Military Engineer Services-MES has published Tender For Repair/ Maintenance Of Water Supply,Solar Water Heaters,Pump Motor Sets Including Repairs To Water Pumping Main Lines And Distribution Lines And Connected Items At Lkt And Bhowali At Afs Bhowali. Submission Date for this Tender is 01-08-2023. Solar Heater Tenders in bhowali Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-07-2023 |
| 2 | 20-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-07-2023 |
| 3 | 26-Jul-2023 | corrigendum No 02 | Date | 01-08-2023 |
| Sl. No. | Item Description |
| 1 | Contract Details |
| 2 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation of pole or cable trenches etc and getting out in hard/dense soil complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 5 | Taking up or down GI water tubing and connections of pipe and fittings including material and labour for GI water tubing,medium grade,galvanized laid in trenches all required fittings of the following bore of sizes complete. |
| 6 | (a) GI pipe of 80 mm bore |
| 7 | (b) GI pipe of 50 mm bore |
| 8 | (c ) GI pipe of 25 mm bore |
| 9 | (d) GI pipe of 20 mm bore |
| 10 | Taking out existing damaged / unserviceable Gate valves of following sizes and Supply and fixing Gun Metal Gate Valve with iron wheel head, both ends screwed for iron pipes all as specified and directed of the following bore of sizes (Make : Zolato/Lakshmi/PRATAP |
| 11 | (a) Gate valve 40 mm bore |
| 12 | (b) Gate valve 25 mm bore |
| 13 | (c) Gate valve 20 mm bore |
| 14 | Taking out existing unserviceable/broken/damaged CI sluice valve from its existing position and Supply, installation, commissioning and testing ofsluice valve of cast iron body, class-I, both ends flanged & drilled conforming to IS-14846 (2000), PN – 1.60 with stainless steel spindle including all accessories such as nut-bolts, washers & fibre / rubber gasket as required at site with and including taking out old unserviceable sluice valve complete all as specified and directed. |
| 15 | (a) sluice valve 80 mm bore |
| 16 | (b) sluice valve 50 mm bore |
| 17 | Scrapping out old paint from motor pump of 15/20 HP capacity, coupling guard, mild steel common base frame and painting with two coats of synthetic enamel paint of approved quality and colours as follows complete all as specified and directed: - (a) Motor pump - Grey colour. (b) Coupling guard and motor air grill - Red colour. (c) Common base frame - Black colour. (d) Suction line & delivery line - Blue colour (inside pump house) (e) Writing SM/MES No. - 25 mm high fonts in white colour on motor & pump. |
| 18 | M&L for taking out existing unserviceable/damaged CI non return valve from its existing position and supply and fixing Non return valvecast iron flanged and conforming to latest IS ,with gasket, bolts and nuts full threaded including joints complete for following sizesall as specified and as directed by the Engineer-in-Charge.(Make: Hazra / Upadhyaya/ Bir) |
| 19 | a) 80 mm bore |
| 20 | b) 50 mm bore |
| 21 | M & L for Taking out existing unserviceable sluice valve partsfrom its existing position for re facing , regrinding and re fixing in position with gasket, bolts and nuts full threaded including joints complete for following sizesall as specified and as directed by the Engineer-in-Charge |
| 22 | (a) 80 mm bore |
| 23 | (b) 50 mm bore |
| 24 | Supply and fixing single phase preventer suitable for 15/20 HP motors, AC 415 Volts,50 Hz complete with all electrical connections as specified and as directed Model-VSP2Make- MINILEC or Equivalent |
| 25 | Scrapping out old rusted / painted surfaces from 80 mm / 50 mm bore cast iron or GI delivery / rising main / overflow / wash out pipe(s) of any water reservoir, and applying two coats of synthetic enamel paint (of approved tint) over a coat of red oxide primer to exposed pipe surfaces including cast iron sluice valve(s) (color as directed) complete all as specified and as directed by the Engineer-in-Charge. |
| 26 | Lifting of existing centrifugal Pump 9 stage, water lubricating type of capacity 15/20 HP from the pump house including disconnecting of motor, suction and dischargepipes and all accessories for repairing / overhauling of 20 HP Pump, dismantling of the motor, replacement of worn out spares, overhauling, servicing including necessary machining work viz turning, polishing and re-assembling of pump and motor on completion of repair work and re-fixing the repaired pump with pipes and all accessories including providing necessary electric connection and testing on completion all as directed by the Engineer-in-Charge. (Note: All spare parts shall be measured and paid separately under respective item as ‘Supply only’) |
| 27 | Supply only (in replacement) the following spares suitable for centrifugal Pump of capacity , 20 HP (Make: Kirloskar) : - |
| 28 | (a) Impeller (gun metal) |
| 29 | (b) Bowlbush silicon rubber |
| 30 | (c) Impeller lock |
| 31 | (d) water lubricating pipe with nipples |
| 32 | (e) Bush (Bronze) |
| 33 | Rewinding of electrical motor of 15/20 HP capacity(Make :- Kirloskar) with super enameled copper winding wire of suitable gauge and turn as per existing including insulating materials, heat varnishing and replacement of worn out spares and re fixing in position with pump sets and testing complete all as specified and directed by the Engineer-in-Charge .Note: All spare parts shall be measured and paid separately under respective item as ‘Supply only’. |
| 34 | S&F ball bearing suitable for Driving end for 20/15 HP motor |
| 35 | S&F ball bearing suitable for Non Driving end for 20 HP motor |
| 36 | M&L for repairs to couplings (flanged or spider) to make the pump motor sets trouble free smooth running including replacement of nuts and bolts and rubber pieces etc complete all as directed |
| 37 | Chlorine tablets contained in plastic cylindrical sealed disposable sanitizer refill for disinfection of drinking water with arrangement for controlled release of disinfectant in water,suitable for operation through for recommended dosing system; (a)Replacement Indication-Visual&Weight variation, (b)Water contact orifice design-Sealed when dry,exposed upon im mersion (c)Operation Type-Non contact,Non Inhalatory (d)Cylinder dia;2.5 inches±0.5 inches (e)Cylinder height-Minimum 10 inches±0.5 inches. Model-Stequa 411AE Refill. Make-Declibac Technologies or Equivalent. Note-Use only for centrifugal pumps and sumps Make- Declibac or equivalent as approved by Eng- in- charge. |
| 38 | M & L for lifting of existing submersible Pump motor set along with column pipes of capacity15/20 HP from the existing bore well / pump house including disconnecting of all electrical connections and all accessories for repairing / overhauling, dismantling of the motor, replacement of worn out spares, overhauling, servicing including necessary machining work viz. turning, polishing and re-assembling of pump and motor on completion of repair work and re-fixing the repaired pump with motor and all accessories including providing necessary electric connections and testing on completion of repair work complete all as specified and directed. NOTE: - All spare parts shall be measured and paid separately under respective items of this schedule as ‘Supply only’. |
| 39 | Supply and fixfollowing spares parts of submersible pump set of capacity 15/20 HP complete all as specified: - |
| 40 | (a) Impellers as per sample. |
| 41 | (b) Bowl bush. |
| 42 | (c) Impeller lock. |
| 43 | M & L for rewinding of submersible motor of 15/20 HP capacity with super enamelled copper winding wire of suitable gauge and turn as per existing including insulating materials, heat varnishing and the like complete all as specified and as directed. |
| 44 | S&F in repair cast iron air valve with two air outlets,80 mm dia bore and fixing up in water supply mains complete all as specified and directed |
| 45 | M&L for disconnecting of all electric connections from the voltage stabilizers of any capacity from installations for fault finding and repair the same after replacement of defective spare parts and re-connecting all electrical connections after repairs complete all as specified and directed. NOTE: - All spare parts shall be measured and paid separately under respective items of this schedule as ‘Supply only’. |
| 46 | M&L for rewinding to variac coils of voltage stabilizers of different capacity with existing gauge super enamelled copper wire including warnishing,heating etc |
| 47 | Supply only the following spares for voltage stabilizers |
| 48 | (a) PCB with accessories for 25/50/75/150 KVA stabilizer |
| 49 | (b) synchronised servo motor of 3 kg |
| 50 | (c ) synchronised servo motor of 10 kg |
| 51 | (d) S&F digital voltmeter as per existing pattern 0-500 V AC |
| 52 | (e) S&F digital ammeter 0-100 Amps with CTs |
| 53 | (f) selector switch 4 way |
| 54 | (g) indicator lamps as per existing |
| 55 | Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
