Military Engineer Services-MES has published Tender For Repair To Flooring, Plastering And Certain Others Works Of Offrs / Jcos Of Zone A Area At Mil Stn Gaya. Submission Date for this Tender is 22-07-2023. Civil Work Tenders in gaya Bihar. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-07-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | M&L flyash Brick work using old size bricks with sub class "B" bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 4 | M&L Brick workexcept Bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 5 | M & Lbrick work using old size fly ash bricks straight or curved on plan to any radius in half brick thick wallbuilt in cement mortar 1:4 complete. |
| 6 | Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 7 | M&L for rendering 10mmthick in ceiling on brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified and directed. |
| 8 | M&L for rendering 10mm thick internal surfaces on fair faces of brick work or concrete in cm 1:6 as directed by Engr-in-charge. |
| 9 | M&L for rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement. Note:-WPC measured and paid separatly |
| 10 | Supply only liquid water proofing compound ISI marked. |
| 11 | M&L for applying 1 mm thick wall care putty incl preparation of newly plastered wall/ceiling surfaces |
| 12 | M&L for applying one coat of acrylic distemper over a coat of primer incl preparation of newly plastered wall surfaces. |
| 13 | M&L for applying two coat of acrylic distemper over a coat of primer incl preparation of newly plastered wall surfaces. |
| 14 | M&L for applying ONE coat of acrylic distemper over a coat of primer incl preparation of newly plastered surfaces as in ceiling. |
| 15 | M&L for two coats cement base paint over a coat of primerincluding preparation of newly plastered wall surfaces complete |
| 16 | Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level) |
| 17 | M&L for 25 mm thick PCC 1:2:4 (20mm graded ) in levelling course of floor . |
| 18 | M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified and as directed |
| 19 | Dismantling stone slab/ tiles of any description laid beddded & pointed ias specified and directed. |
| 20 | Taking down chowkhats with shutter of size 1.5 sqm & 4 sqm any description or any size & refixing the same after laying tiles |
| 21 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tiles 0.11 to 018 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:4 incl taking down existing tiles complete all as specified and as directed. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) |
| 22 | M & L for vitrified ceramic tiles double charge light shed of 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete. |
| 23 | M & L for coloured glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick rendering in cement mortar 1:4as backing for tiles incl taking down old tiles complete all as specified and as directed. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring/wall tiles) |
| 24 | M & L Machine cut Kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 |
| 25 | S & F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed |
| 26 | M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces. |
| 27 | M & L for TMTbars 8 mm dia & over cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete |
| 28 | M&L RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) in slabs, cantilever or supported on walls and small works like cubes etc. |
| 29 | Dismantling of wall and ceiling boards, any thickness including cover fillets complete. |
| 30 | S & F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre completealong with. S&F in repairs of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system all as specified and directed by the Engineer-in-Charge. Make Everest/Armstrong . |
| 31 | S & F of taper clips, tee, angles and other items for aluminium door complete. |
| 32 | S & F ofrubber gasket for aluminium door glass complete |
| 33 | M & L for 35 mm thickprecast cement concrete 1:2:4 type B-0 as in louvres and jallies (measured solid), including all mouldings and set in cement mortar 1:4 all as specified and directed . |
| 34 | S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws,etc complete all as specified.Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section (iii)The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 35 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane(to be fixed upto four storey of bldgs) |
| 36 | Supply only Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete. |
| 37 | Supply only 3 mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane |
| 38 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete. |
| 39 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed |
| 40 | S&F PVC (SWR) bends ISI marked any radius of 110 mm borewithaccess door complete all as specified and directed. |
| 41 | S&F PVC (SWR) bends ISI marked any radius of 75 mm borewithaccess door complete all as specified and directed. |
| 42 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed |
| 43 | PVC (SWR) vent cowl for 110 mm bore pipe |
| 44 | PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement |
| 45 | S & F of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 46 | S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 47 | S&F in repair 15 mm dia bore pillar taps cast copper alloy, with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered"Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 48 | S&F in repair 15 mm dia stop valves/angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. (Make-Plumber/ Parryware/ Essco) |
| 49 | S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etccomplete as in repair all as specified. Make : Prayag |
| 50 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . |
| 51 | S&F in repair 15 mm dia two way angle valves, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions (Make-SEIKO/Plumber/Parryware/Essco) |
| 52 | S&F in repair 15 mm dia two way bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions (Make-SEIKO/Plumber/Parryware/Essco) |
| 53 | S &F as in repair chromium plated Shower rose 15 mm size, 125mm long with arms (Make-Parryware/Prayag/Essco) |
| 54 | S&Fvitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopperincluding brackets or fixed to walls with anchor fastnersall as specified and directed by Engr-in-charge. (Make:-Parryware/ Hindware /Cera) |
| 55 | S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete. |
| 56 | S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets |
| 57 | S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltrhoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon |
| 58 | S&F brass chromium plated corner self assembly with CP screws etc complete all as spd (Make-Parryware/Prayag/Jaguar) |
| 59 | S&F Tubular towel rail, 20mm dia, D type, 60cm long between flangesallas specified and directed by engineer incharge . |
| 60 | S&Ftubulartowel ring 165mm external dia as specified and directed by engg in charge . |
| 61 | S&F toilet paper holder as specified and directed by engg in charge . |
| 62 | S & F Century PVC boards Starke prime thickness 6 MM with decoravtive century starline laminates gloss colour Wenge brew 80675 G on front & all around the edges of thickness 0.8-1.0mm cut to length of size and shape complete including necessary frame work for wall panelling all as specified and directed by Engr-in-charge. |
| 63 | Taking down Shutter of any description area exc. 1 sqm and not exc . 2 sqmeach |
| 64 | M&Lfor 35mm thicksecond class hardwood glazed and skelton doorshutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete. |
| 65 | M&L for 32 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sidesincluding 5 mm thick edging/beading on exposed to view on sides & top complete. |
| 66 | S&F 125 mm long Stainless steel butt hinges with steel hinge pin etc. |
| 67 | S&F 200mm long aluminium anodised barrel tower bolt and fixed |
| 68 | S&F 150mm long aluminium anodised handle cast type and fixed D Type |
| 69 | S&Falluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified. |
| 70 | S & F galvanised mild steel wire cloth0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete. |
| 71 | Pressed steel framesof size 105x60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed as directed by engr in charge |
| 72 | Pressed steel framesof size 165x60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed as directed by engr in charge |
| 73 | M&L two coat of synthetic enamel paint overnew woodensurfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primerincluding preparation of surfaces complete. |
| 74 | S & F of Statinless steel grade 304 of kitchen plate rack of 750 x 900 mm complete Make Prayag/Nirali |
| 75 | disconnecting pvc storage tank 1000 l capacity and removing all scale and dirt of circulating pipe incl endorsing date of cleaning tank and hoisting if required and refixing in same position all as directed . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
