Tender For Erection Of Motor And Water Supply Arrangements At Ariyandivalasu In Vellakovil Municipality
Tender Value
3.30 Lakhs
Estimated cost
Bid Submission
27 Jun 2023
0 days left
EMD
3300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Erection Of Motor And Water Supply Arrangements At Ariyandivalasu In Vellakovil Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork open excavation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing the excavated earth within the compound in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and leveling etc. complete complying with standard specification. |
| 2 | Supplying and fixing of 5.0 HP Air Compressor with 3 phase 5HP Motor - 1440 RPM etc Complete, Including Cost and conveyance charges, loading and unloading charges, Providing Motor bed and Motor Hdpe Hose Pipe erection Charges… |
| 3 | Supply of 11/2\" dia flex hdpe hose PN 16 suitable for air compressure motor with water line including cost and conveyance of pipe to the site etc complete as per std specification. |
| 4 | Supply of 5/8 \" dia flex hdpe hose 10kg/cm2suitable for air compressure motor with water line including cost and conveyance of pipe to the site etc complete as per std spn |
| 5 | Supplying fixing of 50 mm dia G.I pipe B class cut into 3m lengthand threaded on both sides with an extra coupling as per standard quality including transporting the same to the site directed by the departmental officers etc complete as standard specification. |
| 6 | Supplying fixing of 11/2\" dia G.I pipe B class cut into 3m lengthand threaded on both sides with an extra coupling as per standard quality including transporting the same to the site directed by the departmental officers etc complete as standard specific |
| 7 | Supplying fixing of 3/4\" dia G.I pipe B class cut into 3m lengthand threaded on both sides with an extra coupling as per standard quality including transporting the same to the site directed by the departmental officers etc complete as standard specifi |
| 8 | Supplyingof 63 mm dia PVC 6 KSc pipe with ISI marked including transporting the same to the site directed by the departmental officers etc complete as standard specifications |
| 9 | Supplying and fixing Pvc water tank including cost and conveyance of tank and fixing in proper position etc complete as per std specification. |
| 10 | Supply and Delivery of GI & PVC Specials |
| 11 | 3/4\" GI Coupling |
| 12 | 3/4\" x 9\" GI Pipe Nipple |
| 13 | 3/4\" GI Elbow |
| 14 | 3/4\" x 18\" GI Pipe Nipple |
| 15 | 3/4\" GI Union |
| 16 | 3/4\" x 24\" GI Pipe Nipple |
| 17 | 3/4\" x 4\" GI Pipe Nipple |
| 18 | 7\" Borewell Cover |
| 19 | 11/4\" CI Clamp Set |
| 20 | 11/4\" GI Hose Connector |
| 21 | 11/4\" GI Bend |
| 22 | 11/4\" x 6\" GI Pipe Nipple |
| 23 | 11/4\" GI Union |
| 24 | 11/4\" GI Coupling |
| 25 | 11/4\" GI Elbow |
| 26 | 11/4\" x 12\" GI Pipe Nipple |
| 27 | 11/4\" x 2\" GI Reducer Coupling |
| 28 | 2\" x 12\" GI Pipe Nipple |
| 29 | 2\" PVC Fta |
| 30 | 2\" GI Elbow |
| 31 | 2\" x 24\" GI Pipe Nipple |
| 32 | 2\" GI Bend |
| 33 | 2\" GI Coupling |
| 34 | 2\" PVC Bend |
| 35 | 2\" x 18\" GI Pipe Nipple |
| 36 | 2\" x 11/4\" PVC Reducer Coupling |
| 37 | 11/4\" PVC Ball Valve |
| 38 | 11/4\" PVC Elbow |
| 39 | 11/4\" PVC Tee |
| 40 | 2\" PVC Tee |
| 41 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 42 | Random rubble masonry in cement motor 1:5 (one Part of cement, Five part of Sand) mix using all granite stones and bond stones for foundation and basement from approved quarry including watering, curing, and labour charges etc., completed as per standard specification |
| 43 | Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 44 | Supply and fixing of RCC precast slab in cement concrete 1:1.5:3 mix (One cement one and half Crushed Stone Sand and three aggregate) using 20 mm ISS metal including cost of moulding charges mixing, laying and curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification but including cost of reinforcement (50mm thick) |
| 45 | Lowering of 63 mm dia PVC rigid pipes and specials to trench and laying to proper grade and alignment jointing with PVC couplers with cement paste and testing to the required pressure including conveyance of water for filling during testing.etc complete |
| 46 | Supply and Delivery of DOL Starter with Single phasing preventor with ammeter and sutable panel board including all cost of conveyance charges etc complete |
| 47 | Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 nosx32 amps fuse unit (500 V) 32A neutral link and earth ( 1\" x 1/8 \" copper flat) on teak wod plank of size 600 mm x450 x 19mm with supporting Teak wood reeperetc complete (SD 127) |
| 48 | Supply and fixing of 32A TPN metal clad switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing (SD 163) |
| 49 | Supply and run of 4 of 4 sqmm (56/0.3) PVC insulated Single core unsheathed Cu.Conductor of 1100 v grade on 7/20 GI bearer wire for service connection mains (SD 67) |
| 50 | Supply and run of 4 of 4 sqmm (56/0.3) PVC insulated Single core unsheathed Cu.Conductor of 1100 v grade in 20 mm GI Pipe (Class \" B\") Bend at Both ents with necessary angle iron up right and Supports (SD 72) |
| 51 | Supply and fixing of 32 Amps fuse unit including all cost and Conveyance of materials and labour charges etc complete as per std specification |
| 52 | Supplying and fixing steel door double lead made out of 18 gauge M.S. sheet outer frame of 40 mm x 40 mm x 6 mm \"L\" angle linner frame of 30 mm x 30 mm x 5 mm \"L\" angle cross stiffener M.S. flat 25 mm x 6 mm with aldrop 1 No, tower bolts 4 Nos. two handlde and six hold fast complete welded and revitted and painted one coat of red oxide paint including cost and conveyance of all materials and labour etc., complete |
| 53 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 54 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m |
| 55 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 56 | Goods and Service Tax (GST 18%) |
AI Tender Summary
Tender Timeline
Jun 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender