Tender For Art Work At S Nanak Singh Kochar Gaya Dobhi Bihar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Jun 2023
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dobhi → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Art Work At S Nanak Singh Kochar Gaya Dobhi Bihar Providing Art Works At Heritage Ro At M/S S Nanak Singh Kochar (A Site Ro) On Nh -2, Dobhi, Gaya, Bihar Under Bihar State Office. => Limited
BOQ
| Sl. No. | Item Description |
| 1 | Art Work for Heritage Site |
| 2 | Design, supply and installation of 2.0 m -3.0 meter height craft work of Material FRP/Metal to be fixed on stone/Brick masonary arch boundary wall in various shapes as per your design Nishaan Saheb, Jal Mandir, Nalanda University fixing of art work on wall to be provided by vendor. Final design shall be approved by IOC before putting the art work at site. Brick masonary wall or RCC support wall shall be paid seperately. |
| 3 | Design, supply and installation crafted Column/ Pliiar to be used as cladding of FRP materialto cover the mild steel canopy columns. 5.5 m - 6.0 m ht each approx. Full Circle cross section with all necessary supports. Final design shall be approved by IOC before putting the art work at site. |
| 4 | Design, supply and installation Crafted Column/ Pliiar to be used as cladding to cover the RCC columns of Sales Building 3 m ht each approx. Half Circle cross section with all necessary supports. Final design shall be approved by IOC before putting the art work at site. |
| 5 | Design, supply and installation of 5M-6M High Crafted Pillar of Ashoka Stambh (with mounting of single lion as per Vasihali Ashoka Pillar) of FRP material with metal frame inside to support the full ht of Ashoka Pillar. Final design shall be approved by IOC before putting the art work at site. |
| 6 | Design, supply and installation of approximate size of 1M (Width) X1.2M (Ht.)Carved Railing Design to be installed along the front length of the RO as per IOC scheme in FRP material with steel frame inside. Min thickness 100 mm. Measured length will be horizontal length of arches. Final design shall be approved by IOC before putting the art work at site. |
| 7 | Design, supply and installation of 450 mm height carved ceiling drop to be installed along the length of the canopy on all 4 sides of FRP material. Final design shall be approved by IOC before putting the art work at site. |
| 8 | Design, supply and installation of 300 mm height carved ceiling drop to be installed along the length of the sales building on 3 sides of building as per attached IOCL scheme.Final design shall be approved by IOC before putting the art work at site. |
| 9 | Design, supply and installation of 2m dia size Ashok Chakra as per IOCL scheme of FRP material with metal frame inside for support. Necessary civil foundation shall be paid seperately. Final design shall be approved by IOC before putting the art work at site. |
| 10 | Design, supply and fixing of Digitally Printed using Eco Solvant printing machines and ink Bio Degradable Translucent Fabric showing madhubani painting or other art forms as per IOCL scheme to be installed on Canopy at RO with insatllation mechanism and LED Lighting arrangement. 3 m width and length as per IOCL instruction. MS Tubular section/ structural member as finalized by IOCL shall be paid seperately. Painting scheme shall be finalized by IOCL. Final design shall be approved by IOC before putting the art work at site. Fabric material should be fire retardent. |
| 11 | Design, supply and fixing of Digital Wall Papers.Sales Building Exterior to match the shades of Nalanda Ruins. Final design shall be approved by IOC before putting the art work at site. |
| 12 | Design, supply and fixing of approximate size of 2.5 m -3 m height craft work strucure fabricated on stone/Brick masonary arch boundary wall in various shapes as per IOCL design of Buddha with bodhi tree with warmlighting. Cable shall be paid seperately. Final design shall be approved by IOC before putting the art work at site. |
| 13 | supply and fixing of Art Frames for installing Pictures/ Paintings in Art Gallery in Aluminium finish hanging arrangements and painting - Frames should be of backlit arrangement. Measured area will the outer size of frame. Final design shall be approved by IOC before putting the art work at site. |
| 14 | Design, supply and fixing of artifical thatch roofing on Toilet/Gallery using FRP/WPC/suitable material to match the required shade and color of IOC scheme. Material to be used should be fire retardent. Structural support required to fix the artifical thatching shall be paid seperately. |
| 15 | Painting Works - 3 D Painting Works with all materials and surface prepartion and putty as per IOCL scheme.Plaster to be paid seperately. |
| 16 | Painting Works - Madhubani Paiting Works on wall surface with surface preparation and wall putty. Plaster works to be seperately paid. |
| 17 | Painting Works - High Quality acrylice modified resin based texture of Dholpur/ Red sand stone pattern with anti algae and UV resistance properties to be appled as intermediate finish in desired pattern. |
| 18 | ACM (Alumium Composite Material) Works as per IOCL direction. Thickness of ACM sheet shall be of 3 mm. |
| 19 | Providing and Displaying Foxtail palm well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. |
| 20 | Providing and Displaying Topiary of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 75 cm spread each Ball, 135 to 150 cm ht., in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge. |
| 21 | Providing and Displaying Bamboo Buddha Valley with fresh & healthy 5 to 6 suckers 1.80 m to 2.10m ht umbrella type well developed in 50 cm Cement Pot as per direction of the officer-in-charge. |
| 22 | Providing and Displaying Cycus revoluta specimen , having 45 to 50 fresh and healthy, leaves having 30cm to 35cm circumfrance of base stem well developed in 40 cm challi, as per direction of the officer-in-charge. |
| 23 | Providing and stacking of Washingtonia filifea palm stem ht. 120-135 cm with 8-10 healthy leaves lush green leaves well developed in big size HDPE Bags as per direction of the officer-in-charge. |
| 24 | Supplying & Stacking of Selection No.1 doob grass turf at site fresh & freefrom weeds having proper roots in green including loading, unloading, carriageand all taxes paid etc.and as per direction of officer in charge. |
| 25 | Providing and laying inposition specified grade ofreinforced cement concreteexcludingthecostofcentering,shuttering, finishing and reinforcement - All work up to plinth level |
| 26 | ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm |
| 27 | Providing & Laying Reinforcedcementconcreteworkinwalls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level UP TO FLOOR V LEVEL excluding cost of centering, shuttering, finishing and reinforcement : |
| 28 | ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm |
| 29 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 30 | i) Foundations,footings,bases of columns, etc. for mass concrete |
| 31 | Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels |
| 32 | ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 |
| 33 | Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth |
| 34 | i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand)IN FOUNDATION AND PLINTH |
| 35 | iii) Brick work in Cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure in all shapes & sizes in superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL |
| 36 | Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete. |
| 37 | i) Hot finished welded type tubes |
| 38 | Supply, Fabrication and Erection of Pre Engineered steel structures. |
| 39 | Preparation of fabrication drawings, bill of materials, getting approval from consultant/Client, including supply and factory fabrication of Pre-engineered steel structures such as columns, column bracings, sheeting posts, rafters, roof bracings, struts,roof purlins, side runners,sag angles, sag rods, chequered plates, stair cases, ladder, Anchor bolts (anchor bolts supply by Pre Engineered Beam vendor and fixing shall be carried out by civil contractor) etc and all other structural items as required in case of canopies at ROs. This includes surface prepartion by shot/grit/copper slag blasting to Swedish StandardSA 2½ for painting, supply and application of Painting for structural members as per specifications (Primer coat: Red Oxide Zinc Phosphate Primer (P3), DFT 60-70 µm (2 coats of 30-35 µm); Finish coat: Synthetic Enamel Paint (F6), DFT 40-50 µm (2 coats of 20-25 µm); Total DFT shall be minimum 100 µm) at site of approved colour, including loading, transportation, unloading, delivery at erection site, storage and handling at site, site assembly and finally erection of structures at appropriate location, alignment and bolting/welding of all structures true to line, level, plumb and dimension. The work shall be completed in all respect as per drawings, technical specification and direction of the Engineer-in-Charge. (Payment shall be made based on approved fabrication drawings) |
AI Tender Summary
Tender Timeline
Jun 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 24, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 26, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender