Construction Of Circuit House At Pipu Circle, Chayang Tajo, Ph-Ii
Tender Value
2.90 Crore
Estimated cost
Bid Submission
27 Jun 2023
0 days left
EMD
2.90 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Kameng → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Circuit House At Pipu Circle, Chayang Tajo, Ph-Ii
BOQ
| Sl. No. | Item Description |
| 1 | SH:RCC Works. |
| 2 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1: 3 (1 cement: 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering and shuttering and reinforcement with 1: 2: 4 (1 cement: 2 coarse sands: 4 stone aggregate 20 mm nominal size). |
| 3 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centering and shuttering complete but excluding the cost of reinforcement with 1: 2: 4(1 cement:2 coarse sands: 4 stone aggregate 20 mm nominal size). |
| 4 | Reinforced cement concrete work in lintels, beams and bressummers up to floor two level including finishing and plastering the exposed surface with cement mortar 1: 3 (1 cement: 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 stoneaggregate 20 mm nominal size). |
| 5 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1: 3 (1 cement: 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. b) 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 stone aggregate 20 mm nominal size). |
| 6 | Centering and shuttering including strutting, propping etc and removal of form work for: c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 7 | d) Lintels, beams, girders, bressummers and cantilevers etc. |
| 8 | e) Column, pillars, posts and struts etc. |
| 9 | Reinforcement of RCC work including bending, binding and placing in position complete. a) Tar/ TMT Steel |
| 10 | SH: - Brick Works: |
| 11 | Brick work with best available local bricks in foundation and plinth in cement mortar 1:4 (1 cement: 4 fine sand). |
| 12 | Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level. |
| 13 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement: 4 coarse sand) in foundation and plinth. |
| 14 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 15 | SH: - Wood Works |
| 16 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 17 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
| 18 | Providing and fixing flush door shutters, decorative type, core of black board construction with frame of 1st class hard wood and well-matched 1st class teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. a) 40 mm thick including anodized aluminum butt hinges with necessary screws. |
| 19 | Providing and fixing paneled, glazed or paneled and glazed shutters for doors, windows and clerestory windows including aluminum butt hinges with necessary screws. a) 38mm thick best available local wood class - B I |
| 20 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1: 3: 6 (1 cement: 3 sands: 6 hard stone chips 40 mm nominal size). |
| 21 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill. |
| 22 | Providing and fixing M.S. sliding door bolts anodized transparent or dyed to required color or shade with nuts and screws etc. complete. a) 300 x 16 mm |
| 23 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc. complete. a) 300 x 10 mm |
| 24 | c) 150 x 10 mm |
| 25 | Providing and fixing aluminum Handles anodized transparent or dyed to required color or shade with necessary screws etc. complete. a) 125 mm |
| 26 | b) 100 mm |
| 27 | Providing and fixing 12 mm thick and 100 mm wide pelmet with 25 mm dia wooden curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc. complete. a) Timber class - A IV |
| 28 | SH: - Steel Works |
| 29 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 30 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc. complete (welding to be paid separately). |
| 31 | Providing and fixing MS round holding down bolts with nuts and washer plates etc. complete. |
| 32 | SH: - Flooring Works |
| 33 | Providing and fixing vitrified floor tiles of approved make with water absorption less than 0.08% and conforming to IS:15622 in all shades, colors laid on 20 mm thick cement mortar 1:4 i/c grouting the joints with white and matching pigment complete. [Flooring and Skirting] (c) Size of Tile -1000x1000 |
| 34 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1: 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 35 | SH: - Roofing Works |
| 36 | Providing corrugated G.I. sheet roofing fixed with galvanized iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses. a) 0.80 mm thick GI sheet |
| 37 | Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanized iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.a) 0.63 mm thick GI sheet |
| 38 | Providing and fixing 12 mm thick insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) |
| 39 | Providing & fixing suspended false ceiling which consist of metal frame work with GI bottom pre coated main tee and cross tee making grid of size 600 X 600 mm with support of J Butterfly hooks with GI 10 space SWG/5MM thick wire including laying of Perforated Gypsum (acoustically good) ceiling tile made of M/S India Gypsum Ltd 6 X 4 X 12.5 mm thick the work including 2 coats of top coat (MR- ULTRA) |
| 40 | Gypsum Board finishing corner 4 \" |
| 41 | SH: - Finishing Works |
| 42 | 15 mm cement plaster 1: 4 (1 cement: 3 fine sand) on the rough side of single or half brick wall. |
| 43 | 12 mm cement plaster 1: 4 (1 cement: 3 fine sand). |
| 44 | Providing two coats of acrylic water-based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. |
| 45 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 46 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 47 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 48 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 49 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 50 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 51 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 52 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 53 | SH: - Miscellaneous |
| 54 | Providing and fixing approved local wood (Class - B I) railing 91 cm high with 38 mm x 38 mm wooden bars at 10 cm center to center complete with top and bottom rails 89 mm x 51 mm complete. |
| 55 | SH: - Drainage |
| 56 | Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete. a) 150 mm dia SW pipes |
| 57 | Providing and laying cement concrete 1: 5: 10 (1 cement: 5 lime sand: 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 150 mm dia SW pipes |
| 58 | SH: - Water Supply |
| 59 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). a) 15 mm nominal bore |
| 60 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. (external work). a) 15 mm nominal bore |
| 61 | b) 20 mm nominal bore |
| 62 | Providing and fixing brass bib cock of approved quality. a)15 mm nominal bore |
| 63 | Providing and fixing brass stop cock of approved quality. a) 20 mm nominal bore |
| 64 | Providing and fixing PVC connection pipe with brass union.a) 15 mm nominal bore |
| 65 | Painting G.I. pipes and fittings with white paint over a coat of ready mixed priming coat both of approved quality for new work. a) 15 mm dia pipe |
| 66 | b) 20 mm dia pipe |
| 67 | SH: - Sanitary Installation Works |
| 68 | Providing and fixing white vitreous China water closet squatting pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Liter high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. a) Long Pan patten WC Pan |
| 69 | Providing and fixing white vitreous China pedestal type (European type WC pan) water closet with seat and lid with CP brass hinges and rubber buffers, 12.5 Liters white vitreous China low-level flushing cistern with fittings and brackets 40 mm white porcelain in enamel led flush band, 20 mm over flow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required.a) WC pan with white plastic seat and lid. |
| 70 | Providing and fixing white vitreous China flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required. b) Range of two urinals with 10 Liter CI automatic flushing cistern |
| 71 | Providing and fixing white vitreous China flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required. b) Range of two urinals with 10 Liter CI automatic flushing cistern |
| 72 | Providing and fixing white vitreous China wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality. |
| 73 | Providing and fixing a pair of white vitreous China foot rest of standard pattern for squatting pan WC. a) 250 x 130 x 30 mm |
| 74 | Providing and fixing CP Brass Chain and rubber plug complete for sink or wash basins. |
| 75 | Providing and fixing CP brass waste for wash basins and sinks. b) 40 mm dia |
| 76 | Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap. |
| 77 | Providing and fixing 600x450 mm beveled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers. |
| 78 | Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws. |
| 79 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). a) 750 x 20 mm size |
| 80 | Providing and fixing toilet paper holder. a) CP Brass |
| 81 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. a) 100 mm dia |
| 82 | b) 75 mm dia |
| 83 | Providing and fixing sand cast iron heel rest sanitary bend. a) 100 mm dia |
| 84 | b) 75 mm dia |
| 85 | Providing and fixing sand cast iron single equal plain junction of required degree. a) 100 x 100 x 100 mm |
| 86 | b) 80 x 80 x 80 mm |
| 87 | Providing and fixing sand cast iron trap of self-cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors. A). 100 mm inlet and 100 mm outlet |
| 88 | Electrical Installation |
| 89 | Internal Electrification |
| 90 | External Electrification |
| 91 | Power wiring and plugs |
| 92 | SH: - RCC Works |
| 93 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centering, shuttering and reinforcement in: a) M-20 (1 cement: 1.5 coarse sand: 3 stone aggregate 20 mm nominal size). |
| 94 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1: 3 (1 cement: 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering and shuttering and reinforcement with M 20 (1 cement: 1.5 coarse sand: 3 stone aggregate 20 mm nominal size). |
| 95 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centering and shuttering complete but excluding the cost of reinforcement with M 20 (1 cement:1.5 coarse sand: 3 stone aggregate 20 mm nominal size). |
| 96 | Reinforced cement concrete work in lintels, beams and bressummers up to floor two level including finishing and plastering the exposed surface with cement mortar 1: 3 (1 cement: 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M 20 (1 cement: 1.5 coarse sand: 3 stone aggregate 20 mm nominal size). |
| 97 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc. up to floor two level including finishing and plastering the exposed surface with cement mortar 1: 3 (1 cement: 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M 20 (1 cement: 1.5 coarse sand: 3 stone aggregate 20 mm nominal size). |
| 98 | Centering and shuttering including strutting, propping etc. and removal of form work for: a) Foundation, footings, bases of columns etc. and mass concrete. |
| 99 | c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 100 | d) Lintels, beams, girders, bressummers and cantilevers etc. |
| 101 | e) Column, pillars, posts and struts etc. |
| 102 | f) Stairs (excluding landings) except spiral stair cases. |
| 103 | Reinforcement of RCC work including bending, binding and placing in position complete. a) Tar/ TMT Steel |
| 104 | SH: - Brick Works: |
| 105 | Brick work with best available local bricks in foundation and plinth in cement mortar 1:4 (1 cement: 4 fine sand). |
| 106 | Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level. |
| 107 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement: 4 coarse sand) in foundation and plinth. |
| 108 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 109 | SH: - Wood Works |
| 110 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 111 | Providing and fixing flush door shutters, decorative type, core of black board construction with frame of 1st class hard wood and well-matched 1st class teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. a) 40 mm thick including anodized aluminum butt hinges with necessary screws. |
| 112 | Providing and fixing paneled, glazed or paneled and glazed shutters for doors, windows and clerestory windows including aluminum butt hinges with necessary screws. a) 38mm thick best available local wood class - B I |
| 113 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). |
| 114 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill. |
| 115 | Providing and fixing M.S. sliding door bolts anodized transparent or dyed to required color or shade with nuts and screws etc. complete. a) 300 x 16 mm |
| 116 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc. complete. a) 300 x 10 mm |
| 117 | c) 150 x 10 mm |
| 118 | Providing and fixing aluminum Handles anodized transparent or dyed to required color or shade with necessary screws etc. complete. a) 125 mm |
| 119 | b) 100 mm |
| 120 | Providing and fixing 12 mm thick and 100 mm wide pelmet with 25 mm dia wooden curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc. complete. a) Timber class - A IV |
| 121 | SH: - Steel Works |
| 122 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 123 | SH: - Flooring Works |
| 124 | Providing and fixing vitrified floor tiles of approved make with water absorption less than 0.08% and conforming to IS:15622 in all shades, colors laid on 20 mm thick cement mortar 1:4 i/c grouting the joints with white and matching pigment complete. [Flooring and Skirting] (c) Size of Tile -1000x1000 |
| 125 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 126 | Chequered Terrazzo Tiles 22 mm thick with marble chips of sizes upto 6mm in floors on 25 mm thick bed mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete: (a) Light shade using white cement. |
| 127 | SH: - Finishing Works |
| 128 | 15 mm cement plaster 1: 4 (1 cement: 3 fine sand) on the rough side of single or half brick wall. |
| 129 | 12 mm cement plaster 1: 4 (1 cement: 3 fine sand). |
| 130 | 6 mm cement plaster to ceiling 1: 3 (1 cement: 3 fine sand). |
| 131 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 132 | Providing two coats of acrylic water-based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the halp of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. |
| 133 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 134 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 135 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 136 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 137 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 138 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 139 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 140 | SH: - Water Supply |
| 141 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore |
| 142 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. (external work). a) 15 mm nominal bore |
| 143 | b) 20 mm nominal bore |
| 144 | Providing and fixing brass bib cock of approved quality.a)15 mm nominal bore |
| 145 | Providing and fixing brass stop cock of approved quality. a) 20 mm nominal bore |
| 146 | Providing and fixing PVC connection pipe with brass union.a) 15 mm nominal bore |
| 147 | Painting G.I. pipes and fittings with white paint over a coat of ready mixed priming coat both of approved quality for new work.a) 15 mm dia pipe |
| 148 | b) 20 mm dia pipe |
| 149 | SH: - Sanitary Installation Works |
| 150 | Providing and fixing white vitreous China water closet squatting pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Liter high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. a) Long Pan patten WC Pan |
| 151 | Providing and fixing white vitreous China pedestal type (European type WC pan) water closet with seat and lid with CP brass hinges and rubber buffers, 12.5 Liters white vitreous China low-level flushing cistern with fittings and brackets 40 mm white porcelain in enamel led flush band, 20 mm over flow pipe with specials and mosquito proof coupling of approved municipal design complete including cutting and making good the walls and floors where required. a) WC pan with white plastic seat and lid. |
| 152 | Providing and fixing white vitreous China flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required. b) Range of two urinals with 10 Liter CI automatic flushing cistern |
| 153 | Providing and fixing white vitreous China wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality. |
| 154 | Providing and fixing a pair of white vitreous China foot rest of standard pattern for squatting pan WC. a) 250 x 130 x 30 mm |
| 155 | Providing and fixing kitchen sink including making all connection excluding cost of fittings. a) White glazed fire clay sinks size 600x450x150 mm |
| 156 | Providing and fixing CP Brass Chain and rubber plug complete for sink or wash basins. |
| 157 | Providing and fixing CP brass waste for wash basins and sinks. b) 40 mm dia |
| 158 | Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap. |
| 159 | Providing and fixing 600x450 mm beveled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleat with CP brass screws and washers. |
| 160 | Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws. |
| 161 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). a) 750 x 20 mm size |
| 162 | Providing and fixing toilet paper holder. a) CP Brass |
| 163 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. a) 100 mm dia |
| 164 | b) 75 mm dia |
| 165 | Providing and fixing sand cast iron heel rest sanitary bend. a) 100 mm dia |
| 166 | b) 75 mm dia |
| 167 | Providing and fixing sand cast iron single equal plain junction of required degree. a) 100 x 100 x 100 mm |
| 168 | b) 80 x 80 x 80 mm |
| 169 | Providing and fixing sand cast iron trap of self-cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.100 mm inlet and 100 mm outlet |
| 170 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 171 | SH: - CC Pavement Works (130.00 Mtrs.) |
| 172 | Preparation of sub grade by excavating earth to an average depth of 22.50 cm, dressing to camber and consolidating with road roller, making good the undulations etc. and disposal of surplus earth, lead up-to 50 m. |
| 173 | Consolidation of sub-grade with road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the sub grade. |
| 174 | Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2) |
| 175 | Granular Sub-base with Close Graded Material (Table: -400-1) Plant Mix Method (Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, the desired density, complete as per clause 401) surface and compacting with vibratory power roller to achieve spreading in uniform layers with motor grader on prepared the desired density, complete as per clause 401) |
| 176 | By Manual MeansCement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved. |
| 177 | SH: - CC Drain without Lid (95 Mtrs.) |
| 178 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling with approved materials.) Mechanical Means up to 3.00 mtr. Depth (with de-watering)(i) Ordinary soil |
| 179 | (ii) Ordinary rock |
| 180 | PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 mix with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.) |
| 181 | Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications A). PCC Grade M15 |
| 182 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 183 | Centering and shuttering including strutting propping etc. and removal of form work for: Foundations and plinth |
| 184 | SH: - CC Drain without Lid (100 Mtrs.) |
| 185 | Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling with approved materials.) Mechanical Means up to 3.00 mtr. Depth (with de-watering) (i) Ordinary soil |
| 186 | (ii) Ordinary rock |
| 187 | PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 mix with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.) |
| 188 | Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications A). PCC Grade M15 |
| 189 | Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications C). RCC Grade M20 |
| 190 | Supply, fitting and placing of HYSD bar reinforcement in super-structure complete as per drawing and technical specification |
| 191 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 192 | Centering and shuttering including strutting propping etc. and removal of form work for: a.Foundations and plinth |
| 193 | SH: - C/o MS Gate |
| 194 | Providing and fixing iron compound gate of size 3.25 x 2.25 m with RCC post of size 300mm x 250mm of mix 1:2:4 (1cement:2 coarse sand: 4 graded stone) 20mm nominal size including cost of earth work, reinforcement, centering, shuttering and fixing of M.S. Gate A). Excavation in decomposed or soft rock with or without blasting including disposal of the same lead upto 50 m and lift upto 1.50 m.RCC Columns |
| 195 | Providing and laying in foundations and plinth cement concrete 1: 4: 8 (1 cement: 4 coarse sands: 8 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering. |
| 196 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 197 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 198 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc. up to floor two level including finishing and plastering the exposed surface with cement mortar 1: 3 (1 cement: 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. |
| 199 | 12 mm cement plaster 1 : 3 (1 cement : 3 fine sand). |
| 200 | White washing with lime on new work (two or more coats) to give an even shade |
| 201 | Iron Gate, (Area of Gate) |
| 202 | M.S Hooks |
| 203 | SH: - Providing Furniture and Crookeries |
| 204 | VIP Sofa Set |
| 205 | King Size Bed |
| 206 | Dining Table with Chair |
| 207 | Center Table with top sun mica |
| 208 | Computer Chair |
| 209 | Office Chair |
| 210 | Office Table |
| 211 | Godrej Almarah |
| 212 | Wooden Meat Safe |
| 213 | Water Filter (10 Ltr. Capacity) |
| 214 | Decorated Alna |
| 215 | Plastic Chair |
| 216 | Plastic Cushion Chair |
| 217 | Gass Connection with double cylinder |
| 218 | Double size Dunlop Mattress |
| 219 | Pillow with Cover |
| 220 | Bed Sheet (Bombay Dyne) |
| 221 | Towel |
| 222 | Mosquito Net |
| 223 | Door Mat |
| 224 | LCD (TV) with TATA SKY Connection |
| 225 | Double door Refrigerator |
| 226 | Generator |
| 227 | Crookeries Item |
AI Tender Summary
Tender Timeline
Jun 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender