}

Tender For Special Repair Replacement Of Asbestos Sheets With Colour Coated Cgi Sheets At Csd Depot Bd Bari Mil Stn Under Ge Kaluchak, kaluchak-Jammu And Kashmir

Military Engineer Services-MES has published Tender For Special Repair Replacement Of Asbestos Sheets With Colour Coated Cgi Sheets At Csd Depot Bd Bari Mil Stn Under Ge Kaluchak. Submission Date for this Tender is 20-07-2023. Sheet Tenders in kaluchak Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

38304913
Corrigendum : Tender For Special Repair Replacement Of Asbestos Sheets With Colour Coated Cgi Sheets At Csd Depot Bd Bari Mil Stn Under Ge Kaluchak
Open Tender
Indian
Jammu And Kashmir
kaluchak
20-07-2023

Tender Details

Special Repair Replacement Of Asbestos Sheets With Colour Coated Cgi Sheets At Csd Depot Bd Bari Mil Stn Under Ge Kaluchak

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 13-Jul-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 20-07-2023

Key Value

Document Fees
INR 500 /-
EMD
INR 85000.0 /-
Tender Value
INR 42.50 Lakhs /-

BOQ Items

Name of Work: SPECIAL REPAIR / REPLACEMENT OF ASBESTOS SHEETS WITH COLOUR COATEDSHEETS AT CSD DEPOT BD BARI MIL STN UNDER GE KALUCHAK
Sl. No. Item Description
1Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed.
2Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified & directed.
3Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6 but except brick i.e. using serviceable bricks obtained from Srl item No. 01 here-in-before, complete all as specified & directed.
4Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed & directed.
515mm thick rendering in cement mortar1:4 onfair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified & directed.
6Preparation of new plastered surfaces of wallsand applying two coats of weather proof exterior emulsion paint over a coat of primer, complete all as specified & directed.
7Complete removal of existing treatment from old decoratedplastered surfacesof walls, preparation of surfaces byapplying wall care putty in holes and dents for making the rough surfaces to smooth finish and applying two coats of weather proof exterior emulsion paintover a coat of primer, complete all as specified & directed.
8Pre-painted galvalume aluminum zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified & directed.
9Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in as in ridges, hips, valley gutters, drip and straight flashings, fixed with self tapping screws, complete all as specified & directed.
10Dismantling asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, complete all as specified & directed.
112mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap, fixed with `L’ & `J’ hooks and washers, complete all as specified & directed.
12RCC 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified & directed.
13Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for(Reinforcement cut as required to facilitate demolition), complete all as specified & directed.
14Use & waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc alo splays between floors and beams for rough finished surfaces of concrete, complete all as specified & directed.
15TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified & directed.
1675mm thick PCC 1:3:6, nominal mix, type C2, using 40mm graded crushed stone aggregate as in plinth protection, surface finished even and smooth without using extra cement including forming and filling of joints 12mm wide with bituminous filler, complete all as specified & directed.
17PVC floor dividing strips, 1.5mm thick and 38mm wide, complete all as specified & directed.
18Demolition of cement concrete (un-reinforced) of any description in any position not otherwise specifically provided for, complete all as specified & directed.
193mm thick figured glass, pin headed type and glazing with oil putty or wooden beads or glazing pins in squares not exc. 0.5 Sqm in each pane, complete all as specified & directed.
203mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads or glazing pins in metal frame in squares not exc. 0.5 Sqm in each pane,complete all as specified & directed.
21Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads, n exc 1.5 sqm, complete all as specified & directed.
22Preparation of old painted steelsurfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified & directed.
23Rolled mild steel work in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-290 grade-E-165, complete all as specified & directed.
24Preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats ofsynthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified & directed.
25Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified & directed.
26Preparation of old decorated plastered or unplastered surface of walls including cornices, pilasters etc by brooming down or by steel wire brushes, scrapingdown smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of white wash, complete all as specified & directed.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail