|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in foundation and plinth in: |
| 2 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 4 | 12 mm cement plaster of mix : |
| 5 | 1:6 (1 cement: 6 fine sand) |
| 6 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: |
| 7 | Two or more coats on new work. |
| 8 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 9 | Of area beyond 3 sq. metres |
| 10 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50metres lead : |
| 11 | Up to 10 mm thick |
| 12 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 13 | For fixed portion |
| 14 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 15 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 16 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 17 | Removing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles system of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections including stacking at required place and refixing the same after closing the MS frame with weld mesh ventilator with aluminium glazed partition in Pantry of 5th Floor, RMC-DC, Telephone Bhavan, Saifabad |
| 18 | Providing and fixing decorative teak wood beading 50mm width all round granite inauguration plaque of size 600x450mm in corridor of RMC-DC, 5th Floor, Telephone Bhavan, Hyderabad complete as per directions of Engineer in charge. |
| 19 | Providing and fixing 100mm wide vertical venetian blinds of approved shade, colour, fabric along with all hardware as per manufacturers specification etc., of\"VISTA\" or equivalent all complete as per the directions of Engineer-In-Charge. Rate includes cost of control unit, runners, tilter, transverse cord, tilt rod, bottom mechanism such as bottom weight, bottom chain etc., complete.equivalent all complete as per the directions of Engineer-In-Charge. Rate includes cost of control unit, runners, tilter, transverse cord, tilt rod, bottom mechanism such as bottom weight, bottom chain etc., complete. |
| 20 | Providing and fixing calcium silicate board with suitable screws for wall panelling on existing framework etc. complete as per directions of Engineer in charge |
| 21 | 8 mm thick |
| 22 | Providing and fixing golden letters acrylic sheet board with photo frame for Conference Hall of size 6 feet x 4 feet i.e., 24 sft area for display of DOT logo and text as per requirement etc., complete as per directions of Engineer in charge. |
