|
| 1 | Atal Chowk |
| 2 | Supply & fixing of 7 mtr GI Octagonal Pole ofapproved make (top dia 70 mm, Bottom dia 130 mmand base plate 12mm thick) having 3 mm thikness withsingle arm bracket 1 Mtr length in 1:2:4 RCCfoundation bolt including the cost of foundation bolts,excavation & back filling and Required T&P completein all respect. |
| 3 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for110 to 130 Watt Confirming to IP 66 above Protection complete in all respect. CAT- AAA |
| 4 | S/Laying of 25 sqmm3- 1/2 core aluminium conductor PVC insulated Armoured served sheated cables 1100 V grade at a depth of 750 mm below ground level complete in all respect as per SOR |
| 5 | S/F of 01 No. 2.5 sqmm 3 Core PVC insulated Copper conductor cable complete in all respects. |
| 6 | Supply and fixing 40 Amp TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. |
| 7 | Supply and burrying of 75 mm Dia 3 Mtrs. Long Electrode casted with maintenance free, conductive concrete, non corrosive mixture ( Ultra low Resistive carbon 0.001 ohm/Mtr) in the ratio of 3:1:1 (marconite : cement : water) on M.S. Rod wiih hole (16 mm diameter X3 Mtrs ) will be vertically installed for earthing with 1 Mtr G.I strip (25 mm X 2.5mm) connected with SS nut bolt. The earth electrode will be installed into the 100 mm pit up to 3000 mm depth. noraml soil will be used as backfill material. Make : As approved in U.P.P.W.D & C.P.R.I. Certified. |
| 8 | Supply and laying of 63 mm dia DWC HDPE Pipe ISI Marked along with all accessories like socket , bend , coupler etc confirming to IS 14930 , Part II Complete with fitting and cutting , jointing etc direct in ground ( 75 cm below ground level ) including Excavation and refilling the trench but exclusing sand Cushioning and protective coverinng etc complete as required |
| 9 | Supply and fixing of25 sqmm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. |
| 10 | S/F of crimping, solderless copper tin electroplated lugs for 2.5 to 4 sqmm cables including taping complete. |
| 11 | S/F of 4 pole Busbar/connector plate suitable for TPN connection complete with nutbolts, washer etc. |
| 12 | Numbering of pole As per direction of Engineer In Charge |
| 13 | Supply & fixing of Radium Strip Red and yellow on pole for night visibility. |
| 14 | supply & fixing sigh board |
| 15 | supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheated undeground cable. As per item no. 503 |
