Military Engineer Services-MES has published Tender For Repair Of Wooden Furniture And Recanning Of Chairs Issued To Otm And Md Accn Under Ge (East) Lucknow. Submission Date for this Tender is 19-07-2023. Wooden Furniture Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-07-2023 |
| Sl. No. | Item Description |
| 1 | BED PLY TOP (FD-246/ 247) S&F12mm thick plywood BWR Grade, approved quality in single piece as per drawing without any joint to the bed frame with suitablescrews wood/steel with cup washer including removal of damaged ply wood all as specified on drawing |
| 2 | S&F in repairs to 1st qualityteak wood long railas per existing size of Bedincluding removal of damaged long rail all as specified on drawing . (Note:- Each long rail will be measured as single unit) |
| 3 | All as per item No. 1.01,but short rail all as specified on drawing.(Note:- Each short rail will be measured as single unit). |
| 4 | S&F in repair to head board consisting of 60 x 30 x 260mm vertical size and 30 x 60 x 400mm horizontal including legs of size 60 x 60mm in section at top and length 400mm from bottom of leg and 30 x 30mm in section at bottom complete including removal of damaged head board all as specified on drawing or as directed. |
| 5 | All as per item No. 1.03 above but foot board consisting of 22 x 75mm in section teak battens 3 Nos at equal space, joining top and bottom horizontal rails of foot board. The top and bottom horizontal rails of size 30 x 60mm shall be 1st quality of teak wood. The vertical legs above horizontal rails shall be 30 x 60mm all as specified on drawing or as directed. |
| 6 | S&F in reapirs to new 1st quality teak wood stiffeners of size 40 x 60mm complete including removal of damaged stiffiners all as specified on drawing or as directed. |
| 7 | S&F in reapirs to 4mm thick one side teak plywood commercial of size 780 x 340mm including 12mm dia half round teak wood beading of both side of head board including removal of damaged ply all as specified on drawing or as directed. |
| 8 | S&F in reapirs to 4mm thick one side teak plywood commercial of size 780 x 180mm including 12mm dia half round teak wood beading of both side of foot board including removal of damaged ply all as specified on drawing or as directed. |
| 9 | S&F in repairs to flat iron of mild steel of size 35mm x 5mm, bents to right angle on each corners of Bed ply top all as specified on drawing or as directed. |
| 10 | Chair dining (FD-228, FD-279 or Similar)Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawingor as directed. |
| 11 | Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawingor as directed. |
| 12 | Removing the existing unserviceable back rest and providing new teak wood back restslightly curvedcomplete all as specified on drawingor as directed. |
| 13 | Removing the existing unserviceable front rail and providing new teak wood front raildrilling holes at 12.5 mm C/C complete all as specified on drawingor as directed. |
| 14 | Removing the existing unserviceable rear railprovidng new teak wood rear rail including drilling holes at 12.5 mm C/C complete all as specified on drawingor as directed. |
| 15 | Removing the existing unserviceable side rails and providing new teak wood side railsincluding drilling holes at 12.5mm C/C complete all as specified on drawingor as directed. |
| 16 | Recaning of chair dining withapproved plastic cane 1.80 x0.46mm and border with 3x0.60mm cane of white or cream ivory all as specified on drawing or as directed. |
| 17 | Chair writing(FD-202, FD-250, FD-280 or similar) Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawingor as directed. |
| 18 | Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawingor as directed. |
| 19 | Removing the existing unserviceable back rest and providing new teak wood back restslightly curvedcomplete all as specified on drawingor as directed. |
| 20 | Removing the existing unserviceable front rail and providing new teak wood front raildrilling holes at 12.5 mm C/C complete all as specified on drawingor as directed. |
| 21 | Removing the existing unserviceable rear railprovidng new teak wood rear rail including drilling holes at 12.5 mm C/C complete all as specified on drawingor as directed. |
| 22 | Removing the existing unserviceable side rails and providing new teak wood side railsincluding drilling holes at 12.5mm C/C complete all as specified on drawingor as directed. |
| 23 | Removing the existing unserviceable broken arm restand providing new teak wood arm rest complete all as specified on drawingor as directed. |
| 24 | Recaning of chair writing with approved plastic cane 1.80 x0.46mm cane and border with 3x0.60mm cane of white or cream/ivory all as specified on drawing all as specified on drawing or as directed. |
| 25 | Chair Easy(FD-203,FD-229 or similar)Removing the existing unserviceable rear leg and providing with new teak wood rear legcomplete all as specified on drawingor as directed. |
| 26 | Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawingor as directed. |
| 27 | Removing the existing unserviceable broken arm rest and providing new teak wood arm restcomplete all as specified on drawingor as directed. |
| 28 | Removing the existing unserviceable front frame and providing new teak wood front frameincluding drilling holes @ 12.5 mm C/C complete all as specified on drawingor as directed. |
| 29 | Removing the existing unserviceable front/back rail and providing new teak wood front railcomplete all as specified on drawingor as directed. |
| 30 | Removing the existing unserviceable side rails and providing new teak wood side rails complete all as specified on drawingor as directed. |
| 31 | Recaning of chair easy seat and back of approved quality white or cream ivory with 1.80 x 0.46 mm cane and border with 3x0.60 mm cane complete all as specified on drawingor as directed. |
| 32 | Common for all chairsRemoving the existing unserviceable stiffeners and providing new stiffners made out of 1st class seasoned teak woodstiffenerscomplete all as specified on drawingor as directed. |
| 33 | Stool Dressing CB(FD-282 or similar)Recaning of Stool dressing with best quality of approved plastic cane half round 2mm wide and 0.4mm thick plastic cane of white or cream ivory all as specified on drawing or as directed. |
| 34 | S&F PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the following furniture items as specified & directed:- Chair Easy, Chair Dining, Chair Writing & Stool Dressing CB. |
| 35 | Book Case (FD-237)Removing the existing unserviceable shutter and providing new shutter made out of 18mm thick particle board exterior grade with 0.6 mm thick laminate in colour/shade as approved and providing teak wood beading all around including Hinges and lock all as specified on drawing all as specified on drawing or as directed. |
| 36 | Removing the existing unserviceable back of book case and providing new Back with 6mm thick plywood commercial type ofall as specified on drawing all as specified on drawing or as directed. |
| 37 | Hat Stand with mirror (FD-233)S&F in repair new mirror5 mm thick for Hat stand with mirror ofapproved make with complete frame back all as specified on drawing or as directed. |
| 38 | Removing of existing unserviceable Back of Hat stand with mirror and providingnew Back of 6mm plywood commercial shall be fixed with headless nail and refixing the old mirror, rest all as shown on drg and as directed. |
| 39 | S&F of brass pegs with screw in place of broken/ lost pegs in hat stand with mirror, rest all as shown on drg and as directed. |
| 40 | Side Board (FD-241,FD-1112) Removing the existing unserviceable top of side board and providing new top made out of 18mm thick prelaminated particle board exterior gradecomplete all as specified on drawing and as directed. |
| 41 | Removing the existing unserviceable sides of side board and providing new sides made out of 18mm thick prelaminated particle board exterior grade all as specified on drawing and as directed. (Note : Each side will be measured as single unit) |
| 42 | Removing he existing unserviceable back of Side Board and providing new Back with 6mm thick plywood commercial type ofall as specified on drawing and as directed. |
| 43 | Removing the existing unserviceable Top drawer and providing New drawer made out of 12 mm thick particle board having ply on both sides.The drawer shall be run on 19 mm x 19 mm thick teak wood batten all as specified on drawing and as directed. |
| 44 | Removing the existing unserviceable Drawers (other than Top drawers) and providing new drawer made out of 12mm thick particle boardhaving ply on both sides.The drawer shall be run on 19mm x 19mm thick teak wood bearer all as specified on drawing and as directed.(Note : Each drawer will be measured as single unit) |
| 45 | Removing the existing unserviceable shutter and providing new shutter made out of 18mm thick particle board exterior grade with 0.6 mm thick laminate in colour/shade as approved including Hinges and lock all as specified on drawing and as directed.(Note : Each shutter will be measured as single unit) |
| 46 | Removing the existing unserviceable bottom of side board and providing new bottom of size 1220 x 455 mm made out of 18mm thick plywood commercial type all as specified on drawing and as directed. |
| 47 | Removing the existing unserviceable leg frame of side board and providing teak wood 2nd class hard wood leg frame all as specified on drawing and as directed. |
| 48 | Removing the existing unserviceable broken legs of side board and providing new teak wood leg 2nd class hard wood of size 45 x 45 x 125 mm but at bottom 25 x 25 mm all as specified on drawing and as directed.(Note : Each leg will be measured as single unit.) |
| 49 | S&F in replacement of unserviceable hinges 75mm long piano type. |
| 50 | S&F in repair locking device of brass 6 lever locks iron body with duplicate keys chromium plated all as specified on drawing and as directed.(Note for item no10.00, 10.01 to 10.10 above :- All parts as mentioned above includes 3mm thick teak wood edging duly polished wherever required as per drawing). |
| 51 | Table dining 8 persons (FD-273) Replacement of existing unserviceable table top for Table dining 8 persons made out of 18 mm thick particle board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed. |
| 52 | S&F in repair to unserviceable damaged legs from Tabledining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 53 | S&F in repair to unserviceable damaged side short rails from Tabledining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 54 | S&F in repair to unserviceable damaged front/back long rails from Tabledining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 55 | Table dining 6 persons (FD-273) Replacement of existing unserviceable table top for Table dining 6 persons made out of 18 mm thick particle board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixedon two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed. |
| 56 | S&F in repair to unserviceable damaged legs from Tabledining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 57 | S&F in repair to unserviceable damaged side short rails from Tabledining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 58 | S&F in repair to unserviceable damaged front/back long rails from Tabledining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 59 | Common for Table dining 8/6 persons S&F in repair teak wood triangular wooden bracket 100X100X20mm thick for all types of tables between leg & stiffners for extra strength all as shown on drg and as directed. |
| 60 | Table without drawer (900x600x760mm) (FD-231,284) Removing of existing unserviceable table top for Table without drawer 900 x 600 x 760mm and providing new table top made out of 18 mm thick particle board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixedon two sides with strong bonded chemical adhesive through hot pressed machine, rest all as shown on drg and as directed. |
| 61 | S&F in repair to unserviceable damaged legs from Table without drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 62 | S&F in repair to unserviceable damaged side short rails from Table without drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 63 | S&F in repair to unserviceable damaged front long rails from Table without drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 64 | S&F in repair to unserviceable damaged bottom stiffners (both short & long) from Table without drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 65 | Table with drawer (900x600x760mm) (FD-224,283) Removing of existing unserviceable table top for Table with drawer 900 x 600 x 760mm and providing new table top made out of 18 mm thick particle board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixedon two sides with strong bonded chemical adhesive through hot pressed machine, rest all as shown on drg and as directed. |
| 66 | S&F in repair to unserviceable damaged legs from Table with drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 67 | S&F in repair to unserviceable damaged side short rails from Table without drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 68 | S&F in repair to unserviceable damaged front long rails from Table with drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 69 | S&F in repair to unserviceable damaged bottom stiffners (both short & long) from Table with drawer 900x600x760mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 70 | S&F in repair to unserviceable damaged drawers from Table with drawer 900x600x760mm made out of first class hard wood (teak) including providing 6mm thk commercial ply to bottom of drawer complete, rest all as shown on drg and as directed. |
| 71 | Table (900mmx 900mm) (FD-291)Removing of existing unserviceable table top for Table 900 x 900mmand providing new table top made out of 18 mm thick particle board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixedon two sides with strong bonded chemical adhesive through hot pressed machine, rest all as shown on drg and as directed. |
| 72 | S&F in repair to unserviceable damaged legs from Table900x900mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 73 | S&F in repairs to unserviceable damaged side short rails from Table900x900mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 74 | S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from Table900x900mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 75 | Table (1200mmx 900mm) (FD-273) Removing of existing unserviceable table top for Table 1200 x 900mmand providing new table top made out of 18 mm thick particle board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixedon two sides with strong bonded chemical adhesive through hot pressed machine, rest all as shown on drg and as directed. |
| 76 | S&F in repair to unserviceable damaged legs from Table1200x900mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 77 | S&F in repair to unserviceable damaged side short rails from Table1200x900mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 78 | S&F in repair to unserviceable damaged front long rails from Table1200x900mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 79 | S&F in repair to unserviceable damaged bottom stiffners (both short & long) from Table1200x900mm made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 80 | Common for all type of tables S&F in repair Triangular wooden bracket 100X100X20mm thick for all types of tables between leg & stiffners for extra strength complete, rest all as shown on drg and as directed. |
| 81 | Teapoy (FD-278, 34, 382)Replacement of existing unserviceable table top for Teapoy made out of 18 mm thick particle board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixedon two sides with strong bonded chemical adhesive through hot pressed machine all as shown on drg and as directed. |
| 82 | S&F in repair to unserviceable damaged legs from Teapoy made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 83 | S&F in repair to unserviceable damaged bottom stiffners (both short & long) from teapoy made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 84 | Table Centre (FD-274 / 235)Replacement of existing unserviceable table top for Table centre made out of 18 mm thick particle board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixedon two sides with strong bonded chemical adhesive through hot pressed machine all as shown on drg and as directed. |
| 85 | S&F in repairs to unserviceable damaged legs from Table centre made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 86 | S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from table centre made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 87 | Table Writing/Medium/Study (FD-33,275) Table top 18 Prelaminated particle board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixedon two sides with strong bonded chemical adhesive through hot pressed machine all as shown on drg and as directed. |
| 88 | Legs as per drg |
| 89 | Foot rest as per drg |
| 90 | Stiffener as per drg |
| 91 | Sides of cabinet with 18mm thick pre-laminated particle board as per drg |
| 92 | 18mm thick prelaminated particle board Cabinet door & drawer along with locking arrangement and handles as per drg and directed |
| 93 | Table Peg (FD-236,FD-277)Replacement of existing unserviceable table top for Table peg made out of 18 mm thick particle board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as shown on drg and as directed. |
| 94 | S&F in repairs to unserviceable damaged legs from Table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 95 | S&F in repairs to unserviceable damaged toprail from table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 96 | S&F in repairs to unserviceable damaged bottomrail from table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed. |
| 97 | Table Bed side Taking out old ply from the back of table bed side and S&F new back ply 6mm thick commercial BWP ISI mark of the same shape and size of the existing table bed side all as specified and directed. |
| 98 | Taking out old unserviceable top of table bed side and S&F new top of particle board 18/19 of required as per existing drawing including 4mm thick teak wood beading all round all as specified and directed. |
| 99 | Opening out old unserviceable shelf and S&F new shelf made out of 12 mm thick ply wood commercial BWP ISImark of sizeand shape including 4mm thick teak wood beading all round all as specified and directed. |
| 100 | Table Dressing Gents with Mirror (FD-230)Replacement of existing unserviceable drawerfor Table dressing gents made out of prelaminated particles board exterior grade 12mm thick one side teak facing and balancing white on the other side and 12x12mm wooden beading around all as shown on drg and as directed. Note-Each drawer should be measured as single unit |
| 101 | S&F in repair new mirror 5mm thick of approved make with full frame all as shown on drg and as directed. |
| 102 | S&F in repair new top made outof 18 mm thick pre laminated particle borad exterior grade of approved make, all as shown on drg and as directed. |
| 103 | Table Dressing Ladies (FD-251)S&F in repair table top of Table dressing ladies with 18 mm thick pre-laminated particle Board exterior grade of approved make, all as shown on drg and as directed. |
| 104 | S&F in repair new Glass shutters of Table dressing ladiesall as shown on drg and as directed. (Note:- Each glass shutter shall be measured as single unit) |
| 105 | Removing the existing unserviceable Aluminium channel and S & Fixed in repairsAluminium Channel all as shown on drg and as directed. |
| 106 | S&F in repair new back suport made out of 6 mm thick plywood for mirror of Table dressing ladies all as shown on drg and as directed. |
| 107 | S&F in repair new mirror5 mm thick for Table dressing ladies ofapproved make with complete frame back all as shown on drg and as directed. |
| 108 | S&F of Knob of aluminium anodized dark brown in shade as approved by GE &in the following furniture items with screws all as specified & as directed. Side board, Table 3"x2" with drawer, Table Writing/Medium/Study, Table dressing gents with mirror & Table dressing ladies with mirror. |
| 109 | M&L preparation of old wood surfaces by scraping/removing old polish completely and rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying Melamyne polish upto glossy finish of Mohigini/Walnut Color irrespective of drawing complete all as shown on drg and as directed for the following furniture articles:- Bed Ply top (FD-246/ 247) |
| 110 | Chair dining (FD-228, FD-279 or Similar) |
| 111 | Chair writing(FD-202, FD-250, FD-280 or similar) |
| 112 | Chair Easy(FD-203,FD-229 or similar) |
| 113 | Stool Dressing CB(FD-282) |
| 114 | Book Case (FD-237) |
| 115 | Bin linen small (FD-244) |
| 116 | Hat Stand with mirror (FD-233) |
| 117 | Side Board (FD-241,FD-1112) |
| 118 | Table dining 6/8 persons(FD-273) |
| 119 | Table without drawer 900x600x760mm (FD-231,284) |
| 120 | Table with drawer 900x600x760mm (FD-224,283) |
| 121 | Table900x900mm (FD-291) |
| 122 | Table1200x900mm (FD-273) |
| 123 | Teapoy (FD-278, 34, 382) |
| 124 | Table centre (FD-274 / 235) |
| 125 | Table writing (FD-33,275) |
| 126 | Peg Table (FD-236,FD-277) |
| 127 | Table bed side |
| 128 | Tabledressing Gents with mirror (FD-230) |
| 129 | Tabledressing Ladies with mirror (FD-251) |
| 130 | S&F energy saving ceiling fan of 1200 mm sweep of 330-370 RPM, 220-240 volts, AC, 50 Hz, ISI marked with five star rating including hanging with the help of fan hook, down rod up to 04 feet and connecting up with provn of 3 core copper flexible cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed.Make : Havells, Model: ES-50 Premium or Usha, Model: Energia Star ISI or Crompton Greaves, Model: Empower 50 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
