Orissa Bridge And Construction Corporation Limited has published Tender For Provision Of Furniture For Odia University At Satyabadi, Puri. Submission Date for this Tender is 14-07-2023. Footwears Tenders in satyabadi Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Wish Workstation (Godrej/ Haworth/ Herman Miller/ featherlite) - 28 Nos. |
| 2 | INTERMEDIATE BLOCKS: Intermediate blocks are given in DL + DL finish. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Pedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. KBPT with mousetray - metal |
| 3 | ECHO HDU - 900 x 1219 x 450 (Godrej/ Haworth/ Herman Miller/ featherlite) - 23 Nos. |
| 4 | Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting for height adjustment. The SDU runs in a PVC track mounted on the TOP and Bottom panel of the Body. HDU has a three point lock and SDU has a push type lock. All the storages are fitted with a 6 mm leveler at bottom for leveling |
| 5 | Thrill cushion HB leatherette in black colour (Godrej/ Haworth/ Herman Miller/ featherlite) - 61 Nos. |
| 6 | SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are: - 1) HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H) 2) FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H) 3) SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. 3. ARMRESTS (THRILL PLUS CHAIR) : The adjustable armrest is designed with the following features: - Up-Down adjustment– 6 steps (7.2 ± 0.5cm range), Armrest top is mounted on Armrest structure made of glass filled Nylon, Armrest Top is PU moulded over glass filled Nylon insert. 4. ARMRESTS (THRILL Executive CHAIR) : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features: - 1) Up-Down adjustment–7 steps (7.0 ± 0.5cm range); 2)It has to & fro movement along with Swivel adjustment. 5. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: - 360° revolving type, 3 position locking with anti shock mechanism, Tilt tension adjustment. 6. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm 7. PEDESTAL ASSEMBLY ( THRILL PLUS) : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). 8. PEDESTAL ASSEMBLY (THRILL EXECUTIVE) : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). 9. TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. |
| 7 | Elegance AV U Shape - 6232 mm X 1726 mm X 740 mm (Godrej/ Haworth/ Herman Miller/ featherlite) - 1 No. |
| 8 | Work Surface : Made of 36mm thick MDFone side prelaminate board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Full length access panel is provided with soft closing hinges inline with worktop edge. Worktop is available in various shapes as shown above. Understructure- The understructure consist of mixture of 18mm and 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Wire Management: - An array of panels made of 0.8mm and 1.2 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Cutout for Standard Anchor Roma 4 module is provided for electrical fittings in Straight two seater and single seater modules below access flap per seat. AV Details: -The table is equipped with Extron cables cubbies along with cable retractors as standard offering only for 1800mm head module, 2350mm head module, 150° head module and 165° head module. For straight two seater and single seater modules, provision to mount AV cables is provided (eg. HDMI,VGAA, etc). Only Corner 90°, 30° corner and 50° corner modules have provision for wire flow between adjacent tables. Additional Wirecover made of 0.8mm Thick CRCA, provided below worktop to conceal Microphone wires running from table top to wire tray. |
| 9 | Kareena NXT High Back (Godrej/ Haworth/ Herman Miller/ featherlite) - 2 Nos. |
| 10 | SEAT/BACK ASSEMBLY: The seat should bemade up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should bemade up 1.2 ±0.1cm. thick hot pressed plywood and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should bedesigned with contoured lumber support for comfortable seating posture: -BACK SIZE48cm.(W) X 76.0cm.(H); SEAT SIZE51.0cm.(W) X 48.0cm.(D); HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should bemoulded with density = 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgffor 25% compression. ARMRESTS :The armrest top should bemade of moulded polyurethane (P.U) and mounted on to a drop lift height adjustable type M.S. tubular armrest support chrome plated. The armrest height should beadjustable up to 6.5±0.5cm. in 5 steps & also has swivel adjustment of 22º±2° on both sides. KNEE TILT SYNCHRO mechanism WITH SEAT DEPTH ADJUSTMENT mechanism: The mechanism should bedesigned with the following features:- 360° revolving type, Single point control, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 4-position locking with anti-shock feature, Seat back tilting ratio of 1:2, Seat depth adjustment of 6.0 ±0.5cm. can be locked in 6 positions. ADJUSTABLE BACKREST: The backrest consshould be ts of a sliding up down mechanism, which can be adjusted in the range of 7.5±0.5cm. and can be locked in 5 positions for correct position of lumber support. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 9.0 ±0.3cm. PEDESTAL ASSEMBLY:The pedestal should befabricated from 0.2 ± 0.02 cm thick HR sheet ( should be: DD 1079 / HRskin pass ),chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twinwheel castors. The pedestal should be66.0±0.5cm. Pitch-center dia. (76.0±1.0 cm with castors). TWIN WHEEL CASTORS: - The twin wheel castors should beinjection moulded in black Nylon. Overall Dimensions of Chair: - Seat Height - min 47.5 to max 57.5cm.; Height - min 103.5 to max 120.5cm. Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. |
| 11 | Kareena NXT Mid Back (Godrej/ Haworth/ Herman Miller/ featherlite) - 18 Nos. |
| 12 | SEAT/BACK ASSEMBLY: The seat should bemade up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should bemade up 1.2 ±0.1cm. thick hot pressed plywood and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should bedesigned with contoured lumber support for comfortable seating posture: -BACK SIZE48cm.(W) X64.5cm.(H); SEAT SIZE51.0cm.(W) X 48.0cm.(D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should bemoulded with density = 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgffor 25% compression. 3. ARMRESTS :The armrest top should bemade of moulded polyurethane (P.U) and mounted on to a drop lift height adjustable type M.S. tubular armrest support chrome plated. The armrest height should beadjustable up to 6.5±0.5cm. in 5 steps & also has swivel adjustment of 22º±2° on both sides. 4.KNEE TILT SYNCHRO mechanism WITH SEAT DEPTH ADJUSTMENT mechanism: -The mechanism should bedesigned with the following features:- 360° revolving type., Single point control, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 4-position locking with anti-shock feature, Seat back tilting ratio of 1:2, Seat depth adjustment of 6.0 ±0.5cm. can be locked in 6 positions. 5. ADJUSTABLE BACKREST: The backrest consshould be ts of a sliding up down mechanism, which can be adjusted in the range of 7.5±0.5cm. and can be locked in 5 positions for correct position of lumber support. 6.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment of 9.0 ±0.3cm. 7.PEDESTAL ASSEMBLY:The pedestal should befabricated from 0.2 ± 0.02 cm thick HR sheet ( should be: DD 1079 / HRskin pass ),chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twinwheel castors. The pedestal should be66.0±0.5cm. Pitch-center dia. (76.0±1.0 cm with castors). 8.TWIN WHEEL CASTORS The twin wheel castors should beinjection moulded in black Nylon. Overall Dimensions of Chair: - Seat Height - min 47.5 to max 57.5cm.; Height - min 93.4 to max 110.4cm.; Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. |
| 13 | Kareena NXT Visitor (Godrej/ Haworth/ Herman Miller/ featherlite) - 10 Nos. |
| 14 | 1.SEAT/BACK ASSEMBLY: The seat should bemade up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should bemade up 1.2 ±0.1cm. thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should bedesigned with contoured lumber support for comfortable seating posture. MID BACK SIZE 48.0cm.(W) X 64.5cm.(H) SEAT SIZE51.0cm.(W) X 48.0cm.(D) 2.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should bemoulded with density = 45±2 kg/m³ and Hardness load 16 ± 2 kgffor 25% compression. 3.ARMRESTS:The armrest top should bemade of moulded polyurethane (P.U) and mounted on to a fixed type M.S. tubular armrest support which should bechrome plated. The arm support has static vertical adjustment of ±1.5±0.05cm. 4.FIXED BACKREST: The backrest consshould be ts of a fixed type mechanism i.e. no back up/down adjustment. 5.LEG FRAME ASSEMBLY: The leg frame welded assembly should bechrome plated, made from 3.5 ±0.03cm. x 1.5 ±0.02cm. x 0.16 ±0.0128cm. thk Elliptical M.S. ERW tube and provided with a base plate for seat fixing. Overall Dimensions of Chair Seat Height - 47.7cm. Height - 93.0cm. Width & Depth of Chair as measured from pedestal - Width-66.5 cm and Depth-61.6 cm. |
| 15 | ARISTO TBL 1800 LH RU 1200 PDL (Godrej/ Haworth/ Herman Miller/ featherlite) - 5 Nos. |
| 16 | 1800x2100x750 Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. |
| 17 | ARISTO BCKUNT 1650W 1100H (Godrej/ Haworth/ Herman Miller/ featherlite) - 5 Nos. |
| 18 | 1650 x 500 x 1100 Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.Storage is provided with lock for security |
| 19 | Thrill executive cushion FB leatherette in black colour (Godrej/ Haworth/ Herman Miller/ featherlite) - 5 Nos. |
| 20 | SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are: -1) HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H); 2) FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H); 3)SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. 3. ARMRESTS (THRILL PLUS CHAIR) : The adjustable armrest is designed with the following features: -Up-Down adjustment– 6 steps (7.2 ± 0.5cm range, Armrest top is mounted on Armrest structure made of glass filled Nylon, Armrest Top is PU moulded over glass filled Nylon insert. 4. ARMRESTS (THRILL Executive CHAIR) : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features: - 1) Up-Down adjustment–7 steps (7.0 ± 0.5cm range); 2) It has to & fro movement along with Swivel adjustment. 5. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: -1) 360° revolving type; 2) 3 position locking with anti shock mechanism; 3) Tilt tension adjustment 6. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm 7. PEDESTAL ASSEMBLY ( THRILL PLUS) : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). 8. PEDESTAL ASSEMBLY (THRILL EXECUTIVE) : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). 9. TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. |
| 21 | Thrill executive cushion FB leatherette in black colour(Godrej/ Haworth/ Herman Miller/ featherlite) - 10 Nos. |
| 22 | SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are: - 1) HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H); 2) FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H); 3) SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. 3. ARMRESTS (THRILL PLUS CHAIR) : The adjustable armrest is designed with the following features: - 1) Up-Down adjustment– 6 steps (7.2 ± 0.5cm range): - 1) Armrest top is mounted on Armrest structure made of glass filled Nylon; 2) Armrest Top is PU moulded over glass filled Nylon insert. 4. ARMRESTS (THRILL Executive CHAIR) : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features: - 1) Up-Down adjustment–7 steps (7.0 ± 0.5cm range; 2) It has to & fro movement along with Swivel adjustment. 5. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:- 1) 360° revolving type; 2) 3 position locking with anti shock mechanism.; 3) Tilt tension adjustment 6. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm 7. PEDESTAL ASSEMBLY ( THRILL PLUS) : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). 8. PEDESTAL ASSEMBLY (THRILL EXECUTIVE) : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). 9. TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. |
| 23 | Thrillcushion FB leatherette in black colour(Godrej/ Haworth/ Herman Miller/ featherlite) - 16 Nos. |
| 24 | SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are: -*HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H); *FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H); *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. 3. ARMRESTS (THRILL PLUS CHAIR) : The adjustable armrest is designed with the following features · Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) · Armrest top is mounted on Armrest structure made of glass filled Nylon. · Armrest Top is PU moulded over glass filled Nylon insert. 4. ARMRESTS (THRILL Executive CHAIR) : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features: - 1) Up-Down adjustment–7 steps (7.0 ± 0.5cm range); 2) It has to & fro movement along with Swivel adjustment. 5. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: - 1) 360° revolving type; 2) 3 position locking with anti shock mechanism.; 3) Tilt tension adjustment 6. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm 7. PEDESTAL ASSEMBLY ( THRILL PLUS) : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). 8. PEDESTAL ASSEMBLY (THRILL EXECUTIVE) : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). 9. TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. |
| 25 | Versa Neo Visitor(Godrej/ Haworth/ Herman Miller/ featherlite) - 19 Nos. |
| 26 | 1)SEAT/BACK ASSEMBLY: The Cushioned seat should bemade of Injection molded Plastic outer & inner. Plastic Inner should beupholstered with stitched cover and moulded High Resilience Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression.The stitched cover should bemade from spacer fabric and leatherette. Cushioned back should bemade of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with spacer fabric and leatherette. Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK SIZE : 45 cm. (W) x 60.5 cm. (D) 2)Visitor TUBULAR FRAME: The powder coated (DFT 40-60 micron) tubular frame should becantilever type & made of 02.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube.The back connected to frame through powder coated (DFT 40-60 micron) high pressure die cast connector piece. Overall Dimensions of Chair Seat Height - 44.8cm. Height - 99.5cm. Width-60.9 cm and Depth-64.3 cm. |
| 27 | Pisa sofa 3+2 SEATER (Godrej/ Haworth/ Herman Miller/ featherlite) - 4 Nos. |
| 28 | Pisa sofa 2 SEATER: - SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 146.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM. Pisa sofa 3 SEATER: - SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM. |
| 29 | Pisa Center table (Godrej/ Haworth/ Herman Miller/ featherlite) - 5 Nos. |
| 30 | 1)PISA SIDE TABLE & CENTER TABLE GLASS: It is 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for focing with understructure. 2)PISA SIDE & CENTER TABLE UNDERSTRUCTURE: It is a welded Assembly made in SS202 grade Dia. 12±0.04 as per IS:1762. Width of table= 112.0 cm, Depth=60.0 cm, height=34.9 cm. |
| 31 | Pisa Side table (Godrej/ Haworth/ Herman Miller/ featherlite) - 6 Nos. |
| 32 | Pisa Side table (Godrej/ Haworth/ Herman Miller/ featherlite) - 6 Nos.Pisa Side table (Godrej/ Haworth/ Herman Miller/ featherlite) - 6 Nos.Pisa Side table (Godrej/ Haworth/ Herman Miller/ featherlite) - 6 Nos.Pisa Side table (Godrej/ Haworth/ Herman Miller/ featherlite) - 6 Nos.Pisa Side table (Godrej/ Haworth/ Herman Miller/ featherlite) - 6 Nos.Pisa Side table (Godrej/ Haworth/ Herman Miller/ featherlite) - 6 Nos.Pisa Side table (Godrej/ Haworth/ Herman Miller/ featherlite) - 6 Nos. |
| 33 | MERAKI TVUNIT Brn/Beige (Godrej/ Haworth/ Herman Miller/ featherlite) - 5 Nos. |
| 34 | Overall Size :Width : 120cmDepth : 56cm Height : 192cm(Without Bush)Material : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Upper vertical side are of 18 mm thickness in PU. Bottom side doors are of 18 mm thick MDF in PU on front. Bottom middle doors are made of 4 mm thick toughened glass with PU paint in black.All doors are fitted with push to open fittings. Levellers are provided on vertical panels at back to rest the unit properly against the wall .Hardware : Hettich . Construction : Knock down .Finish : All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 3 nos |
| 35 | 4 door Bookcase with Metal Top (Godrej/ Haworth/ Herman Miller/ featherlite) - 19 Nos. |
| 36 | 4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA.Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). |
| 37 | 4 Drawer Filing Cabinets (Godrej/ Haworth/ Herman Miller/ featherlite) - 29 Nos. |
| 38 | Vertical Filing Cabinets whcih use less floor space. Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided alongwith Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). |
| 39 | Entpr 1200 without CPU hanger (Godrej/ Haworth/ Herman Miller/ featherlite) - 9 Nos. |
| 40 | Enterprise 1200 Table without CPU Hanger size shall be1200Width mmx 600Depth mmx 728 Height mm. Top shall be18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster)and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . |
| 41 | Entpr 1500 with CPU hanger (Godrej/ Haworth/ Herman Miller/ featherlite) - 5 Nos. |
| 42 | Enterprise 1500 Table with CPU Hanger size shall be1500Width mmx 750Depth mmx 728 Height mm. Top shall be18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster)and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster). |
| 43 | Oxbo Midback (Godrej/ Haworth/ Herman Miller/ featherlite) - 7 Nos. |
| 44 | SEAT ASSEMBLY: The seat assembly should bemade up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The back asembly. should bemade of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should beupholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm (W) x 60.5 cm (H); HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should bemoulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression. ARMRESTS: The one-piece armrests should beinjection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should bedesigned with the following features: • 360° revolving type, 17° ±2° maximum tilt on pivot at centre, Upright position locking, Tilt tension adjustment.. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSY: The bellow should be3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should beinjection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors should beinjection moulded in black nylon. Overall Dimensions of Chair: - 1) Seat Height - min 43.3 to max 54.3cm; 2) Height - min 89.5 to max 100.5cm; 3) Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. |
| 45 | Storwel plain (Godrej/ Haworth/ Herman Miller/ featherlite) - 36 Nos. |
| 46 | Storwel plain shall have an overall size of916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. |
| 47 | PREMIUM LOUNGE CHAIRS - 3 Seater (Godrej/ Haworth/ Herman Miller/ featherlite) - 2 Nos. |
| 48 | 1) SIDE FRAME ASSEMBLY: The side frame assembly should befitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should bemade of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn and black powder coated ( DFT 40-60 microns ). The ends should befitted with ABS moulded end caps. 2) TIE MEMBER: It should bethe connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should beused to connect the side frames. The tie-member should beof 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cm x 0.16cm and black powder coated ( DFT 40-60 microns ). The seat/back assemblies should bemounted on one of the tie-member which has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5 ±0.1cm. thk -- 5.5 ±0.1cm Long MS. Std. angles welded to mount the seat and back. 3) SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 ± 2 kgffor 25% compression of the foam. The complete moulded seat rest assembly should becovered with a replaceable fabric upholstery cover *SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) 4 )BACKREST ASSEMBLY:The backrest assembly should beflexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 ± 2 kgffor 25% compression of the foam. The complete moulded backrest assembly should becovered with a replaceable fabric upholstery cover. *BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) 5) ADJ. GLIDES: The adj. glide should beinjection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take cshould beor unleveled floor surface. Overall Dimensions of Chair Seat Height - 43.5 cm. Height - 78.5cm. Width & Depth of Chair as- Width-164.0cm and Depth-70.0 cm. |
| 49 | Finnesse Table-5026+ ERU 3616 LHS+Pedestral (Godrej/ Haworth/ Herman Miller/ featherlite) - 23 Nos. |
| 50 | Finesse Table - 5026size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Finesse ERU -3616 LHS size shall be 1050 Widthx 450 Depthx 705 Height. The top ofFinesse ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. Free Standing Ped with Castors for Finnesse Table: - Overall Dimensions of Free Standing Ped With Castors For Finnesse Table shall be 390mm(W)x440mm(D)x646mm(H). The construction & Material used shall be welded assembled , 0.8 mm thick CRCA for body shell , drawer front & tray , front side stiffener ,rear aide stiffener and 1.2 mm thick CRCA Top stiffener & Bottom stoffener . The drawer fronts shall be metal front straight edge . Locking shall be 10 lever cam lock & Central RH locking with actuator & lock channel mechanism for box-box-file Pedestal . The top panel shall be metal straight edge top . Castor should be swiveling non - lockable castors mounted below the body shell for free standing full height mobile pedestal and M8 Leveling stud for free standing pedestal . The anti-tipping mechanism shall have fifth roller arrangement mounted below file drawer to avoid toppling of unit when file drawer is pulled out . Partition in drawer shall be 1 no. Partition in box drawers with lock mounted . Plastic pencil tray shall be optional accessory . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Application shall be suitable for pushing below work surface which has got a clear height of 725 mm from below . For drawer pulling side wise tapered recess provided in shell behind drawer fronts. |
| 51 | PARTO Pl 3Str Sofa SLthr Blk (Godrej/ Haworth/ Herman Miller/ featherlite) - 2 Nos. |
| 52 | Overall Size : Width: 175cm Depth : 87cm Height : 76cm Seating Height : 39.5cm STITCHING: THREAD : Poly Proplin. LEATHER/PVC/FABRIC: PVC. Thickness (mm) : 0.9 Weight (GSM) : 575 |
| 53 | Meraki corner table Brown (Godrej/ Haworth/ Herman Miller/ featherlite) - 3 Nos. |
| 54 | Overall Size : Width : 60cmDepth : 60cm Height : 49.8cm Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.Drawer bottom is made of .9 mm thick prelaminated particle board .Drawer front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : Knock down .Finish :All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 1 nos . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Hardware : Hettich . Construction : Knock down .Finish : • All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 1 nos |
| 55 | PREMIUM LOUNGE CHAIRS - 2 Seater (Godrej/ Haworth/ Herman Miller/ featherlite) - 1 No. |
| 56 | 1) SIDE FRAME ASSEMBLY: The side frame assembly should befitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should bemade of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn and black powder coated ( DFT 40-60 microns ). The ends should befitted with ABS moulded end caps. 2) TIE MEMBER: It should bethe connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should beused to connect the side frames. The tie-member should beof 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cm x 0.16cm and black powder coated ( DFT 40-60 microns ). The seat/back assemblies should bemounted on one of the tie-member which has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5 ±0.1cm. thk -- 5.5 ±0.1cm Long MS. Std. angles welded to mount the seat and back. 3 )SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 ± 2 kgffor 25% compression of the foam. The complete moulded seat rest assembly should becovered with a replaceable fabric upholstery cover *SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) 4) BACKREST ASSEMBLY:The backrest assembly should beflexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 ± 2 kgffor 25% compression of the foam. The complete moulded backrest assembly should becovered with a replaceable fabric upholstery cover. *BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) 5) ADJ. GLIDES: The adj. glide should beinjection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take cshould beor unleveled floor surface. Overall Dimensions of Chair Seat Height - 43.5 cm. Height - 78.5cm. Width & Depth of Chair as- Width-113.0cm and Depth-70.0 cm. |
| 57 | ARTO Pl 2 Str Sofa SLthr Blk (Godrej/ Haworth/ Herman Miller/ featherlite) - 1 No. |
| 58 | Overall Size : Width: 134cm Depth : 87cm Height : 76cm Seating Height : 39.5cm STITCHING: THREAD : Poly Proplin. LEATHER/PVC/FABRIC: PVC. Thickness (mm) : 0.9 Weight (GSM) : 575 |
| 59 | CIGNUS TBL 2100 LH RU 1200 PDL (Godrej/ Haworth/ Herman Miller/ featherlite) - 1 No. |
| 60 | 2100x2250x750 Primary Work Surface:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Secondary Work Surface:Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Softclosing access flap with in-build power box are provided on work surface for wire management. Modesty Panel:Made of 25mm thick MDF one side laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Under- structure:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. |
| 61 | CIGNUS BCKUNT 1650W 1800H (Godrej/ Haworth/ Herman Miller/ featherlite) - 1 No. |
| 62 | 1650x500x1800 Top Panel:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Slide Door Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves.Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security. Display/Storage Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side,back and shelves. Doors are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top |
| 63 | Marvel High Back (Godrej/ Haworth/ Herman Miller/ featherlite) - 1 No. |
| 64 | SEAT ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm ARMRESTS: The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360" revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS:The twin wheel castors should beinjection moulded in black PP having 6.0± 0.1cm wheel Diameter. Overall Dimensions of Chair: - 1) Seat Height -43.1-53.1cm; 2) Height -112.7-130.2cm.; 3) Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm. |
| 65 | Marvel Visitor (Godrej/ Haworth/ Herman Miller/ featherlite) - 3 Nos. |
| 66 | 1) SEAT ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) 2) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D) Visitor TUBULAR FRAME: The tubular frame should becantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should beconnected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair Seat Height -44.8cm Height -98.2cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.2 cm. |
| 67 | Encardo 3+1+1 (Encardo Annexe 1-Seater Sofa Slthr Cappuccino - 2 Nos. & Encardo Annexe 3-Seater Sofa Slthr Cappuccino- 1 No.(Godrej/ Haworth/ Herman Miller/ featherlite) |
| 68 | Encardo Annexe 1-Seater Sofa Slthr Cappuccino: - total length-670. total height-850. total width-835. stitching: thread- polypropylene. leather: pu german leather bn 3592. leg material: solid rubber wood. Encardo Annexe 3-Seater Sofa Slthr Cappuccino: - Dimensions W x H x D (cm) - 179 x 85 x 83.5 Finish Color - Cappuccino Net Weight (kg) - 85 Primary Material - Solid Wood Upholstery Material - Leatherette Seat Height (cm) - 55 Warranty - 1 Year Style - Contemporary & Modern Delivery Condition - Knock Down |
| 69 | Bloom Coffee Table Walnut (Godrej/ Haworth/ Herman Miller/ featherlite) - 1 No. |
| 70 | Overall Size : Width : 100cm Depth : 65cm Height : 43cm TABLE MATERIALS: Glass of 08 mm thk tempered, Solid rubber woood legs and frame, MS sheet as bottom shelf . DECORATION MATERIALS & SPECIFICATIONS: (DENSITY / TYPE): PU coating to the rubber wood parts, clear glass. |
| 71 | Bloom Corner Table Walnut (Godrej/ Haworth/ Herman Miller/ featherlite) - 1 No. |
| 72 | Overall Size : Width : 60cm Depth : 60cm Height : 45cm TABLE MATERIALS: Glass of 08 mm thk tempered, Solid rubber woood legs and frame, MS sheet as bottom shelf . DECORATION MATERIALS & SPECIFICATIONS: (DENSITY / TYPE): PU coating to the rubber wood parts, clear glass. |
| 73 | Versa canvas visitor (Godrej/ Haworth/ Herman Miller/ featherlite) - 44 Nos. |
| 74 | 1) SEAT ASSEMBLY/BACK ASSEMBLY: The Cushioned seat should bemade of Injection molded Plastic outer & inner. Plastic Inner should beupholstered with foam laminated fabric and moulded High Resilience Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression. The Cushioned back should bemade of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with foam laminated fabric. Seat SIZE : 46.0 cm. (W) x 48.0 cm. (D) BACK SIZE : 46.6 cm. (W) x 59.6 cm. (D) 2) Visitor TUBULAR FRAME : The powder coated (DFT 40-60 micron) tubular frame should becantilever type & made of 02.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube.The back connected to frame through powder coated (DFT 40-60 micron) high pressure die cast connector piece. Overall Dimensions of Chair Seat Height - 44.6cm. Height - 98.2cm. Width-60.9 cm and Depth-64.3 cm |
| 75 | PISA 3 Str (Godrej/ Haworth/ Herman Miller/ featherlite) - 2 Nos. |
| 76 | SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM. |
| 77 | Glass door Storwel (Godrej/ Haworth/ Herman Miller/ featherlite) - 2 Nos. |
| 78 | Glass Door Storwel shall have an overall size of916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt .It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. |
| 79 | Upbeat - 32 Nos. |
| 80 | RDNC DR1 MTL SW 1200mm 600mm (Godrej/ Haworth/ Herman Miller/ featherlite) - 12 Nos. |
| 81 | 1200W X 600D X 2078H Body - a. Side panels, Frame & Cross L bracket are made using 0.8 mm CRCA (IS:513). b. The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’. The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade. c. Optional wooden panel of 25mm thk PLT, E1-P2 grade board for PLT ref. Specification - FF04/DSN/STD/101, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue Under Structure - Under structure is made of 0.8m CRCA (IS:513). b. Sizes of under structure for single body: -1) 1200W x 295D x 80H; 2) 2400W X 295D X 80H Shelves - a. Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513). b. Shelf panels are placed on shelf support and then fixed using nut and bolts from below. c. Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit. d. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum. Construction- Completely Knock down construction Finish-All MS sheetmetal and metal frame components are powder coated with epoxy polyester powder to the min thickness of min 45 microns. Stackability- The add-on units can be stacked width wise to form a bank of racks having common side panel up to 4800W Shelves back stiffener - At the rear side of the shelves back stiffeners are provided. These act as separators made of 0.8mm THK CRCA (IS:513). Label Holder -It is an aluminum extrusion of length 296mm for single body bookrack , fitted on to front of body. The Paper is 300GSM matt finish, to be inserted into the aluminum extrusion. The length of paper is 296mm for single body bookrack. Optional Accessory - Rollout shelf: Rollout shelf accessory is a pull-out tray which has 2 nos. ‘C shaped brackets of 1.2mm thk. Firmly mounted on shelf support with adjustable height. Slides are then fixed on these C brackets and rollout shelf assembly is mounted on the slides. This shelf opens outwards up to 250mm & has load capacity of 40 KG UDL. b) Book Separator: Book separator is made of 2mm thk. CRCA sheet (IS:513) and is used to as a partition and support for books placed vertically on a shelf. |
| 82 | RDNC SR1 MTL SW 1200mm 300mm (Godrej/ Haworth/ Herman Miller/ featherlite) - 11 Nos. |
| 83 | 1200W X 300D X 2078H Body - a. Side panels, Frame & Cross L bracket are made using 0.8 mm CRCA (IS:513). b. The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’. The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade. c. Optional wooden panel of 25mm thk PLT, E1-P2 grade board for PLT ref. Specification - FF04/DSN/STD/101, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue Under Structure - Under structure is made of 0.8m CRCA (IS:513). b. Sizes of under structure for single body: - 1) 1200W x 295D x 80H; 2) 2400W X 295D X 80H Shelves - a. Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513). b. Shelf panels are placed on shelf support and then fixed using nut and bolts from below. c. Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit. d. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum. Construction- Completely Knock down construction Finish-All MS sheetmetal and metal frame components are powder coated with epoxy polyester powder to the min thickness of min 45 microns. Stackability- The add-on units can be stacked width wise to form a bank of racks having common side panel up to 4800W Shelves back stiffener - At the rear side of the shelves back stiffeners are provided. These act as separators made of 0.8mm THK CRCA (IS:513). Label Holder -It is an aluminum extrusion of length 296mm for single body bookrack , fitted on to front of body. The Paper is 300GSM matt finish, to be inserted into the aluminum extrusion. The length of paper is 296mm for single body bookrack. Optional Accessory - Rollout shelf: Rollout shelf accessory is a pull-out tray which has 2 nos. ‘C shaped brackets of 1.2mm thk. Firmly mounted on shelf support with adjustable height. Slides are then fixed on these C brackets and rollout shelf assembly is mounted on the slides. This shelf opens outwards up to 250mm & has load capacity of 40 KG UDL. b) Book Separator: Book separator is made of 2mm thk. CRCA sheet (IS:513) and is used to as a partition and support for books placed vertically on a shelf |
| 84 | TOPO HICIRCLE GREEN (Godrej/ Haworth/ Herman Miller/ featherlite) - 28 Nos. |
| 85 | 1. WORKTOP (PU): Worktop is made of 25mm MDF OSR with pu matt finish on top side. Hardness on top surface is 2H. The worktop is available in 5 shapes; viz.: Circle, Bite, Rectangle, Square & Facet. 2. UNDER-STRUCTURE: The under-structure consists of an Inner Tube Assembly with Top Plate, for Worktop Mounting, & an Outer Tube Assembly with Round/Square Bottom Plate. The Inner & Outer Tube Assemblies are telescopically connected. The Top Plate is made of 5mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) & the bottom plate is made of 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 082.5 x 2thk ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The Outer Tube Assembly is made of 89 x 2.5 thk and ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The whole structure is EPOXY POLYESTER Powder Coated (DFT 40-60 microns). The product has a knock-down construction. It is assembled using alloy steel hardware (blackened & coated with rust preventive oil). |
| 86 | Unwind with SS understructure (Godrej/ Haworth/ Herman Miller/ featherlite) - 56 Nos. |
| 87 | The Seat and Back should bemade up of injection moulded indoor grade PolyPropylene compoundSEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H).The powder coated ( DFT 50±10 microns ) welded tubular frame should bemade from 0 2.22 ± 0.03 cm x 0.12 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.12 ± 0.0128 cm stainless steel 202 grade tube. The shoes should bemade of indoor grade PolyPropylene compound and snap fitted with tubular frame. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-52.5 cm and Depth-55.8 cm. |
| 88 | Time Out 4 Seater PU Coated (Godrej/ Haworth/ Herman Miller/ featherlite) - 18 Nos. |
| 89 | Time Out 4 Seater PU Coated size shall be1135 Width mmx 1175 Depth mmx 750 Height mm. Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking. |
| 90 | Unwind with SS Understructure (Godrej/ Haworth/ Herman Miller/ featherlite) - 72 Nos. |
| 91 | The Seat and Back should bemade up of injection moulded indoor grade PolyPropylene compoundSEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H).The powder coated ( DFT 50±10 microns ) welded tubular frame should bemade from 0 2.22 ± 0.03 cm x 0.12 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.12 ± 0.0128 cm stainless steel 202 grade tube. The shoes should bemade of indoor grade PolyPropylene compound and snap fitted with tubular frame. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-52.5 cm and Depth-55.8 cm. |
| 92 | Table T-31 (Godrej/ Haworth/ Herman Miller/ featherlite) - 65 Nos. |
| 93 | Table - T 31 size shall be900 Widthx 590 Depthx 750 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall besq. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mmthick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic. |
| 94 | GAIN PRO LOCKER GNPRO PLU MN GRGL 6 DR CL - 1 No. & GNPRO PLU AD GRGL 6 DR CL - 3 Nos. (Godrej/ Haworth/ Herman Miller/ featherlite) |
| 95 | Product Size - 375(W) x 470(D) x 1950*(H) *Height including leveler * Height of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction.The add-on units are stack widthwise to form a row of Lockers. (Note- Single Main unit should not be offered.Minimum 1Main + 1Addon to be offered, Maximum 1Main + 4Addon to be offered) Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** -CRCA "D" Grade as per IS-513 -CRCA "D" Grade as per IS-513 Doors (Without envelope slot) - Made from 0.6mm Thick CRCA (D Grade, IS-513)Soft closing hinge. Door size - For 6 Door locker - 373(W) X 18(T) X 314(H) Cam Lock - Oval knob that functions as a handle - Click action mechanism - Key removal in locked and unlocked position - Zinc alloy die cast housingZinc alloy die cast housing Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). |
| 96 | OXBO - Visitor (Godrej/ Haworth/ Herman Miller/ featherlite) - 2 Nos. |
| 97 | SEAT ASSEMBLY: The seat assembly should bemade up of 1.2 ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The back asembly. should bemade of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should beupholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should bemoulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression. ARMRESTS: The one-piece armrests should beinjection moulded from black Co-polymer Polypropylene. . TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should becantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube. Overall Dimensions of Chair Seat Height - 46.5cm. Height - 93.5cm. Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm. |
| 98 | Eq with slatted mattress base with musquito rod (Godrej/ Haworth/ Herman Miller/ featherlite) - 64 Nos. |
| 99 | EQ bed with slatted mattress base with headboard & EQ bed Mosquito net rod: - Overall Size: Width - 2050.0 mm Depth - 973.0 mm Height - 720.0 mm.Material :Headboard panels are made of 18 mm thick Prelaminated Particle Board.All the exposed edges are edge banded with 2 mm thick PVC edge banding.Bed leg frame structure consist of metal frames made of M.S. 50x 25 mm box section in 1.2 thickness Internal Pipes made of 19 x 19 mm box section in 0.9 mm thickness. Headboard pipes are made of 25 x 25 mm box section in 0.9 mm thickness. Mattress holding bkt is made of 0.6 mm CRCA SHEET.Hardware :The high quality hardware used .Construction: Knock Down construction.Packets: 1 packet. Finish:18 mm thick Prelaminated Particle Board is in 4501, make — GODREJ (SHIRVAL). Bed leg frame structure are powder coated in shade : MATT TAUPE WHITE. REF NO. 9001904 to thickness of 50 microns (+-10). Rest all metals are powder coated in shade : S/G CHARBROWN. REF NO. 9000605 to thickness of 50 microns (+-10). |
| 100 | Hero Mat 78 36 4 (Godrej/ Haworth/ Herman Miller/ featherlite) - 64 Nos. |
| 101 | Thickness 50 mm. Matt. Dimensions L x W x T (cm) - 198.1 x 182.9 x 12.7 Finish Color - Red Layers - Multiple Mattress Size - King Warranty - 2 Years Primary Material - PU Foam Mattress Top-Normal |
| 102 | Pillow Nice L:425mm W:675mm (Godrej/ Haworth/ Herman Miller/ featherlite) - 64 Nos. |
| 103 | Size ( in cm) : 43 x 69 • Open cell structure that reacts to body heat and weight by moulding to the sleeper’s body • Organic Cotton Fabric for extra comfort • Anti-fungal & Anti-allergic • Excellent neck support • Outstanding elasticity • Durable |
| 104 | MULTIPURPOSE - Cushioned Chair 4 Legged W/o Armrest (Godrej/ Haworth/ Herman Miller/ featherlite) - 64 Nos. |
| 105 | 1)SEAT/BACK ASSEMBLY: The seat and back should bemade from 1.0±0.1cm. thk. hot pressed moshould be ture resistant tant.commercial plywood and upholstered with P.U. foam and fabric. BACK SIZE: 42.0cm. (W) X 26.5cm. (H)SEAT SIZE: 42.0cm. (W) X 42.0cm. (D) 2)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should bemoulded with density =45+1-2 kg/m3 and Hardness load 16 ± 2 kgffor 25% compression. 3)UNDERSTRUCTURE ASSEMBLY: The understructure assembly should bea cantilever type mainframe made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated--( DFT 40-60 microns ) Overall Dimensions of Chair Seat Height - 45.5 cm. Height - 78.5cm. Width & Depth of Chair as measured from base - Width-52.0cm and Depth-60.5 cm. |
| 106 | KD Plain with 4 SHELVES (Godrej/ Haworth/ Herman Miller/ featherlite) - 64 Nos. |
| 107 | Plain, Partition & Minor 2 Product Size: Plain : 900 mm (W) x 450 mm (D) x 1830* mm (H); Partition : 900 mm (W) x 450 mm (D) x 1830 *mm (H); Minor: 900 mm (W) x 450mm (D) x 1167.5*mm (H)(*- Height excluding leveler) 3 Construction & Material • Rigid Knock down construction. • Prime Quality CRCA** Steel - Panels from 0.6 mm thick (±0.07mm) & Front frame, Shelf 0.8 mm thick (±0.08mm). **CRCA ‘D’ grade as per IS:513 4 Configuration (Door) • Full height Steel Hinged Door 5 Locking & handle : • Plastic Recessed Handle cum Cam Lock • 3 way locking mechanism with shooting bolt arrangement. 6 Shelving : • Height wise Adjustable Shelf Mounting, Uniformly Distributed Load Capacity per each full/half shelf is 40 Kg maximum, Plain 4s : 4 Nos. of Adjustable Full Shelves, Plain 3s : 3 Nos. of Adjustable Full Shelves, Partition : 1 Fixed full shelf at top and 4 Nos. of Adjustable half Shelves, Minor : 2 Nos. of Adjustable Full Shelves Kd Storwel Plain 4s- The A4 size Box file (85Wx345Hx285D) can be stored vertically on three shelves and the clear space above fourth shelf is 180mm. Kd Storwel Plain 3s- The A4 size Box file (85Wx345Hx285D) can be stored vertically on three shelves . Kd Storwel Partition- The A4 size Box file (85Wx345Hx285D) can be stored vertically on three half shelves . Clear space above fourth half shelf is 250mm. Kd Storwel Minor- Box file A4 size (85Wx345Hx285D) can be stored vertically on two shelves and the clear space above third shelf is 280mm. 7 Leveler Screw type leveler with Hex. Plastic base (add in unit height min-8mm & additional 5mm max. for adjustment. 8 Hanging rod For Partition only- 1no. of half length hanging rod on right half of partion below top shelf 9 Top • Plain & Partition : Metal Top only • Minor : Option of Metal or Plain wooden top(Add in unit height 1mm for metal Top & 25mm for Wooden top) (Note- Wooden top packed seperately) 10 Finish • Epoxy Powder coated to the thickness of 50 microns (+/-10) |
| 108 | Adria Queen Bed Imperial Oak (Godrej/ Haworth/ Herman Miller/ featherlite) - 16 Nos. |
| 109 | OverallSize:Width - 1570 mm Depth — 2046 mm Height — 901 mm Material:3Bed Structure consist of metal frames made of M.S. Channels in 1.0mm Thickness. Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986).Plinth support assembly is made of M.S. 25 mm square pipe in 1.2 mm thickness. Head boardis made of 18 mm thick PrelaminatedParticle board IS:12823 Class E1 (as per EN13986) with 2mm edge banding glued with Hot Melt EVA glue. Tail board is made of 18 mm thick Prelaminated Particle board IS:12823 Class E1 (as per EN13986) with 0.8mm edge banding glued with Hot Melt EVA glue.Side rail is made of 18 mm thick Prelaminated Particle board 1S:12823 Class E1 (as per EN13986) with 0.8mm edge banding glued with Hot Melt EVA glue.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle 1S:12823 Class E1 (as per EN13986) with 0.8mm edge banding glued with Hot Melt EVA glue. Hardware :The high quality hardware are used.Construction:Knock Down construction.Packets :2packet.Finish :.18 mm thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986) is in Imperial Oak shade. Lipping shade is 299P MAKE REHAU |
| 110 | Hero Mat 78 60 4 (Godrej/ Haworth/ Herman Miller/ featherlite) - 16 Nos. |
| 111 | Thickness 50 mm. Matt. Dimensions L x W x T (cm) - 78 x 60 x 4 (inches) Finish Color - Red Layers - Multiple Mattress Size - King Warranty - 2 Years Primary Material - PU Foam Mattress Top-Normal |
| 112 | Nice Pillow (Godrej/ Haworth/ Herman Miller/ featherlite) - 32 Nos. |
| 113 | Size ( in cm) : 43 x 69 • Open cell structure that reacts to body heat and weight by moulding to the sleeper’s body • Organic Cotton Fabric for extra comfort • Anti-fungal & Anti-allergic • Excellent neck support • Outstanding elasticity • Durable |
| 114 | Adria Bed Side Table (Godrej/ Haworth/ Herman Miller/ featherlite) - 32 Nos. |
| 115 | Overall Size :Depth — 461.0 mm Width — 460.0 mm Height — 510.0 mm Material:Body panels of Bed side table are made of 18 mm thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986) .All the exposed edges are edge banded with 0.8 mm thick PVC edge banding glued with Hot Melt EVA glue.Drawer front are made of 18 mm thick Prelaminated Particle board 1S:12823 Class E1 (as per EN13986). Hardware:The high quality hardware used like Roller slides, Hinges , minifix, dowels is of make Hettich.Construction:Knock Down construction. Packets :1 packet.Finish :.18 mm thick PrelaminatedParticle Board 1S:12823 Class E1 (as per EN13986) is in Imperial Oak shade.Lipping shade is 299P MAKE REHAU |
| 116 | Adria Work Desk (Godrej/ Haworth/ Herman Miller/ featherlite) - 16 Nos. |
| 117 | Overall Size • Width — 900.0 mm Depth — 600.0 mm Height — 713.0 mm Material All panels are made of 18 mm thick Prelaminated Particle Board All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Hardware : The high quality hardware used like KD fittings, wooden dowels is of Make Ebco and Hettich |
| 118 | Thrill Cushion FB Knitted (Godrej/ Haworth/ Herman Miller/ featherlite) - 16 Nos. |
| 119 | SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. The chair seat & back size are *HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H) *FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H) *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. 3. ARMRESTS (THRILL PLUS CHAIR) : The adjustable armrest is designed with the following features: - 1) Up-Down adjustment– 6 steps (7.2 ± 0.5cm range); 2) Armrest top is mounted on Armrest structure made of glass filled Nylon; 3) Armrest Top is PU moulded over glass filled Nylon insert. 4. ARMRESTS (THRILL Executive CHAIR) : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features: - 1) Up-Down adjustment–7 steps (7.0 ± 0.5cm range); 2) It has to & fro movement along with Swivel adjustment. 5. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: - 360° revolving type, 3 position locking with anti shock mechanism,Tilt tension adjustment. 6. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm 7. PEDESTAL ASSEMBLY ( THRILL PLUS) : The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1±1.0cm with castors). 8. PEDESTAL ASSEMBLY (THRILL EXECUTIVE) : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). 9. TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon |
| 120 | Adria 3Dr WRDRB Imp Oak (Godrej/ Haworth/ Herman Miller/ featherlite) - 16 Nos. |
| 121 | OverallSize:Width : 120cmDepth : 54.8cmHeight : 191cm Material:3 Body panels are made of 18 mm thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986). All the exposed edges are edge banded with 0.8 mm thick PVC edge banding glued with Hot Melt EVA glue . Door are made of 18 mm thick Prelaminated Particle board IS:12823 Class E1 (as per EN13986) with all the exposed edges are edge banded with 0.8 mm thick PVC edge band glued with Hot Melt EVA glue.Drawer componentsare made of 18 mm thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986) .All the exposed edges are edge banded with 0.8 mm thick PVC edge banding glued with Hot Melt EVA glue.Body back and drawer bottom are made of 9 mm thick Prelaminated particle board IS: 12823 Class E1 (as per EN13986). Hardware:The high quality hardware used like Roller slides, Hinges , minifix, wooden dowels is of make Hettich.. Lock used for middle door is 3 way lock. Lock used for right hand door and drawer is cam lockConstruction :Knock Down construction. Packets : 4 packet.Finish :18 mm thick Prelaminate Particle Board 1S:12823 Class E1 (as per EN13986) is in Imperial Oak shade.Lipping shade is 299P MAKE REHAU |
| 122 | TECHNICAL PRODUCT SPECIFICATION- Shortcut® TS312 Series Multipurpose Seating with Tripod Base (Steelcase/ Herman Miller/ HNI Furniture) - 200 Nos. |
| 123 | Country of Origin: America POSITIONING STATEMENT Shortcut for education supports multiple approaches to learning, many forms of technology, and differing levels of collaboration in the same space. Its modern design, comfortable and generous seat, abbreviated elbows, and flexible shell with a Tripod Base make it the perfect classroom chair. Overall width-Chair with tripod base and personal worksurface: 34-1/2”W Overall depth- Chair with tripod base and personal worksurface: 31”W SEAT-Seat freely swivel 360 degrees in infinite increments independent of the base to allow user to remain comfortable, increase sightlines and encourage interaction with others. Seat and backrest are one piece molded polypropylene shell for ease of maintenance. A cut-out in the rear surface allows for more flex and adds visual interest BACKREST-Chair features a lumbar support curve incorporated into the design of the backrest. Lumbar support is located at 9-5/16” from the seat or optimal comfort. ARMS- Arms are of a recessed and cantilevered design which supports a number of different postures and seated positions including side sitting. Arms have a minimum height of 24-5/8”H from the floor. TRIPOD BASE- Tripod Base is molded glass-filled nylon plastic with a molded polypropylene concave Base Tray with perforations. Base features a 23-5/8” diameter storage tray with 1.7 cu./ft. available for temporary placement of backpacks, purses, etc. Base features six dual wheel swivel casters for ease of mobility from a seated position or standing. PERSONAL WORKSURFACE- Personal Worksurface is a laminated assembly of nylon, sound-deadening nonwoven polypropylene sheet and the durable outer surface of an engineering resin blend. Provides at least 265 square inches of usable surface. Mounted on the right, but appropriate for both right- and left-handed users. Worksurface pivots 48 degrees. Combined support post and worksurface pivots a total of 100 degrees. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
