Rajasthan State Warehousing Corporation-RSWC has published Tender For Construction Of Cement Concrete Road, And Electrification Work At State Warehouse Anoopgarh. Submission Date for this Tender is 13-07-2023. Road Work Tenders in Ganganagar Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | C.C.Road |
| 2 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size). |
| 3 | Construction ofun-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 602.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approvedfixed side formwork(steel channel, laying and fixing of 125 micronthick polythenefilm, wedges,steel plates includinglevellingtheformworkasperdrawing),spreadingthe concretewith shovels, rakes, compactedusing needle, screed and plate vibrators and finished incontinuous operation including provision of contractionand expansion, constructionjoints, applying debondingstrips,primer,sealant,dowelbars, near approachesto bridge/culvert and construction joints, admixturesas approved, curing of concrete slabs for 14-days,using curing compoundand water finishing to lines and grade as per drawingand MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments |
| 4 | Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3Construction of embankment with approved material obtained from borrow pits with alift upto 1.5 m,transporting tosite, spreading, grading to required slope and compacting to meet requirement of Tables 300-1 and 300-2 with a lead upto 50 m as per MoRTH Specification Clause 305.3 up to lead 10 km. |
| 5 | Electrification |
| 6 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. nominal size FR PVC insulated unsheathed flexible copperconductor 1.1 KV grade and 1.5 sq. mm. nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade(IS : 694) ofapproved make on surface ISI marked(IS-19427-P-II) PVCcasing capping and its accessories, round tiles, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point 6 A switch, 3.0 mm. thick ISI marked phenolic laminated sheet, zinc plated/brass screw, cup washers, making connections, testing etc. as required. Short point (upto 3mtr.) Group-2(a) Short Point (upto 3 mtr.) |
| 7 | (b) Medium Point (upto 6 mtr.) |
| 8 | (c) Long Point (upto 10 mtr.) |
| 9 | Wiring for 3 pin 5 amp light plug point with 1.5 sqmm. nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 Sq. mm. nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS:694) of approved make in surface/recessed ISI marked medium duty PVC conduit and it"s accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in swith board & falce ceiling point, 6 A swith, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated/ brass screws, cup washers, making connections, testing etc. as required on board. Grade-II. |
| 10 | Providing & Fixing of Street light bracket made out from following size of " B " class , Medium class G.I. Pipe confirming to IS : 1239 P - 1 ( 2004)withheavydutypoleclamp,Saddlessuitablefastnersetc.As required.AllasperpreapprovedbyEngineerincharge. For additional technical parameters of products/ work, refer Annexure 40 mm Dia. |
| 11 | S&Ffollowingsizes(dia.)ofISImarkedmediumdutyPVCconduitalongwithaccessoriesinsurface/recessedusingsaddles,clamps,fastenerasrequiredincludingcuttingthewall,coveringconduitand making good the same as required. 25mm |
| 12 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required. Group p-2(a)1 x 1.5 sq.mm |
| 13 | (b)2 x 2.5 sq.mm |
| 14 | [c]2 x 4.0 sq.mm for powder circuit |
| 15 | Providing & Laying P.V.C./ XLPE insulated & P.V.C. sheathed Un-armoured / Armoured copper cable of 1.1 KV grade as per PWD specification for electrical Worksin existing RCC / Hume/ Stoneware/ PVC pipe/ open duct/cable trench with filling of excavated earth in trench, on existing cable trays or on surface etc.including making necessary connection, testing etc. as required of size andas per points (a), (b), (c), mentioned below:- 4 core |
| 16 | P&F two pin energy efficient compact flourscent lamp in existing holder/fixture as required. 36 watt 4 pin Group-II |
| 17 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/C/D tripping characterstic) ISI marked IS 8828 (1996)/ conforming to IEC 60898 in existing boards/sheets including making connections with lugs, testing etc. as required6 A to 32 A rating(Havells, HPL, SSK, Anchor, Khaitan).Grade-II. |
| 18 | P&F 240/415 V isolator conforming to IS:13947-III/IEC 60947-3 on existing board/sheet including making connections with lugs, testing etc. as required 63 A rating (Havells, HPL, SSK, Anchor, Khaitan) Grade-II. |
| 19 | P&F Recessed/Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ power painted complete with 100 A copper bus bar, shorting link, neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs, testing etc. as required Single door (single phase) 12 Way. Grade-II. |
| 20 | Providing and fixing ofnon modular power plugpoint accessories as per PWD specification for electrical Works with 18 SWG G Ibox of size 175 x 100 x 60 mm with earthing terminal/connector onrecessed/surface with suitable size phenolic laminated sheet (IS : 2036 -1995) cover including cost of 16 amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outlet[ as per detailed in respective item in BSR], making connection , testing , etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . |
| 21 | Providing & Fixing ofISI marked(IS:2268-1994) ding dong/musical chime bell as per PWD specification for electrical Works, including making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . |
| 22 | Providing & Fixing of ISO Certified company made BEE Star rated copper wounded double ball bearing capacitor start, aluminium body& Metallic blade ceiling fan asperPWDspecificationforelectrical Works,conformingtoIS:374-2019,&IS:1885-P-V- 1981. with down rod up to 30 cm with secondary support safety cable ( steel wire ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor makingconnectiontestingetc.as required. Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer in charge. Foradditionaltechnicalparametersof products/work,refer Annexure "A"attached with this BSR . 1200 mm Sweep BEE 2 Star rated (service value >=4.5 to < 5 ) |
| 23 | Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/Extruded AlBase Housing & diffuser SMD Mid Power LED tube (with integral driver), on existing fixture. Power Consumption of18W / 20W system lumen efficacy = 110 lm/Watt output, internal surge protection of 2.5KV,THD<15%,p.f.=0.95,CRI >80,lifetimeofminimum35000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer Annexure "A" attacheded with this BSR. 4", 18/ 20 Watt LED Tube Without Batten (Extruded AlBase) |
| 24 | Providing & Fixing of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipationfins onhousing with UV stabilized PC/Toughened Glass cover (UV stablzation report submitted for UV cover ) and secondary lens on each LED & should be SMD type . The System level Luminaire efficacy >=120 lm/ wtwith High Power LEDs is to be usedand potted drivermustbepotted&hasauniqueBISRnumberwith Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety ,Input Frequency 50Hz±3% Power Factor >0.95 driver Efficiency>85% ,THD(I)<10% Humidity10%to90%RH Working Temp -5C to 45C .driver current <1000mA shown in LM79 report.Theluminaire shallbeBIScertifiedand T.C. certified. Life ExpectancyEqual or more than 50000 burning hrs with Minimum 70%lumenmaintened,colorRenderingIndex>70andCCT 5700K +355K. Surge protection shall be min = 4 KV internal and min 10 KV external. driver should be Phase to phase protection of 440 V for 4 Hrs. ManufacturesWordMark/NameEngraved/Embossingondie cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced. OEMMusthaveitsowninhouseNABLlabsetupforalltesting facilitiesfor LEDfixtures. (LM79/LM80)Certificate/reportwith liable warranty of product/accessories from OEM shall be submitted. AllasperpreapprovedbyEngineerincharge. Foradditional technicalparametersofproducts/ work , refer Annexure "A" attached with this BSR . LED Street Light fixture 30 Watt |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
