Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #38324364

Tender For Repair And Maintenance Of Dg Sets And Allied Works At Af Stn Halwara

Issued by Statutory Bodies & Commissions/Committees · halwara, Punjab
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Jul 2023
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
halwara → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Repair And Maintenance Of Dg Sets And Allied Works At Af Stn Halwara

BOQ

Name of Work: REPAIR AND MAINTENANCE OF DG SETS AND ALLIED WORKS AT AF STN HALWARA
Sl. No. Item Description
1General maintenance including servicing of Diesel Engine Genrating set including supply and replacing fuel filters, oil filters, cleaning of diesel tank, including filling fresh oil after drain out old oil by Skilled trademan as per OEM instructions for theDG Set of Capacity 10 KVA to 30 KVA Make Kirloskar/Mohindra / Cummins/Ashok Layland etc
2All as per Srl item No 1.00 but DG Set Capacity 40 KVA to 82.5 KVA Make Kirlosker /Mohindra / Cummins
3All as per Srl item No 1.00 but DG Set Capacity 100/125 KVA Make Kirlosker / Mohindra / Cummins / Ashok Leyland
4All as per Srl item No 1.00 but DG Set DG Set Capacity 160/200 KVA Make Kirlosker/ Mohindra.
5All as per Srl item No 1.00 but DG Set DG Set Capacity 250/320/400 KVA Make Cummins / Ashok Leyland / Mohindra.
6All as per Srl item No 1.00 but DG Set DG Set Capacity 500/630 KVA Make Cummins / Ashok Leyland / Mohindra. Note for Sl item No. 1.00 to 6.00above: Engine oil will issued by department under sch \"B\" and old oil shall be deposited in the E/M store yard.
7Taking out the self starter 12 / 24 Volt ofDG Set Capacity 10 KVA to 30 KVA and shifting to workshop forrewinding of armature including replacement ofunserviceable, bushes & minor parts & reinstalling the same after testing complete as specified.
8All as per Srl item No 7.00 above but for DG Set DG Set Capacity 50 to 82.5 KVA
9All as per Srl item No 7.00 above but for DG Set DG Set Capacity 100/125 KVA
10All as per Srl item No 7.00 above but for DG Set DG Set Capacity 160 to 200 KVA
11All as per Srl item No 7.00 above but for DG Set DG Set Capacity 250/320/400 KVA
12All as per Srl item No 7.00 above but for DG Set DG Set Capacity 500/630 KVA
13Taking out, repairs and servicing of radiator assembly DG Sets 10 KVA to 30 KVAand replacement of minor parts, soldering the leakage spot to maintain water tightness, tinkering to radiator core and make it operational including descaling of tubes with solution and chemicals and compressed air blast,including transportation to workshop and back and re fixing after testing complete and making it leak proof complete all as specified.
14All as per Srl item No 13.00 above but for DG Set DG Set Capacity 50 to 82.5 KVA
15All as per Srl item No 13.00 above but for DG Set DG Set Capacity 100/125 KVA
16All as per Srl item No 13.00 above but for DG Set DG Set Capacity 160 to 200 KVA
17All as per Srl item No 13.00 above but for DG Set DG Set Capacity 250/320/400 KVA
18All as per Srl item No 13.00 above but for DG Set DG Set Capacity 500/630 KVA
19S&F in replacement of air cleaner filter as per existing sample for DG Set Capacity 10 KVA to 30 KVA complete all as specified
20All as per Srl item No 19.00 above but for DG Set DG Set Capacity 50 to 82.5 KVA
21All as per Srl item No 19.00 above but for DG Set DG Set Capacity 100/125 KVA
22All as per Srl item No 19.00 above but for DG Set DG Set Capacity 160 to 200 KVA
23All as per Srl item No 19.00 above but for DG Set DG Set Capacity 250/320/400 KVA
24All as per Srl item No 19.00 above but for DG Set DG Set Capacity 500/630 KVA
25Opening the coupling of DG Set of Capacity 10 KVA to 30 KVA, dismantling the outer cover & taking out the fly wheel assembly and shifting to workshop for repairincluding repairs to fly wheel starter ring by pressing machine/lathe and reinstalling the same after repair to make it fully fuctional complete all as specified.
26All as per Srl item No 25.00 above but for DG Set DG Set Capacity 50 to 82.5 KVA
27All as per Srl item No 25.00 above but for DG Set DG Set Capacity 100/125 KVA
28All as per Srl item No 25.00 above but for DG Set DG Set Capacity 160 to 200 KVA
29All as per Srl item No 25.00 above but for DG Set DG Set Capacity 250/320/400 KVA
30All as per Srl item No 25.00 above but for DG Set DG Set Capacity 500/630 KVA
31Taking down and Repairs/maintenance of FIP of DG set Capacity 10 KVA to 30 KVA including replacement of Plunzers, Governer kit with pin, Nozzles, Head ball guide kit, Head sheet, Rock rod, Rollar bearing, Oil seal, Piston & rings, Piston pin, jain kit and sleeves complete as specified and directed
32All as per Srl item No 31.00 above but for DG Set DG Set Capacity 50 to 82.5 KVA
33All as per Srl item No 31.00 above but for DG Set DG Set Capacity 100/125 KVA
34All as per Srl item No 31.00 above but for DG Set DG Set Capacity 160 to 200 KVA
35All as per Srl item No 31.00 above but for DG Set DG Set Capacity 250/320/400 KVA
36All as per Srl item No 31.00 above but for DG Set DG Set Capacity 500/630 KVA
37Taking down and repairs/maintenance of water pump assembly of DG set capacity 10 KVA to 125 KVA including replacement of unserviceable/defective spare parts with new one complete as specified and directed
38All as per Srl item No 37.00 above but for DG Set DG Set Capacity 160 to 400 KVA.
39All as per Srl item No 37.00 above but for DG Set DG Set Capacity 500 to 630 KVA.
40Supply only distilled water in 5 Ltrs sealed cane for batteries complete all as specified.
41Repairs to DG Set engine of Capacity 10 KVA, 1500 RPM water cooled by dismantling / strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector etc including replacement of worn out spare parts of engine and reassembling of the complete engine as per the manufacturer instruction complete all as directed.Note : Spare parts to be replaced shall be measured and paid separately as suplly only under respective items of this BOQ.
42Transporting to workshop and repairs to crankshaft of 10 KVA DG set carefully by turning, polishing etc including replacement of main bearings and oil seal complete all as directed
43SUPPLY ONLY ITEMS(SL NO 43 TO 54)Cylinder liner with \"O\" ring of 10 KVA DG Set
44Piston assembly complete with piston ring set of 10 KVA DG Set
45Conrod with small end bush and locating pin of 10 KVA DG Set
46Large end bearing pairs (top half and bottom half) of conrod of 10 KVA DG Set
47Valve seat insert (inlet / exhaust) of 10 KVA DG Set
48Valve guide of 10 KVA DG Set
49Valve pair of 10 KVA DG Set
50FIP element of 10 KVA DG Set
51Lub oil pump assembly of 10 KVA DG Set
52Gasket for cylinder head 1.22 mm thick of 10 KVA DG Set
53Set of joints of 10 KVA DG Set
54Set of \"O\" rings of 10 KVA DG Set
55Repairs to DG Set engine of Capacity 20 KVA, 1500 RPM water cooled by dismantling / strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector etc including replacement of wornout spare parts of engine and reassembling of the complete engine as per the manufacturer instruction complete all as directed. Note : Spare parts to be replaced shall be measured and paid separately as supply only under respective items of this BOQ.
56Transporting to workshop and repairs to crankshaft of 20 KVA DG set carefully by turning, polishing etc including replacement of main bearings and oil seal complete all as directed
57SUPPLY ONLY ITEMS(SL NO 57 TO 68)Cylinder liner with \"O\" ring of 20 KVA DG Set
58Piston assembly complete with piston ring set of 20 KVA DG Set
59Conrod with small end bush and locating pin of 20 KVA DG Set
60Large end bearing pairs (top half and bottom half) of conrod of 20 KVA DG Set
61Valve seat insert (inlet / exhaust) of 20 KVA DG Set
62Valve guide of 20 KVA DG Set
63Valve pair of 20 KVA DG Set
64FIP element of 20 KVA DG Set
65Lub oil pump assembly of 20 KVA DG Set
66Gasket for cylinder head 1.22 mm thick of 20 KVA DG Set
67Set of joints of 20 KVA DG Set
68Set of \"O\" rings of 20 KVA DG Set
69Repairs to DG Set engine of Capacity 30 KVA, 1500 RPM water cooled by dismantling / strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector etc including replacement of worn out spare parts of engine and reassembling of the complete engine as per the manufacturer instruction complete all as directed.Note : Spare parts to be replaced shall be measured and paid separately as supply only under respective items of this BOQ
70Transporting to workshop and repairs to crankshaft of 30 KVA DG set carefully by turning, polishing etc including replacement of main bearings and oil seal complete all as directed
71SUPPLY ONLY ITEMS(SL NO 71 TO 82)Cylinder liner with \"O\" ring of 30 KVA DG Set
72Piston assembly complete with piston ring set of 30 KVA DG Set
73Conrod with small end bush and locating pin of 30 KVA DG Set
74Large end bearing pair (top half and bottom half) of conrod of 30 KVA DG Set
75Valve seat insert (inlet / exhaust) of 30 KVA DG Set
76Valve guide of 30 KVA DG Set
77Valve pair of 30 KVA DG Set
78FIP element of 30 KVA DG Set
79Lub oil pump assembly of 30 KVA DG Set
80Gasket for cylinder head 1.22 mm thick of 30 KVA DG Set
81Set of joints of 30 KVA DG Set
82Set of \"O\" rings of 30 KVA DG Set
83Repairs to DG Set engine of Capacity 50 KVA, 1500 RPM water cooled by dismantling / strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector etc including replacement of worn out spare parts of engine and reassembling of the complete engine as per the manufacturer instruction complete all as directed.Note : Spare parts to be replaced shall be measured and paid separately as supply only under respective items of this BOQ
84Transporting to workshop and repairs to crankshaft of 50 KVA DG Set carefully by turning, polishing etc including replacement of main bearings and oil seal complete all as directed
85SUPPLY ONLY ITEMS(SL NO 85 TO 96)Cylinder liner with \"O\" ring of 50 KVA DG Set
86Piston assembly complete with piston ring set of 50 KVA DG Set
87Conrod with small end bush and locating pin of 50 KVA DG Set
88Large end bearing pairs (top half and bottom half) of conrod of 50 KVA DG Set
89Valve seat insert (inlet / exhaust) of 50 KVA DG Set
90Valve guide of 50 KVA DG Set
91Valve pair of 50 KVA DG Set
92FIP element of 50 KVA DG Set
93Lub oil pump assembly of 50 KVA DG Set
94Gasket for cylinder head 1.22 mm thick of 50 KVA DG Set
95Set of jointsof 50 KVA DG Set
96Set of \"O\" rings of 50 KVA DG Set
97Repairs to DG Set engine of Capacity 62.5 KVA, 1500 RPM water cooled by dismantling / strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector etc including replacement of worn out spare parts of engine and reassembling of the complete engine as per the manufacturer instruction complete all as directed.Note : Spare parts to be replaced shall be measured and paid separately as supply only under respective items of this BOQ
98Transporting to workshop and repairs to crankshaft of 62.5 KVA DG Set carefully by turning, polishing etc including replacement of main bearings and oil seal complete all as directed
99SUPPLY ONLY ITEMS(SL NO 99 TO 110)Cylinder liner with \"O\" ring of 62.5 KVA DG Set
100Piston assembly complete with piston ring set of 62.5 KVA DG Set
101Conrod with small end bush and locating pin of 62.5 KVA DG Set
102Large end bearing pairs (top half and bottom half) of conrod of 62.5 KVA DG Set
103Valve seat insert (inlet / exhaust) of 62.5 KVA DG Set
104Valve guide of 62.5 KVA DG Set
105Valve pair of 62.5 KVA DG Set
106FIP element of 62.5 KVA DG Set
107Lub oil pump assembly of 62.5 KVA DG Set
108Gasket for cylinder head 1.22 mm thick of 62.5 KVA DG Set
109Set of jointsof 62.5 KVA DG Set
110Set of \"O\" rings of 62.5 KVA DG Set
111Repairs to DG Set engine of Capacity 82.5 KVA, 1500 RPM water cooled by dismantling / strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector etc including replacement of worn out spare parts of engine and reassembling of the complete engine as per the manufacturer instruction complete all as directed.Note : Spare parts to be replaced shall be measured and paid separately as supply only under respective items of this BOQ
112Transporting to workshop and repairs to crankshaft carefully by turning, polishing etc including replacement of main bearings and oil seal of 82.5 KVA DG Set complete all as directed
113SUPPLY ONLY ITEMS(SL NO 113 TO 124)Cylinder liner with \"O\" ring of 82.5 KVA DG Set
114Piston assembly complete with piston ring set of 82.5 KVA DG Set
115Conrod with small end bush and locating pin of 82.5 KVA DG Set
116Large end bearing pair (top half and bottom half) of conrod of 82.5 KVA DG Set
117Valve seat insert (inlet / exhaust)of 82.5 KVA DG Set
118Valve guide of 82.5 KVA DG Set
119Valve pair of 82.5 KVA DG Set
120FIP element of 82.5 KVA DG Set
121Lub oil pump assembly of 82.5 KVA DG Set
122Gasket for cylinder head 1.22 mm thick of 82.5 KVA DG Set
123Set of joints of 82.5 KVA DG Set
124Set of \"O\" rings of 82.5 KVA DG Set
125Repairs to DG Set engine of Capacity 100 KVA, 1500 RPM water cooled by dismantling / strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector etc including replacement of worn out spare parts of engine and reassembling of the complete engine as per the manufacturer instruction complete all as directed.Note : Spare parts to be replaced shall be measured and paid separately as supply only under respective items of this BOQ
126Transporting to workshop and repairs to crankshaft carefully by turning, polishing etc including replacement of main bearings and oil seal of 100 KVA DG Set complete all as directed
127SUPPLY ONLY ITEMS(SL NO 127 TO 138)Cylinder liner with \"O\" ring of 100 KVA DG Set
128Piston assembly complete with piston ring set of 100 KVA DG Set
129Conrod with small end bush and locating pin of 100 KVA DG Set
130Large end bearing pair (top half and bottom half) of conrod of 100 KVA DG Set
131Valve seat insert (inlet / exhaust)of 100 KVA DG Set
132Valve guide of 100 KVA DG Set
133Valve pair of 100 KVA DG Set
134FIP element of 100 KVA DG Set
135Lub oil pump assembly of 100 KVA DG Set
136Gasket for cylinder head 1.22 mm thick of 100 KVA DG Set
137Set of joints of 100 KVA DG Set
138Set of \"O\" rings of 100 KVA DG Set
139Repairs to DG Set engine of Capacity 125 KVA, 1500 RPM water cooled by dismantling / strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector etc including replacement of worn out spare parts of engine and reassembling of the complete engine as per the manufacturer instruction complete all as directed.Note : Spare parts to be replaced shall be measured and paid separately as supply only under respective items of this BOQ
140Transporting to workshop and repairs to crankshaft carefully by turning, polishing etc including replacement of main bearings and oil seal of 125 KVA DG Set complete all as directed
141SUPPLY ONLY ITEMS(SL NO 141 TO 152)Cylinder liner with \"O\" ring of 125 KVA DG Set
142Piston assembly complete with piston ring set of 125 KVA DG Set
143Conrod with small end bush and locating pin of 125 KVA DG Set
144Large end bearing pair (top half and bottom half) of conrod of 125 KVA DG Set
145Valve seat insert (inlet / exhaust)of 125 KVA DG Set
146Valve guide of 125 KVA DG Set
147Valve pair of 125 KVA DG Set
148FIP element of 125 KVA DG Set
149Lub oil pump assembly of 125 KVA DG Set
150Gasket for cylinder head 1.22 mm thick of 125 KVA DG Set
151Set of joints of 125 KVA DG Set
152Set of \"O\" rings of 125 KVA DG Set
153Repairs to DG Set engine of Capacity 200 KVA & 250 KVA 1500 RPM water cooled by dismantling / strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector etc including replacement of worn out spare parts of engine and reassembling of the complete engine as per the manufacturer instruction complete all as directed.Note : Spare parts to be replaced shall be measured and paid separately as supply only under respective items of this BOQ
154Transporting to workshop and repairs to crankshaft carefully by turning, polishing etc including replacement of main bearings and oil seal of 200 KVA & 250 KVA DG Set complete all as directed
155SUPPLY ONLY ITEMS (SL NO 155 TO 166)Cylinder liner with \"O\" ring of 200 KVA & 250 KVA DG Set
156Piston assembly complete with piston ring set of 200 KVA & 250 KVA DG Set
157Conrod with small end bush and locating pin of 200 KVA & 250 KVA DG Set
158Large end bearing pair (top half and bottom half) of conrod of 200 KVA & 250 KVA DG Set
159Valve seat insert (inlet / exhaust)of 200 KVA & 250 KVA DG Set
160Valve guide of 200 KVA & 250 KVA DG Set
161Valve pair of 200 KVA & 250 KVA DG Set
162FIP element of 200 KVA & 250 KVA DG Set
163Lub oil pump assembly of 200 KVA & 250 KVA DG Set
164Gasket for cylinder head 1.22 mm thick of 200 KVA & 250 KVA DG Set
165Set of joints of 200 KVA & 250 KVA DG Set
166Set of \"O\" rings of 200 KVA & 250 KVA DG Set
167Repairs to DG Set engine of Capacity 320 KVA & 400 KVA 1500 RPM water cooled by dismantling / strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector etc including replacement of worn out spare parts of engine and reassembling of the complete engine as per the manufacturer instruction complete all as directed.Note : Spare parts to be replaced shall be measured and paid separately as supply only under respective items of this BOQ
168Transporting to workshop and repairs to crankshaft carefully by turning, polishing etc including replacement of main bearings and oil seal of 320 KVA & 400 KVA KVA DG Set complete all as directed
169SUPPLY ONLY ITEMS (SL NO 169 TO 180)Cylinder liner with \"O\" ring of 320 KVA & 400 KVA KVA DG Set
170Piston assembly complete with piston ring set of 320 KVA & 400 KVA KVA DG Set
171Conrod with small end bush and locating pin of 320 KVA & 400 KVA KVA DG Set
172Large end bearing pair (top half and bottom half) of conrod of 320 KVA & 400 KVA KVA DG Set
173Valve seat insert (inlet / exhaust)of 320 KVA & 400 KVA KVA DG Set
174Valve guide of 320 KVA & 400 KVA KVA DG Set
175Valve pair of 320 KVA & 400 KVA KVA DG Set
176FIP element of 320 KVA & 400 KVA KVA DG Set
177Lub oil pump assembly of 320 KVA & 400 KVA KVA DG Set
178Gasket for cylinder head 1.22 mm thick of 320 KVA & 400 KVA KVA DG Set
179Set of joints of 320 KVA & 400 KVA KVA DG Set
180Set of \"O\" rings of 320 KVA & 400 KVA KVA DG Set
181Taking out alternator from the DG set of Capacity 10 KVA after disconnecting all electric connections, removing rotor from the starter, decarbonate the rotor slots and including rewinding to CT coils complete with super enamelled copper winding wire of appropriate size, gauge, turnsincluding insulating material, varnishing, drying and replacing rear and front bearing, greasing of alternator, reassembling and refixing with engine and refixing all components of alternator and mounting the same on the existing foundation, aligning the alternator with engine including transportation and testing on load complete as directed
182All as per Sl item No 181 above but DG set of Capacity 20 KVA
183All as per Sl item No 181 above but DG set of Capacity 30 KVA
184All as per Sl item No 181 above but DG set of Capacity 40 to 50 KVA
185All as per Sl item No 181 above but DG set of Capacity 62.5 KVA
186All as per Sl item No 181 above but DG set of Capacity 82.5 KVA
187All as per Sl item No 181 above but DG set of Capacity 100 KVA
188All as per Sl item No 181 above but DG set of Capacity 125 KVA
189All as per Sl item No 181 above but DG set of Capacity 160/180 KVA
190All as per Sl item No 181 above but DG set of Capacity 200 & 250 KVA
191All as per Sl item No 181 above but DG set of Capacity 320 & 400KVA
192All as per Sl item No 181 above but DG set of Capacity 500 & 630KVA
193S&F in replacement turbocharger assembly complete suitable for DG Set Capacity 10 KVA to 50 KVA all as directed
194S&F in replacement turbocharger assembly complete suitable for DG Set Capacity 62.5 KVA to 125 KVA all as directed
195S&F in replacement turbocharger assembly complete suitable for DG Set Capacity 160 KVA to 320 KVA all as directed
196S&F in replacement turbocharger assembly complete suitable for DG Set Capacity 400 KVA to 630 KVA all as directed
197S&F in replacement ofstop solenoid assembly 12 VDC for pump suitable for DG Set Capacity 10 KVA to 50 KVA complete all as directed.
198S&F in replacement ofstop solenoid assembly 12 VDC for pump suitable for DG Set Capacity 62.5 KVA to 125 KVA complete all as directed.
199S&F in replacement ofstop solenoid assembly 24 VDC for pump suitable for DG Set Capacity 160 KVA to 400 KVA complete all as directed.
200S&F in replacement ofstop solenoid assembly 24 VDC for pump suitable for DG Set Capacity 500 KVA to 630 KVA complete all as directed.
201Replacement of defective / unserviceable thermostat element (74 Deg) suitable for DG Set capacity 10 to 50 KVA complete all as directed.
202Replacement of defective / unserviceable thermostat element (74 Deg) suitable for DG Set capacity 62.5 to 125 KVA complete all as directed.
203S&F in replacement Metallic Fan blade of DG set 20 to 62.5 KVA Capacity
204S&F in replacement V belt cogged of DG Set 10 to 62.5 KVA Capacity
205S&F in replacement V belt cogged of DG Set 82.5 to 250 KVA Capacity
206S&Finreplacement of AVR complete all as specified and as directed for DG Set of Capacity 10 KVA to 82.5 KVA
207M&L inreplacement of AVR complete all as specified and as directed for DG Set of Capacity 100 KVA to 400 KVA
208S&F in replacement of self starter 12Volt of DG set Capacity 10 KVA to 30 KVA complete all as specified.
209S&F in replacement of self starter 12Volt of DG set Capacity 50 KVA to 125 KVA complete all as specified.
210S&F in replacement of alternator 12 Voltof DG set 10 KVA to 30 KVA as per existing all as specified.
211S&F in replacement of alternator 12 Volt of DG set 50 KVA to 125 KVA as per existing all as specified
212S&F in replacement of alternator 24 Voltof DG set 82.5 KVA to 160 KVA as per existing all as specified.
213S&F in replacement of self starter 24 Volt of DG set Capacity 180 KVA to 400 KVA complete as specified & directed. Make : Kirloskar/Cummins /Mohindra.
214S&F fuel pump assly of DG set as per exisitng complete all as specified
215S&F in replacement Battery Terminals Copper.(Positive & Nagative) complete.
216S&F in replacement copper cable conductor multistranded, PVC insulated heavy duty, single core of size 50 sqmm including cable lugs, thimbles etc complete all as specified and directed
217Supply & pouring K cool super plus-50-50 PREMIX of 1 Ltrs sealed Packing all as specified.
218S&F in replacement Radiator hose (for water pipe) for DG Set of Capacity 20 KVA to 125 KVA complete all as specifed.
219S&F in replacement Fuel pipe of feed pump to filter and fuel filter to fuel pump for DG Set complete all as specifed.
220S&F in replacement shut down valve 24 Volts for DG set of Capacity 50 KVA to 82.5 KVA complete all as specified.
221S&F in replacement battery charger 24 Volts for DG set of Capacity 100 KVA to 320KVA complete all as specified.
222S&F in replacement water pump assembly with DEL Body complete all as specified and directed Engineer –in-charge.
223S&F in replacementBattary 12 volt 32 Ah with SMPS charger for DG set complete all as specified.
224S&F in replacementBattary 12 volt 150 Ah maintenance free type with two year warrantyfor DG set complete all as specified.
225S&F in replacement battery charger 12 Volts for DG set of Capacity 10 to 63 KVAcomplete all as specified.
226S&F in replacementBattary 12 volt 180 Ah maintenance free type with two year warrantyfor DG set complete all as specified.
227Supply in replacement, install, testing and commissioning of AMF Panel shall be of suitable size factory made indoor cubical type front openable fabricated from CRCA steel sheet 1.6 mm thick complete as per manufacturer specification of Diesel Engine suitable for DG Set of Capacity upto 160 KVA grouted in floor by providing PCC 1:2:4 type B-2 foundation of suitable size as per manufacturers recommendations complete in all respects and consisting of the following :-(a) Main & DG Incomer:-(i) 250 Amp 4 pole MCCB 25 KA with Thermal magnatic trip unit having O/L, S/C and G/F protection - 02 Nos, (ii) Spreaders with Phase Barrier - 04 Nos, (iii)Extended Rotary handle - 02 Nos, (iv)1 AUX.Switch C/O Contact of SDE/SDVNS80 - 04 Nos, (v)Green indicator LED type 230 VAC for MCCB OFF - 02 Nos, (vi)Red indicator LED type 230 VAC for MCCB ON - 02 Nos, (vii)Amber indicaor LED type 230 VAC for MCCB Trip - 02 Nos, (viii)Digital VAF meter - 02 Nos, (ix)Miniature circuit breaker 6 A SP for control - 04 Nos, (x)Surge protectiion device - 01 No, (xi)63A 4P MCB for SPD Backup - 01 No, (xii)Current transformer 250/5A 10VA CL.1 Tape wound(b) Automatic changeover- contractor Based:-(i)225A 4P Power contractor 02 Nos, (ii)Coil for 225A contractor 220V AC - 02 Nos, (iii)Auxilary contractor -02 Nos, (iv)Red indicator LED type 230VAC for ON - 02 Nos, (v)Miniatue circuit breaker 6 A SP for control - 02 Nos, (vi)Over voltage / under voltage protection relay - 02 Nos, (vii)Frequency protection relay - 02 Nos(c ) Manual changeover bypass system(i)250A Manual oload changeover - 02 Nos, (ii)Red indicator LED type 230VAC for ON - 04 Nos(d)Secondary material :-(i)Encloser box fabricted with CRCA sheet 14 & 16 SWG sheet powder coated with siemens gray colour front operation panel - 01 No, (ii) 250A colour coded AL.BUS bar current density 0.8 with Shrinable sleeves - 01 No, (iii)Power & control wiring as per required - 01 No, (iv)Door locks & Hings - 01 No, (v)PV, MCB Channel,Terminal blocks, Thimbles & Ferrules, end lock, earthing strip, sprial, tie tie base - 01 No, (vi)Rubber Gasket & engraving Name plates - 01 No, (vii)Hardware & Misc - 01 No
228Supply in replacement, install, testing and commissioning of AMF Panel shall be of suitable size factory made indoor cubical type front openable fabricated from CRCA steel sheet 1.6 mm thick complete as per manufacturer specification of Diesel Engine suitable for DG Set of Capacity upto 250 KVA grouted in floor by providing PCC 1:2:4 type B-2 foundation of suitable size as per manufacturers recommendations complete in all respects and consisting of the following :-(a) Main & DG Incomer:-(i) 250 Amp 4 pole MCCB 25 KA with Thermal magnatic trip unit having O/L, S/C and G/F protection - 02 Nos, (ii) Spreaders with Phase Barrier - 04 Nos, (iii)Extended Rotary handle - 02 Nos, (iv)1 AUX.Switch C/O Contact of SDE/SDVNS80 - 04 Nos, (v)Green indicator LED type 230 VAC for MCCB OFF - 02 Nos, (vi)Red indicator LED type 230 VAC for MCCB ON - 02 Nos, (vii)Amber indicaor LED type 230 VAC for MCCB Trip - 02 Nos, (viii)Digital VAF meter - 02 Nos, (ix)Miniature circuit breaker 6 A SP for control - 04 Nos, (x)Surge protectiion device - 01 No, (xi)63A 4P MCB for SPD Backup - 01 No, (xii)Current transformer 250/5A 10VA CL.1 Tape wound(b) Automatic changeover- contractor Based:-(i)225A 4P Power contractor 02 Nos, (ii)Coil for 225A contractor 220V AC - 02 Nos, (iii)Auxilary contractor -02 Nos, (iv)Red indicator LED type 230VAC for ON - 02 Nos, (v)Miniatue circuit breaker 6 A SP for control - 02 Nos, (vi)Over voltage / under voltage protection relay - 02 Nos, (vii)Frequency protection relay - 02 Nos(c ) Manual changeover bypass system(i)250A Manual oload changeover - 02 Nos, (ii)Red indicator LED type 230VAC for ON - 04 Nos(d)Secondary material :-(i)Encloser box fabricted with CRCA sheet 14 & 16 SWG sheet powder coated with siemens gray colour front operation panel - 01 No, (ii) 250A colour coded AL.BUS bar current density 0.8 with Shrinable sleeves - 01 No, (iii)Power & control wiring as per required - 01 No, (iv)Door locks & Hings - 01 No, (v)PV, MCB Channel,Terminal blocks, Thimbles & Ferrules, end lock, earthing strip, sprial, tie tie base - 01 No, (vi)Rubber Gasket & engraving Name plates - 01 No, (vii)Hardware & Misc - 01 No
229Supply and fixing DG safety and control panel which includes Micro based over temprature protection, low lubricant oil pressure protection, over load protection, ground fault protection, coolant level protection, fuel low level indication protection etc, panel support for local and remote control for existing AMF panel complete all as specified and directed by Engr-in-Charge.
230Opening of all electrical connections from the bushings/terminal box of the serviceable DG Sets , indoor/outdoor type from existing position/location of any make & specifications of capacity upto 315 KVA& loading the DG Set with suitable crane and transporting the DG Set to desired location given by Engr-in-Charge and re-assembling after shifting, connecting all eletrical/meachnical connections, commissioning of DG Set on load after testingcomplete all as specified & as directed.
231All as per Sl item No 230 above but capacity 320 to 630 KVA DG set
232Repairs/maint of broken doors of existing DG Sets including replacement of suitable hinjes with nuts, bolts and washers and replacement of suitable locking arrengements along with suitable broken glass covers of DG Set Capacity up to 250 KVA complete all as specified & as directed.
233All as per Sl item No 232 above but capacity 320 to 630 KVA DG set

AI Tender Summary

OUR REF NO 38324364
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 15-07-2023
Authority
Authority Name Military Engineer Services
Work Description Repair And Maintenance Of Dg Sets And Allied Works At Af Stn Halwara
Basic Detail
Tender No GE/HAL-25/2023-24
Bidding Type Tender
Location
City halwara
State Punjab
Key Dates
Publish Date 23 Jun 2023
Submission Date 15 Jul 2023
Open Date 17 Jul 2023
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 80000
Exemption Not Available
Document List
Tendernotice_1.pdf
78f3a56b-8d18-47a4-9621-ad5cd0ce2c71.html
BOQ_677410.xls
Tender_Document25.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 23, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 15, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 17, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

html

78f3a56b-8d18-47a4-9621-ad5cd0ce2c71.html

xls

BOQ_677410.xls

pdf

Tender_Document25.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders