Military Engineer Services-MES has published Tender For Provn Of Addition / Augmentation Of Sewage Sump And Pump House Location At Mh, Gate No. 1 And Central Sewage At Panagarh Mil Stn. Submission Date for this Tender is 15-07-2023. Pump House Construction Tenders in panagarh West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-07-2023 |
| Sl. No. | Item Description |
| 1 | B/R PORTION |
| 2 | Excavation in trenches n exc 1.5m deep and n exc 1.5m in wide trenches incl getting out in soft/loosesoil, complete all as specified and as directed. |
| 3 | All as per Item No. 1.001 but depth exc 1.5mbut n.exc 3.0m deep, complete all as specified and as directed. |
| 4 | All as per Item No. 1.001 but depth exc 3.0m but n.exc 4.50m deep, complete all as specified and as directed. |
| 5 | All as per Item No. 1.001 but depth exc 4.50m but n.exc 6.00m deep, complete all as specified and as directed. |
| 6 | M&L fly ash brick work with sold sizebricks straight or curved on plan exc 6m mean radius on plan built in CM 1:4, complete all as specified and as directed. |
| 7 | M&L for PCC 1:4:8 type D-2 (40 mm gr agg) as in fdn filling and mass conc, complete all as specified and as directed. |
| 8 | Removing excavated material n-exc 50m and deposited where directed at alevel n-exc 1.5m above the starting point, complete all as specified and as directed. |
| 9 | Returning, filling in soft/loose soil in including , levelling watering and well raming in layers not exc 25cm, complete all as specified and as directed. |
| 10 | Cutting in to existing man hole /septing tank/soakge wellof internal dia of pipe 150mm for connecting new line and macking good for pipe and joint cement concrete, complete all as specified and as directed. |
| 11 | M&L Reinforced concrete pipe ,300mm dia class NP-2 laid and jointed with collars, complete all as specified and as directed. |
| 12 | M&L cement concret 1:3:6 type C-2 concreet bed to drain pipes 300mmdia includind packing under ,and hunching against the side of pipes after they are laid and tested, complete all as specified and as directed. |
| 13 | M&L hard corebroken booulders of stonegauge n-exc 63mm deposited ,spread and levelled in layers n-exc 15cm thick water and rammered to true surface, complete all as specified and as directed. |
| 14 | M&L for sand filling under floor / side of walls/ foundation including watering and consolidation, complete all as specified and as directed. |
| 15 | M&L PCC (1:4:8) type D-2, 100 mm thick using 40 mm graded aggregate as sub base, complete all as specified and as directed. |
| 16 | M&L Non- skid cermic coloured tiles 7 to 8mm thick (squre/rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement sluury and pointed in white and coloured cementmatch complete all as specified over screed bed or bedding layerof mortar 15mm thick in CM 1:6, complete all as specified and as directed. |
| 17 | M&L Non- skid cermic coloured tiles 7 to 8mm thick (squre/rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement sluury and pointed in white and coloured cement to match complete all as specified over screed bed or bedding layerof mortar 15mm thick in CM 1:6, complete all as specified and as directed. |
| 18 | M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete over 10mm thick in CM 1:3, complete all as specified and as directed. |
| 19 | S&F 30 mm flush shutter core construction, with black board core and ply wood face pannel commercial type on both side, complete all as specified and as directed. |
| 20 | S&F steel window with side hunge shutters including projection type hinges with steel handle ,and steel peg staycomplete wiyh glazing bar, complete all as specified and as directed. |
| 21 | M&L solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC foam sheet meter cut to two corner and jointed with 2 nos of 1500mm long bracket of 15x15 squre tube .the two vertical door profile are to be reinforced with 19x19mmsqure tube of 19 gauge EPDM rubber gascut weather seal to be provided through out the frame frame shall be fixed to wall using65x100mm long ms screw through the frame by usingPVC fasterner (inchold fast)and minium of 4 nos of screw to be provided for each vertical member & 2 nos for horizontal, complete all as specified and as directed as per drawing. |
| 22 | M&L for Factory made solid PVC door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised paneel design with 2mm thick moulded prelamPVC sheet on the front face and 2mm plain colour PVCsheet on back face and moulded plain colour PVC "c" chanel having PV C sheet for top rail ,lock rail & bottom rail panneling, supply and fixing in the frame at site as per specification, complete all as specified and as directed. |
| 23 | M&L cutting holes in brick walls for inserting hold fast and macking good dismantled portion in cement portion in cement concret 1:2:4 type B-1 Exc halfbrick thick walls built in cement motar, complete all as specified and as directed. |
| 24 | S&F Aluminium anodisedsliding door bolt in size 250mm, complete all as specified and as directed. |
| 25 | S&F Aluminium anodisedbarrel tower bolt of extruded section 150mm long, complete all as specified and as directed. |
| 26 | S&F Aluminiumhandle fabricated type 150mm long of approved design, shape and make, complete all as specified and as directed. |
| 27 | S&Fbutt hinges medium weightof size 100mm, complete all as specified and as directed. |
| 28 | S & F hydraulic door closer aluminium extrudedsection bodydesiganation No-3 universal type ,suitable door shutter width and waight between 61kg to 80kg of approved make, fixed with screws, complete all as specified and as directed. |
| 29 | M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed. |
| 30 | S&F II class HW plain solid straight chowkat and frame wrought ,framed rebated on solid rounded or chamfered put toghter with glue pinned at joints, complete all as specified and as directed. |
| 31 | S&F 3mm thick glass sheet ordinary qualityglazing with in square, n exc 0.5 Sqm in each pane, fixed to ventelat, complete all as specified and as directed. |
| 32 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 33 | S&F vitreous chaina squating pan orissa parten size 580x 440mm white with integral foot rest (excluding flushing cisten and flush pipe), complete all as specified and as directed. |
| 34 | S&F PVC low level flushing cisternincluding brackets 10 litre capacity COMMANDER/SLIM LINE, with inlet ball valve float, handle,flush pipe etc., complete all as specified and as directed. |
| 35 | S&F pillar taps fancy type 15mm bore of pipe cast copper alloy with capstain heads chromium plated screwed down high pressure" with long screwed shank and fly nuts screwed for iron pipe, complete all as specified and as directed. |
| 36 | S&F Bib taps, cast copper alloy with handle, chromium plated fancy type, short body with wall flange screwed down, suitable for 15 mm bore pipe, complete all as specified and as directed. |
| 37 | M&L cast iron Floortrap 100mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), complete all as specified and as directed. |
| 38 | S&F Stainless steel Soap dish fancy type, complete all as specified and as directed. |
| 39 | Supplying and fixing in lookingMirror of 600x 45omm beleved edge mirror of selected quality glass mounted on 04 Nos stain less stee studswith chromium plated brass screwd, complete all as specified and as directed. |
| 40 | S&F PVCconnection 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed. |
| 41 | M&L viterious chainawash hand basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts and waste pipe, complete all as specified and as directed. |
| 42 | S&F galvanised medium grade steel tubing 15mm bore with all fittings fixed with walls, complete all as specified and as directed. |
| 43 | S&F Gun metal , 15mm globe or gate valve with iorn wheel head both ends for iorn pipe fixed, complete all as specified and as directed. |
| 44 | S&F stop valve cast copper alloy 15mm bore screw down high presure with cruth fixed in iorn pipe, complete all as specified and as directed. |
| 45 | S&F swivel shower of PTMT any colour for fixing with 15mm pipe and arm 15mm size 195mm long with 45 degree bend with flange, complete all as specified and as directed. |
| 46 | S&FStainless steel towel rail 20mm dia D type solid 60cm long between flanges of approved make and pattern, fixed to walls with screws, complete all as specified and as directed. |
| 47 | M&L for 10mm dia and overTMT Steel bar cut to length bent to shape reqd incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 48 | All as per Item No. 1.046 here-in-before but 6 to 8mm dia, complete all as specified and as directed. |
| 49 | All as per Item No. 1.046 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed. |
| 50 | M&L for Form work to soffits of suspended slabs such as roof ,floor s slab landing and similar work n-exc 200mm thick (horizontal or sloping) of fiar finshed surfacs ofconcret surface, complete all as specified and as directed. |
| 51 | M&L15mm thick plastering in cement & sand mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed. |
| 52 | M&L Rendering 15 mm thickon other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified and as directed. |
| 53 | M&l preparing surface of new plastersurface on ceilling threecoat of white wash, complete all as specified and as directed. |
| 54 | M&L chequred cement concret tile 300X300X25mm thick set and jointed and pointed in neat cement slurry in floor with gray cement and pigment including over screed bed 15mm thick in cm 1:4, complete all as specified and as directed. |
| 55 | M&L 75mm thick cement concret 1:3:6type C1 using40mm graded aggregateas inplinth protection 75cm wide finished even and smooth without using extra cement, complete all as specified and as directed. |
| 56 | M&L Precast RCC type B1 1:2;4 (20mm graded aggregate) as in cover slab for man hole and similar article with plain face in cm 1:4, complete all as specified and as directed. |
| 57 | M&L Reinforced concrete pipe ,150mm dia class NP-2 laid and jointed, complete all as specified and as directed. |
| 58 | M&L cement concret 1:3:6 type C-2 concreet bed to drain pipes 150mm dia includind packing under ,and hunching against the side of pipes after they are laid and tested, complete all as specified and as directed. |
| 59 | Excavation in post hole each not exc 0.5 cum getting out returning, filling and ramming earth or broken rubble mixed into earth around in layers nexc 25 cm watering and removing surplus soil to a distance n. exc 50 m and making surfaces good in soft/loose soil, complete all as specified and as directed. |
| 60 | S&F galvanised twostrand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any standardral straining bolt including securing or tying at rossing with an provision of galvanised stell pin etc., complete all as specified and as directed. |
| 61 | S & F mild steel angle and flat iron section fixed independently with out connecting plate of Fe-410-W (Gde-E-250) quality -B, complete all as specified and as directed. |
| 62 | S&F MSscrew bolt (machine made) with square heads at one end and screwed the other 10 mm dia exc 5 cm but n.exc 10 cm long, complete all as specified and as directed. |
| 63 | M&L preparation of new steel surfaces and apply two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm width or girth, complete all as specified and as directed. |
| 64 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade using with grey cement and pigment, complete all as specified and as directed. |
| 65 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out IN ALL TYPE OF SOILS and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed. NOTES FOR ITEM NO. 1.064 TO 1.070 : Bailing out, Pumping out or otherwise removing all water which may accumulate in the excavation complete all as specified and directed by Engr-in-Charge. |
| 66 | All as per Item No. 1.064 here-in-before depth exc. 1.5m but n.exc 3.0m deep, complete all as specified and as directed. |
| 67 | All as per Item No. 1.065 here-in-before depth exc. 3.0m but n.exc 4.50m deep, complete all as specified and as directed. |
| 68 | All as per Item No. 1.066 here-in-before depth exc. 4.5m but n.exc 6.0m deep, complete all as specified and as directed. |
| 69 | All as per Item No. 1.067 here-in-before depth exc. 6.0m but n.exc 7.5m deep, complete all as specified and as directed. |
| 70 | All as per Item No. 1.068 here-in-before depth exc. 7.5m but n.exc 9.0 m deep, complete all as specified and as directed. |
| 71 | All as per Item No. 1.069 here-in-before depth exc. 9.0m but n.exc 10.5 m deep, complete all as specified and as directed. |
| 72 | M&L for Use and waste of timbering as planking and strutting for excavationsin shafts, wells, cesspits, manholes and pier holesINsoil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal depth n.exc 1.5 m, complete all as specified and as directed. |
| 73 | M&L for Use and waste of timbering as planking and strutting for excavationsin shafts, wells, cesspits, manholes and pier holesin soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal depth exc 1.5 but n.exc 3m, complete all as specified and as directed. |
| 74 | M&L for Use and waste of timbering as planking and strutting for excavations inin shafts, wells, cesspits, manholes and pier holesin soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal depth exc 3.0 but n.exc 5.0m, complete all as specified and as directed. |
| 75 | M&L for Use and waste of timbering as planking and strutting for excavations inin shafts, wells, cesspits, manholes and pier holesin soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal depth exc 5.0m but n.exc 7.0m, complete all as specified and as directed. |
| 76 | M&L for Use and waste of timbering as planking and strutting for excavations in in shafts, wells, cesspits, manholes and pier holesin soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal depth exc 7.0m but n.exc 9.0m, complete all as specified and as directed. |
| 77 | M&L for Use and waste of timbering as planking and strutting for excavations inin shafts, wells, cesspits, manholes and pier holesin soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal depth exc 7.50 mbut n.exc 9.0m, complete all as specified and as directed. |
| 78 | M&L for Use and waste of timbering as planking and strutting for excavations inin shafts, wells, cesspits, manholes and pier holesin soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal depth exc 9.0m but n.exc 10.5m, complete all as specified and as directed. |
| 79 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed. |
| 80 | M&L for PCC 1:3:6type C-2using 40 mm graded stoneaggregateas in fdn filling and mass conc, complete all as specified and as directed. |
| 81 | M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in flooring finished even and smooth with using extra cement, complete all as specified and as directed. |
| 82 | M&L for RCCM-40 designmixusing 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc., complete all as specified and as directed. |
| 83 | M&L for RCCM-40 designmixusing 20mm graded stone aggregate as in slab supported on roof, etc.,complete all as specified and as directed. |
| 84 | M&L for RCCM-40 designmixusing 20mm graded stone aggregate as in beam ,cantileverchajja etc., complete all as specified and as directed. |
| 85 | M&L for RCC M-40 designmixusing 20mm graded stone aggregate as on column ,piller ,pier ,post and struts etc., complete all as specified and as directed. |
| 86 | M&L for RCC M-40 designmixusing 20mm graded stone aggregate as in walls etc., complete all as specified and as directed. |
| 87 | M&L for RCC M-40 design mix using 20mm graded stone aggregate as in stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings, complete all as specified and as directed. |
| 88 | M&L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams for rough finished surfaces of concrete, complete all as specified and as directed. |
| 89 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. for orugh finished surfaces of concrete, complete all as specified and as directed. |
| 90 | M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished surfaces of concrete, complete all as specified and as directed. |
| 91 | M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete, complete all as specified and as directed. |
| 92 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 93 | M&L 20mm thick plastering in cement & sand mortar 1:4 on fair faces of brick work or concrete surfaces, finished even andsmooth with out using extra cement finished plaster, complete all as specified and as directed. |
| 94 | M&L Rendering 5 mm thickon other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:3), complete all as specified and as directed. |
| 95 | S&FSteel ventilators with sidehung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and as directed. |
| 96 | M&L for Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. grade FE 410-W (Grade E-215) complete, complete all as specified and as directed. |
| 97 | M&L for Preparation of new plastered surface of walls andfinishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and as directed. |
| 98 | M&Lfor applying three coat of white wash onnew wall surfaces including preparation, complete all as specified and as directed. |
| 99 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and as directed. |
| 100 | M&L for 0.8mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and as directed. |
| 101 | M&L Reinforced concrete pipe ,450mm dia class NP-2 laid and jointed with collars, complete all as specified and as directed. |
| 102 | M&L Cement concret 1:3:6 type C-2 concreet bed to drain pipes 450mmdia includind packing under ,and hunching against the side of pipes after they are laid and tested, complete all as specified and as directed. |
| 103 | M&L for RCC M-25Design mixusing 20mm graded stone aggregade) as Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc, complete all as specified and as directed. |
| 104 | M&L for RCC M-25Design mixusing 20mm graded stone aggregade) as in slab supported on roof, etc, complete all as specified and as directed. |
| 105 | M&L for RCC M-25 Design mixusing 20mm graded stone aggregade)as on beam ,cantileverchajja etc., complete all as specified and as directed. |
| 106 | M&L for RCC M-25 Design mixusing 20mm graded stone aggregade)as on column ,piller ,pier ,post and struts etc., complete all as specified and as directed. |
| 107 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaceson walls on new plastered surface incl preparing new surface, complete all as specified and as directed. |
| 108 | S&F Mild steel angle iron as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters,nosingtosteps includingembedinginconcrete and screwing etc. wind ties for roofincluding securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 109 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil, complete all as specified and as directed. |
| 110 | M & L for rendering 10 mm thick on fair faces of roof surfaces or concrete surface in CM (1:4) using with WPC, complete all as specified and as directed. Note : WPC shall be measured and paid seperately. |
| 111 | Supply only integral water proofing compound, complete all as specified and as directed. |
| 112 | M & L for preparation of new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including one coat of self priming primer @ one litre per 10 Sqm with reinforcing fabric sheet as per manufacturer"s instructions to stop leakage/seepage from roof/wall, complete all as specified and as directed by the Engr-in-Charge. Notes : (i) As per description of this item, minimum two coats of Polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out as per manufacturer"s instruction. Please note no price adjustment shall be made, if as per manufacturer"s instructions more coats of Polyurethane (PU) acrylic based water proofing liquid compound and primer are required for roof treatment. (ii) Quoted Rate shall be deemed to be included for work in building/structure of any height. |
| 113 | Supply, lowering, fixing ,commissioning and testing for 35 HP,415 Volts, 50 Hz, three Phase, AC supply, Non clogging vertical submersible sewage pump set of minimum discharge capacity 2100 LPM at 22 mtr head. Pump set consist of chrome streel impeller with flange discharge of 150 mm bore of 1450 rpm, soilid handing size 40 mm to 100 mm and electric motor consist of submersible Dry type with "F" classs insulation, fitted with double mechanical seal, suitable for 414 Volt+/- 10% volts , three phase , 50 Hz AC supply and other connected accessories complete all as per specified and directed including sewage pump base with connected accessories and foundation bolt of requied size (as per manufatured instruction) and testing, complete as specified and as directed by Engrs-in-Charge. Supply and Fixing of the following connected items of above Submersible sewage pump of 35HP capacity. Note : (Rates of ser no (i) to (iv) are included in quoted rate.) (i) Supply and fixing Guide rail pipes (size as per OEM specification): Length- 8 mtr (ii) Supply and fixing Lifting chain (C.S) with Shackle : Length-20 Mtr (iii) Supply amd fixing Auto coupling unit(size as per OEM specification)-01 Each Set (iv) PVC insulated double Shealted flexible Copper with proction conductor cable 1 x 10 core x 10 sqmm - 15 mtr. (v) Control Panel (S/D) consist of relay, contactor on/off switch, digital voltmeter and ammeter suitable for 35 HP motor. |
| 114 | Supply, lowering, fixing ,commissioning and testing for 30 HP,415 Volts, 50 Hz, three Phase, AC supply, Non clogging vertical submersible sewage pump set of minimum discharge capacity 1800 LPM at 22 mtr head. Pump set consist of chrome streel impeller with flange discharge of 150 mm bore of 1450 rpm, soilid handing size 40 mm to 100 mm and electric motor consist of submersible Dry type with "F" classs insulation, fitted with double mechanical seal, suitable for 414 Volt+/- 10% volts , three phase , 50 Hz AC supply and other connected accessories complete all as per specified and directed including sewage pump base with connected accessories and foundation bolt of requied size (as per manufatured instruction ) and testing, complete as specified and as directed by Engr-in-Charge. Supply and Fixing of the following connected items of above Submersible sewage pump of 35HP capacity. Note : (Rates of ser no (i) to (iv) are included in quoted rate.) (i)Supply and fixing Guide rail pipes (size as per OEM specification): Length- 8 mtr (ii) Supply and fixing Lifting chain (C.S) with Shackle : Length-20 Mtr (iii)Supply amd fixing Auto coupling unit(size as per OEM specification)-01 Each Set (iv)PVC insulated double Shealted flexible Copper with proction conductor cable 1 x 10 core x 10 sqmm - 15 mtr. (v) Control Panel (S/D) consist of relay, contactor on/off switch, digital voltmeter and ammeter suitable for 30 HP motor. |
| 115 | Supply, lowering and fixing MS heavy grade column pipe 150 mm dia (3 mtr long) both side flanged (using MS flange) heavy grade MS pipe inculuding nuts, bolts, gasket and washers, complete all as specified and as directed. |
| 116 | Supply and fixing DI Pipe 250 mm bore with spigot and socket end rubber gasket joint (titan) centrifugally cast class k-7 conforming to IS 8329-2000 laid in trenches/ on surface/ over masonry pillar inculuding nuts, bolts,gasket and washers, complete all as specified and as directed. |
| 117 | Supply and fixing, cast iron sluice valve of 150 mm bore, class PN 1.6 duly ISI Marked, (conforming to IS -14846-2000) with iron wheel head both end flanged , stainless steel spindle , non rising type complete with Neoprene rubber gasket, nut bolts and washer etc., complete all as specified and as directed. |
| 118 | Supply and fixing, cast iron sluice valve of 250 mm bore, class PN 1.6 duly ISI Marked, (conforming to IS -14846-2000) with iron wheel head both end flanged , stainless steel spindle , non rising type complete with Neoprene rubber gasket, nut bolts and washer etc., complete all as specified and as directed. |
| 119 | Supply and fixing, connecting and testing reflux valve(non return valve IS -5312) CI suitable for 150 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with joint with rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers, complete all as specified and as directed. |
| 120 | M&L DI bend any type, radius and angles, tappers and type (straight, bend, increasing, decreasing, or double socket etc. Tee pipes single branch Y junction, double branch cross (all socket, socket and Spigot or flanged ends) collors, caps and plugs for the Pipes socket and Spigot. All socket and flanged upto bore of 250 mm, complete all as specified and as directed. Note : Lead/gasket forfitting shall be measured and paid separately. |
| 121 | Supply, installation, testing and commissioning complete of manufacture or OEM manufactured, static silent(sound proof enclosure) Diesel engine driven generating setof capacity60 KW (75 KVA), with automatic control panel (AMF Panel), coolant/water cooled, 415 Volts (AC three phase, 4 wire system of supply) 50 HZ at power factor 0.8 minimum. The DG set consists of Diesel Engine coupled to a matching alternator, through flexible coupling and mounted on common base frame and Complete with Automatic control panel(AMF Panel), fuel tank with mounting arrangement and inlet, outlet return inlet oil arrangement, exhaust pipe complete including PCC foundation of suitable size having at least 0.5 M height , anti vibration pads, including all features to comply with latest CPCB guidelines and comprising of Item 1.119 and 1.120, complete all as specified and as directed by Engrs-in-Charge. |
| 122 | Item 1.120 continued... (i) ENGINE (Prime Mover) : Diesel Engine 1500RPM direct injection, multi cylinders, four stroke, conforming to ISO3046/BS 5514, water cooled, naturally turbo charged, capable of giving adequate BHP to drive Alternator capable of delivering 60KW(75 KVA) at outdoor atmospheric conditions, Battery 12 Volt with terminals (as per manufaturer recommendations) complete with fly wheel all standard fittings/fixture as per manufacture and including suitable panel with tachometer , lub oil, temperature, pressure gauge and frequency meters and also including self stater system with electronic governor and engine protection system (Shut down, High water temperature, low lub oil, oil pressure, over speed etc) fuel tank and frist fill of lub oil and other consumables etc and self starting system incl batteries etc complete. (ii) Alternator : Brushless AC alternator, 3 Phase, 415Volt, 4 wire, rated for output of 60KW/75KVA, minimum power factor 0.8, 1500 RPM, IP 23 Protection classenclosure, insultion Class "H", salient pole, revolving field, single bearing automatic voltage regulator coupled through flexible coupling with and to match the above engine. (iii) Base Plate : made out of strutural steel as per manufacturers recommended design/specifications. (iv) Acoustic Enclosure : Sheet metal fabricated cope type silent enclosure manufactured on CNC machines as per CPCB norms and powder coated after seven tank process, the enclosure shall be designed for reducing the sound level to 75 dB (A) at distance of 1 Mwhen DG set is working at full load along with testing conformance. (v) Foundation /Plinth/Base : Shall be provided as per manufacutrers recommendations, however minimum 0.5 m Space should be available all around the set and height of plinth shall not be less than 0.5 m. |
| 123 | Item 1.120 continued... (vi) Diesel storage tank of capacity adequate for storage of diesel for 12 hours operation of Gen set. (Misc Tool kit, Operation and Maintenance catalogue spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices.) (vii) AMF control panel : The AMF control pannel shall be made of 16 SWG CRCA Sheet , floor mounted , indoor type, dust and vermi proof, powder coated and suitable for 230V 50Hz System. The panel shall consist os the following features. (a) Microprocessor based AMF controller having safety features with display of tfollowing engine & alternator parameters. (b) Engine Display Features : Low lube oil pressure, High water temperature, over speed , low fuel level, RPM, No of Hrs run , Battery Voltage. (c) Saftey Features : LLOP, HWT, LFL, Overspeed. (d) Alternator Display Features: Ampere, voltage, frequency, Power Factor, KW, KWh, KVAR. (e) Safety features : Overcurrent ,over/under voltage, under frequency, short circuits (vi) Current Transformer of suitable ratio. (f) 2 No. of suitably rated power contactors for DG and mains. (g) 2 No. of suitably rated MCCB with short circuit and overload protection for DG and mains. (h) Indicating lamps for DG ON/Load ON /Mains ON. (j) Earth studs (k) Engine start/stop push button(Available in Controller). (l)Battery Charger with auto tickle and Boost Charging facility. (m)Selector switch for control ON/OFF. (n) Hooter. |
| 124 | Material and Labour for constrution of valves pit chamber of size (1200 mm x 1200 mm x 900 mm, internal )using PCC (1:4:8) 40 mm graded stone aggregate for foundation 15 cm thick , 23 cm thick wall in CM (1:4) 10 mm thick rendering all around the brick work with 1:6 cement motar PCC (1:2:4) type B1 coping with 20 mm graded agregate for grouting MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement MS frameof 3.15 mm thick plate made out of 40 x 40x 5 mm thick angle iron including paintaing of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer finishing coat including necessary excavation in any type of soil, returing filling in and removal of surplus soil to adistance not exceeding 50 mtrs, complete all as specifie and as directed. |
| 125 | M&L brick work in cum (1:6) as brick pillar for supporting of DI pipe line, complete all as specifie and as directed. |
| 126 | M&L 15 mm thick cement plaster in cum (1:6) on brick surface fair and even, complete all as specifie and as directed. |
| 127 | M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation of pillar, complete all as specifie and as directed. |
| 128 | Supply and fixing 500 ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top with three layered) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting, complete all as specifie and as directed. |
| 129 | Supply and fixing of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut, complete all as specifie and as directed. |
| 130 | M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe, complete all as specifie and as directed. |
| 131 | M&L 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar andconnectionincluding fittinglike socket /Union/Tee/Reducer Nipple etc., complete all as specifie and as directed. Note : All fittings will be supplied by Contractor. Rate for the same is included in the item rate quoted. |
| 132 | M&L 50 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar andconnectionincluding fittinglike socket /Union/Tee/Reducer Nipple etc., complete all as specified and as directed. Note : All fittings will be supplied by Contractor. Rate for the same is included in the item rate quoted. |
| 133 | E/M PORTION |
| 134 | Supply, laying / fixing / connecting, testing and commissioning of 95 Sqmm 3.5 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured,electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct), complete all as specified and as directed by the Engr-in-Charge. Note : Excavation, sand cushioning, brick will be measured and paid separtely. |
| 135 | Supply, laying / fixing / connecting, testing and commissioning of 10 Sqmm 2 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured,electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct), complete all as specified and as directed by the Engr-in-Charge. Note : Excavation, sand cushioning, brick will be measured and paid separtely. |
| 136 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting outincluding trimming the sides and forming bottom surfaces to required levels in soft/loose soil, complete all as specified and directed. |
| 137 | Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed. |
| 138 | Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed. |
| 139 | Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling, complete all as specified and as directed. Note : Punned thickness 18 cm shall only be considered for payment. |
| 140 | Supply and lay in trenches fly ash bricks, for cable protection, complete all as specified and as directed by Engr-in-Charge. |
| 141 | Supply and fix Pipes galvanized,80 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement, complete all as specified and directed. |
| 142 | Material and labour for earthing complete with galvanised mild steel earth plate electrode 600 mm x 600 mm x 6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased inand including 40 mm dia GI "lightgrade" pipe from upper end of earth plate upto equipments,20 dia bore GI pipe "light grade" as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe andPCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS TMT bars 8mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part-I, complete all as specified and directed and testing on completion. |
| 143 | Supply, commissioning and testing cubical housing cabinet type, weather proof, outdoor type of suitable size, CPRI approved, factory made LT Panel boad, totally enclosed, dust and vermin proof openable from front & back side, canopy headed, connected with suitable size MS angle iron frame,Overall dimension suitable to operate submersible pump, fabricated with CRCA sheet 3.15mm thick sheet including IP - 55 protection, installed on concrete base made of PCC (1:3:6) type C1 using 20mm graded aggregate,including self locking arragement. Panel board shall comprise of :- (a)Copper Busbar rating- 300 Amps- 04 Nos (b)Indication lamp for RYB - 01 Set (c)MCCB-200 Amp, 4 pole, 35KA fixed thermal and magnetic settig, 415 V, 50 Hz AC-01 No(incoming) (d) MCCB-125 Amp, 4 pole, 25KA fixed thermal and magnetic settig, 415 V, 50 Hz AC - 02 No (Outgoing for pump) (e) MCB-40 Amp, 4 pole, 16KA f415 V, 50 Hz AC-02 Nos (Outgoing for 01 Pump house bldg & 01for Spare) (f) Fully Automatic Star delta Starter in sheet Enclosure Type MNMotor rating AC-3,Duty 415v, 50 Hz 3 Phase to 50 HP,Relay range of 30-63 A.- 02 Nos Make: L&T/Schneder/GE (g) Change over switch 200 Amps 4 pole - 01 Nos (h)S&F digital ampere meter 31/2 display incl CT having CTR 200/5-01 Nos (j) S & F digital voltmeter 0-500 V= 01 Nos |
| 144 | Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one wayswitch using1.5 sqmm nominal cross sectional areamultistrandedcopper conductor ,PVC insulated unsheathedFR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked)fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRPVC insulated unsheathed earth wire and connecting to earth dolly andbrass screws, washers etc., complete all as specified and as directed. |
| 145 | All as per Item No. 2.11 here-in-before but One 3 pin 5 Amps socket out let points on independent board, complete all as specified and as directed. |
| 146 | Material and labour wiring for 15 Amps socket out let on independent Boardscontrolled by one, one wayswitch using4.0 sqmm nominal cross sectional areamultistrandedcopper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, includingpressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked)fitted with Chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly andbrass screws, washers etc., complete all as specified and as directed. |
| 147 | Supply and fixed switch piano flush type, single pole , 6 Amps, one way, complete all as specified and as directed. |
| 148 | Supply and fixed switch socket combination 2 in 1 multipurpose5 pin , (6 Amps) flush typecontrolled by one switch, complete all as specified and as directed. |
| 149 | Supply and fixed switch socket combination2 in 1 , 6 pin , (16 Amps ) flush typecontrolled by one switch, complete all as specified and as directed. |
| 150 | Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps, complete all as specified and as directed. |
| 151 | Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings, complete all as specified and as directed. |
| 152 | Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked, complete all as specified and as directed. |
| 153 | Supply and fixed 18 W LED light fitting wall mounted batten 4"ft ,minimumm lumen output 100 lumen/Wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection, complete all as specified and as directed. |
| 154 | Supply and fixing 25 watt LED Bldg light fittings complete all as described here-in-below :- (i) Total system lumen not less than 2750 lumens. (ii) High pressure die cast aluminium. (iii) IP rating :- IP 66 (iv) Front cover : Toughened Clear glass. (v) Mounting :- Suitable for bracket arm 25 mm dia 1.0 m long (vi) Finish :- Epoxy powder coated with any additional treatment for smooth and anti corrisive finish. (vii) Lamp :- High bright LED with Lens. (viii) System efficacy (lm/W) of the luminaries :- Not less than 110 lm/watt. (ix) Colour temperature :- Not less than 5700K (x) Colour rendering Index (CRI) Not less than 74 (xi) Life : Not less than 50000 Hrs of opreation (xii) Optices :- Spread (Beam angle along the driveway)- 120degree, Through( Beam angle across the drive wat)- 60 degree, Beam pattern - Asymmetical driveway (xiii) Control gear:- Inbuilt electronic driver, PF not less than 0.90 and TDH less than 20% with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection :- Inbuilt surge protection minimum 5 KV (xv) Heat Sink :- As per OEMs design. |
| 155 | Supply and fixed epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 230 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact, complete all as specified and as directed. |
| 156 | Supply and fixed MCB SP,6 to 32 Amps, "C" series 10kA, 240 Voltsand to be housed in DBs including necessry connection, complete all as specified and as directed. |
| 157 | Supply and fixed MCB SPN 6-32 Amps,"C" series 10kA, 240 Volts and to be housed in DBscomplete including necessry, complete all as specified and as directed. |
| 158 | Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased inand including 40 mm dia GI "lightgrade" pipe from upper end of earth plate upto equipments,20 dia bore GI pipe "light grade" as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe andPCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part-I complete all as specified and directed and testing on completion. |
| 159 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and as directed. |
| 160 | Supply & fixing metallic Exhaust ventilation fan of sweep 300 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with rwin core twisted flexible copper conductor (23/0.0076) of size, complete all as specified and as directed. |
| 161 | Supply and fixing LED Bulb 15 watt, ISI marked, suitable for batten holder, complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
