as to make it leak proof. |
| 49 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. Thisincludes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good thewall etc.(A)25mm dia |
| 50 | (B) 20mm dia |
| 51 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms Jaquar or equivalent make |
| 52 | Health fucet |
| 53 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make,weighing not less than 1.970 kg.Jaquar or equivalent make |
| 54 | Providing and fixing of Wall Mounted mixer 15mm nominal bore of approved quality and make.Jaquar or equivalent make |
| 55 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia Jaquar or equivalent make |
| 56 | Providing and fixing ball valve (brass) of approved quality,with all fittings and fixtures complete. (A)25 mm dia. nominal bore |
| 57 | (B) 20 mm dia. nominal bore |
| 58 | Providing and fixing gun metal gate value C.I wheel of approved quality (Screwed end )25mm nominal bore |
| 59 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge. |
| 60 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 61 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms. |
| 62 | Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 63 | Providing and fixing of Towel rail of superior quality with all fittings and fixtures complete. |
| 64 | Providing and fixing of Gyser Venus make ISI 50litre Capacity with all necessary fittings. (washroom) |
| 65 | Providing and fixing Polyvinyl Chloride (PVC) pipes,incl all PVC plainfittings This includes jointing of pipes ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. :External work (Class B)Prince or Finolex make) of heavy duty(A) 75 mm nominal dia .Pipes. Vent pipe |
| 66 | (B) 75 mm nominal inner dia .Pipes. |
| 67 | (C)100mm nominal inner dia .Pipes. |
| 68 | Providing and fixing Polyvinyl Chloride (PVC) fittings for pvc pipes (Class B) Prince or Finolex make) of heavy dutyP-Trap |
| 69 | 100mm door tee |
| 70 | 100 mm bend with door |
| 71 | 100 mm bends |
| 72 | 100 mm TEE |
| 73 | 100 mm Connector |
| 74 | 75mm Flow Trap with jali |
| 75 | 75mm Door Tee |
| 76 | 75mm bend with door |
| 77 | 75mm Bend |
| 78 | 75mm Connector |
| 79 | 75mm Tee |
| 80 | Reducer 100mm x 75mm |
| 81 | Vent Cap 75mm |
| 82 | Constructing masonry main holes 60x60x45 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand)with C. I. surface box i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. complete job |
| 83 | Supply, installation, testing and commissioning of following electrical equipment / items as per technical specifications and directions of Engineer-in-Charge as required. The electric fitting shall be concealed type and shall be run upto external face of the wall of the structure near main door. All wiring shall be concealed type & PVC insulated copper flexible wiring as per the specification of IS Code for different circuits of approved make like Havels/Anchor etc with tube lights and false ceiling lights in sufficient Nos. for providing proper visibility in each room . Standard branded companiesas per the IS Specifications in all habitable rooms and Cieling Fans,exhaust fans in toilets etc. of reputed Brands.Lighting points (1.5mm sq. wire). |
| 84 | Lighting Circuits with(2.5mm sq. wire). |
| 85 | Heating Points with SS combine (4mm wire ,15 Amp). |
| 86 | Generator /Inverter fittings Lighting points (1.5mm sq. wire). |
| 87 | Three pin Socket. |
| 88 | Half Indicator Points |
| 89 | Iron D Box of standrad make,18 way. |
| 90 | MCB DP 32- Amp |
| 91 | MCB DP 40- Amp |
| 92 | MCB DP 63- Amp |
| 93 | Service Line (7/16 wire) |
| 94 | Exhuasters |
| 95 | Fan Points with 48 inch Sweep ceiling Fans. |
| 96 | Concelead LED Bulbs. |
| 97 | Changeover Box 63 AMP. |
| 98 | Providing and fixing of Copper Steamer 100 ltrs including all electrical fittings to be covered with brick work on all sides and construction of under hearth for burning of fire-wood including carriage charges, to be done as per direction engineer in charge. |
| 99 | Providing & Fixing up of Window / Glazing / Door curtain in required sizes having the specification as detailed above. The rates shall be inclusive of the cost of the curtain cloth, Lining cloth, stitching, Hanging arrangement and Fixing of the curtain The bracket used for hanging the curtains shall be good quality Stainless Steel Brackets, shall be side mounted or front mounted or ceiling mounted as required at site. Curtain Rods shall be stainless steel pipe -1\" (25 mm) diameter, 22 Gauge with steel grade 304 or higher, Robust structure, Excellent Seamless finish. The end caps shall be of stainless steel. Where curtain is used as a partition/ long length, sufficient support from ceiling should be provided to avoid sagging. All hardware used in the work shall be of good quality. The samples of the brackets, pipe, end caps, eyelets, etc. and other hardware such as ceiling suspenders, fasteners, etc. is to be got approved before using the same in the work. |
| 100 | Providing and fixing of mattingA-Class carpet standard quality including 10mm thick thernocol sheet under floor duly applied by EIC including all carriage complete. |
| 101 | Providing and fixing of superior quality Foreign Wooden Chairs and table including spirit polishing andcarriage complete (A)Table |
| 102 | (B) Chairs |
| 103 | Carriage of different materials By Mechanical Transport including loading, unloading and stacking (A) Bricks avg lead of 120 kms |
| 104 | (B) Sand, stone aggregate below 40 mm nominal size avg lead of 35 kms |
| 105 | Carriage of materials By head load from dumping site upto site of work upto 1 Km(A) Sand and bajri average |
| 106 | (B) Cement and steel |
AI Tender Summary
Tender Timeline
Jun 26, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 15, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender