Supply Of Diesel Generator. ( 25Kva-2, 25Kva With Trolley-1 , 62.5Kva-1 ) ( S.No 01 ) , Supply , Installation, Testing And Commissioning Of Silent Dg Set ( As Per Latest Cpcb Emission Norms ) Having Specifications As Per A, B, C, D, E, F, G, H , A. 1500 Rpm Diesel Engine Conform To Bs:649 / 5514 Of Suitable Bhp Engine Shall Have Residential Silencer ( Isolated From Main Dg Chamber ) , Up To 3 M Exhaust Piping ( With Insulation & Cladding ) As Required . , B. Ac Brush Less Spdp Alternator Conform To Bs 5000 ( Part 99 ) Or Is 4722.-2001 . Alternator Shall Be Self Regulated With Standard Alternator Protection ( Over Voltage , Over Speed & Under Voltage, Under Speed Warning & Shutdown ) .Engine & Alternator Mounted On A Common Base Frame & Coupled Through A Flexible Coupling Or Close Coupled , C. Standard Canopy With Weatherproof, Powder Coated Accoustic Enclosure For Dg Set For Sound Attenuation Fabricated From 1.6 Mm Crca Sheet Steel ( Structure ) With Side Wall Fabricated From 1.6 Mm Crca Sheet & Filled With Glass Wool ( 96Kg / M3 ) / Foam. As Per Is 8183 The Doors Of 28 / 40 / 50 / 85 Mm Thick As Per Rating And Fabricated From 1.6Mm Crca Sheet Packed With Accoustic Material, All Doors / Opening Are Sealed With Neoprene / Epdn Gaskets. The Enclosure Has Built In Fuel Tank, With Protection And Tripping Of Dg Set Against Temperature Of More Than 50 Degree Centigrade , D. Electronic / Mechanical Governor, Manual & Electric Start , Batteries With Battry Charger, Engine Instruments Panel, Avm Pads All Controls For Operation Of Dg Set Are From Outside The Enclosure With Dg Control Panel Having Microprocessor Based Genset Monitoring & Control System, Mccb / Acb Of Suitable Rating, Ammeter, Voltmeter, Pf Meter, Frequency Meter, Kwh Meter, Digital Fuel Display Meter, Ind.Lamps Etc. Mounted Inside Enclosure , Visible And Accessible From Outside. The Enclosure Should Be Suitable For Following Capacity Dg Sets And Alternator. Noise Level Shall Be Less Than 75 Db At A Distance Of 1 Mtrs. Duly Certified By Authorised Agency Etc. Complete In All Respect Of Following Capacity : , E. ( A ) Accoustic Glass Wool Wall Thickness Should Not Be Less Then 40Mm And Not Less Then 20Mm Pu Foam Upto Rating 100 Kva. ( B ) .Accoustic Glass Wool Wall Thickness Should Not Be Less Then 65Mm And Not Less Then 50Mm Pu Foam Upto Rating 250 Kva. ( C ) Accoustic Glass Wool Wall Thickness Should Not Be Less Then 100Mm For Rating Above 250 Kva. , F. First Filling Of The Fuel Tank Shall Be Done By Contractor And The Prevailing Fuel Cost At That Time Shall Be Reimbursed To The Contactor By Department. , G. Servicing Of The Dg Set ( As Per Oem Guidelines ) During The Dlp Period Shall Be Done By Contractor Including All Consumables, Actual Charges Shall Be Reimbursed To The Contractor By Department / Client Complete In All Respect. , H. Oem Must Have Bis Certificate And & Shall Have Submit Nabl / Cpri / Erda / Cpcb Standards Approved Lab Type Test Reports Before Execution As Required Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr . , Air Cooled & Naturally Aspirated ( With Axial Flow Fan ) , 30 Kva At 0.8 Pf 415V 50Hz 3-? , 75 / 80 Kva At 0.8 Pf 415V 50Hz 3-Ø , Providing & Fixing Of Iso Certified Company Made On Load Change Over Switch, Front Handle Operated, Four Pole 415 V As Per Pwd Specification For Electrical Works Conforming To Is / Lec 60947-3 : 1999 Including Connections , Testing Etc. As Required .In The Following Rating. Appropriate Type Test Certificate / Oem Test Report Shall Be Submitted . All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr . , With Sheet Steel Enclosure Made Out From Crca Sheet Door 1.2Mm & Body 1.6Mm, Powder Quoted, Door Locking System Allow Opening Of Door In Off Position Only With 2 External Earthing Point , 63 A , 200 A , Ms ( Iron Steel ) Misc. Items ( For Making One Trolly For Dg Sets Including All Items & Labour & Must Be Of Suitable Load Capacity Of Dg Set ( Except Tyres & Rims Of Trolly ) Including Tow Hook ) , Providing & Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed UnArmoured / Armoured Aluminium Cable Of 1.1 Kv Grade As Per Pwd Specification For Electrical Works In Existing Rcc / Hume / Stoneware / Pvc Pipe / Open Duct / Cable Trench With Filling Of Excavated Earth In Trench , On Existing Cable Trays Or On Surface Etc. Including Making Necessary Connection, Testing Etc. As Required Of Size And As Per Points ( A ) , ( B ) , ( C ) , Mentioned Below:- , ( A ) Material :- H4- Grade Aluminium Conductor Of Purity >99.6 % & As Per Is:1554 P-I / Is :7098 P – I , ( B ) Conductor Shall Have Electrolytic Aluminium Confirming To Is 8130, Is 3975-1999 For Armouring Of Cables In Armoured Cable Items , Is 5831 For Sheath, Is 10810 ( Part 0 To 64 ) For Testing Procedures. , ( C ) Oem Must Have Iso 9001 & 14001 Certifications For Quality Assuarance & Its Own In House Nabl Lab Setup For All Testing Facilities For Cables . Appropriate Type Test Certificate / Oem Test Report Shall Be Submitted . All Above As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr. , Armoured Cable , 50.0 Sq. Mm , 3.5 Core , 185.0 Sq. Mm , 3.5 Core , Supplying And Making One End Termination With Heavy Duty Brass Compression Gland ( As Per Is 12943- 1990 ) Sibg Type, Heavy Duty Aluminium Lugs ( As Per Is 8309 -1993 & Is 8337-1976 ) Duly Crimped With Crimping Tool, Pvc Tape As Per Pwd Specification For Electrical Works Etc For Following Size Of Armoured Pvc Insulated & Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1100 Volt Grade As Required Of Size. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work , Refer Annexure A Attached With This Bsr . , 3.5 X 50.0 Sq.Mm , 3.5 X 185.0 Sq.Mm , Tyre And Rim Set For Trolly ( With 2 Year Warrenty And 16 Inch Tyre Tubeless And Suitable Rims Size Must Be Purchased From Authorised Service Center Like Mahindra Tata Etc And Bill Of Authorise Purchase Must Be Submited And Bill Amount Of Authorised Dealer To Be Paid. This Rate Is Approx & Not Gurrented To Be Paid This Full Amount )
