Tender For Construction Of Lane Drain At Moh Govind Ram , Pawan Kumar , Doulat Ram And Others Wno.8 And Constt. Of Lane With Culvert At Moh Ashwani Kumar Jang Bahadur And Others Wno.6
Tender Value
3.43 Lakhs
Estimated cost
Bid Submission
26 Jun 2023
0 days left
EMD
6860
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
marheen → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Lane Drain At Moh Govind Ram , Pawan Kumar , Doulat Ram And Others Wno.8 And Constt. Of Lane With Culvert At Moh Ashwani Kumar Jang Bahadur And Others Wno.6
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 metre from cutting edge |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | plainconcrete |
| 5 | 20% boulders |
| 6 | Providing and laying in positionstone aggregate 40 mm nominal sizeincluding watering, ramming , etc all iems complete job as per directions of Engineer in charge |
| 7 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 16.94.1 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern |
| 8 | Centring and shuttering including propping ,strutting etc. & removal of the form work. |
| 9 | a) Foundations & Footings, bases of columns etc. for mass concrete |
| 10 | b)Suspended floors, roofs, landings, balconies and access platforms. |
| 11 | c) Edges of slabs and breaks in floors and walls under 20 cm wide |
| 12 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3(1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more (To be paid as per actual). |
| 14 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete |
| 15 | Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in All kinds of soil: |
| 16 | Carriage of sand and bajri 10 km by MT |
| 17 | Providing and fixing CIB of approved shape and size(LMR) |
AI Tender Summary
Tender Timeline
Jun 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 26, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender