Tender For Improvement To Nanza Ganeshwadi Road V.R.148 In Km 0/00 To 2/00 Tq. Kalamb Dist,Yavatmal
Tender Value
50 Lakhs
Estimated cost
Bid Submission
30 Jun 2023
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
1120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalamb → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement To Nanza Ganeshwadi Road V.R.148 In Km 0/00 To 2/00 Tq. Kalamb Dist,Yavatmal
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 2 | Providingandconstructing50mm.thick Modified PenetrationMacadam(MPM)road surfaceincluding allmaterials,preparingthe existingroadsurface,spreading 40mm.stone layers metal 100%crusher broken metal with conical crusher palnt, heating and spraying the [email protected]/SquareMetre,spreading12mm.sizechips compactingwithStaticrollerhavingweight8to10MT.toachivethedesireddegreeof compaction as per Technical Specification Clause 506 etc.complete, including applying tack coatattherateof0.30KilogramSquareMetre.onexistingbitumensurface.(VG-30bulk bitumen rates are considered to arrive at rates)KM-1 |
| 3 | KM-2 |
| 4 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rollingtoachievethedesiredcompactionbutIncluding tackcoat.For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) KM-1 |
| 5 | KM-2 |
| 6 | 9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ 1.2Kilogram/Sq.m,preparing existing road surface by mechanical means, spreading chipsandrolling,bystaticrollerhavingweight8to10MT.etc.complete.(VG-30bulk bitumen rates are considered to arrive at rates) KM-1 |
| 7 | KM-2 |
| 8 | Supplying hard murum/ kankar at the road site, including conveyingand stacking complete.KM-1 |
| 9 | KM-2 |
| 10 | Sperading ggravel / sand/soft murum /avilable murum over rubble soning /W.B.M. Surface blanketing berms etc.complete |
| 11 | Compactingthehardmurumsidewidthsincludinglayinginlayersoneachsidewithvibratory roller including artificial watering etc. complete. |
| 12 | Excavationforcatch/sidewatergutterinallsortsofsoilstothe specifiedsectionincludingstacking theexcavatedstuffinaregular bund and disposing of unsuitable or excess stuff as directed all sortsof soils. |
| 13 | ProvidingandfixingRoadjunction/Informationsignboardofsize0.90mx0.60m. preparedon16gaugeM.S.sheetwithangleironframeofsize35x35x5mmincluding painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post inonepiecewithoutjointsincludingalltaxes,conveying,fixingingroundwithcement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. |
AI Tender Summary
Tender Timeline
Jun 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 30, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 03, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender