Tender For Supply And Installation Of Cutting Tools For The Upgradation Of Priority Gitis Across Uttarakhand
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2023
0 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Supply And Installation Of Cutting Tools For The Upgradation Of Priority Gitis Across Uttarakhand
BOQ
| Sl. No. | Item Description |
| 1 | SUPPLY AND INSTALLATION OF CUTTING TOOL FOR THE UPGRADATION OF PRIORITY GITIS ACROSS UTTARAKHAND |
| 2 | Adjustable pipe die set BSP cover pipe size 1\" or 3/4\" |
| 3 | Centre drills 3 mm (Consumable) |
| 4 | Centre drills 4 mm (Consumable) |
| 5 | Centre drills 5 mm (Consumable) |
| 6 | Centre drills A 1 to 5 |
| 7 | Centre drills No. 3, 4 & 5 |
| 8 | Collapsible Tap with attachment |
| 9 | Coventry Die head |
| 10 | Coventry Type Die Head (Self-opening) |
| 11 | Die and Wrench Ø6,Ø8,Ø10,Ø12 |
| 12 | Die for Threading Different sizes |
| 13 | Dies Set 3 mm to 10 mm |
| 14 | Drill H.S.S. taper shank (6 mm to 12 mm instep of 0.5 mm) |
| 15 | Drill S.S. Twist block 2 mm |
| 16 | Drill S.S. Twist block 5 mm |
| 17 | Drill S.S. Twist block 6 mm |
| 18 | Drill Twist (straight shank) 1.5 mm to 15 mm by 0.5mm |
| 19 | Drill Twist (straight shank) 1.5 mm to 8 mm by 0.5mm |
| 20 | Drill Twist (straight shank) 3 mm to 12 mm by 0.5 mm H.S.S. |
| 21 | Drill Twist (straight shank) 3 mm to 12 mm by 1 mm H.S.S. |
| 22 | Drill Twist (straight shank) 3 mm to 13 mm by 0.5 mm H.S.S. |
| 23 | Drill Twist (straight shank) 3mm |
| 24 | Drill Twist (straight shank) 3mm to 6mm |
| 25 | Drill Twist (straight shank) 4 mm to 12 mm in step of 0.5 mm H.S.S. |
| 26 | Drill Twist (straight shank) 4mm |
| 27 | Drill Twist (straight shank) 6mm |
| 28 | Drill Twist (Taper shank) 14 mm to 20mm by 1 mm |
| 29 | Drill Twist (Taper shank) 8 mm to 20 mm by 0.5 mm H.S.S. |
| 30 | Hand Chaser M-12 & M-16 (External) |
| 31 | Hand Chaser M-12 & M-16 (Internal) |
| 32 | Hand keyway breacher |
| 33 | Hand reamer 6 to 16mm in steps of 1 mm |
| 34 | Hand Reamer set (Taper pin straight flute) Nominal Dia. 6, 8, 10, 12, 16mm |
| 35 | Hand reamers adjustable 10.5 to 11.25 mm, 11.25 to 12.75mm, 12.75 to 14.25 mm and 14.25to 15.75 mm |
| 36 | Indexable boring bar with inserts |
| 37 | Involute Gear cutter Size 2,2.5,3 module 20° pressure angle |
| 38 | Lapping plate Dia 6\" |
| 39 | Machine Chaser M-12 to M-21 |
| 40 | Machine reamer 6 mm to 25 mm by 1 mm |
| 41 | Machine reamer 6 to 16mm in steps of 1 mm |
| 42 | Machine Reamer parallel (Helical flute) 12 - 16mm set of 5. |
| 43 | Milling Cutter -Concave Ø 63 x 6 radius x 27 mm Bore Diameter |
| 44 | Milling Cutter -Convex Ø 63 x 6 radius x 27 mm Bore Diameter |
| 45 | Milling Cutter -Cylindrical Cutter Ø 63 mm, 90 mm Length and 27 mm Bore Diameter |
| 46 | Milling Cutter -Cylindrical Cutter Ø 63 x 70 x Ø 27 mm |
| 47 | Milling Cutter -Cylindrical Cutter Ø 80 mm, 90 mm Length and 27 mm Bore Diameter |
| 48 | Milling Cutter -Double Angle Unequal Cutter 50 X 12 X 27mm bore dia 55° |
| 49 | Milling Cutter -Double Angle Unequal Cutter 50 X 12 X 27mm bore dia 60° |
| 50 | Milling Cutter -Double Angle Unequal Cutter 63 X 18 X 27mm bore dia 70° |
| 51 | Milling Cutter -Double AngleUnequal Cutter 63 X 18 X 27mm bore dia 75° |
| 52 | Milling Cutter -Equal Angle Cutter 45°/100 mm x 27mm bore dia |
| 53 | Milling Cutter -Equal Angle Cutter 60°/100 mm x 27mm bore dia |
| 54 | Milling Cutter -Equal Angle Cutter 90°/100 mm 27 mmbore dia |
| 55 | Milling Cutter -Parallel Shank endmills Ø 6, Ø 10 and Ø 16are (double fluted), Ø 20 mm & Ø 25mm(four fluted) |
| 56 | Milling Cutter -Shell End Mill Ø 50 x 36 x 27 mm, Preferably InsertedTip Type |
| 57 | Milling Cutter -Shell End Mill Ø 75 mm x 50 x 27 mm, PreferablyInserted Tip Type |
| 58 | Milling Cutter -Side and face cutter dia 100 X 10 X 27mm |
| 59 | Milling Cutter -Side and face cutter dia 160 X 16 X 27mm |
| 60 | Milling Cutter -Side and face cutter dia 200 X 20 X 27mm |
| 61 | Milling Cutter -Side and face cutter dia 80 X 8 X 27 mm |
| 62 | Milling Cutter -Side and face cutter Ø 80 x 10 X Ø 27 mm |
| 63 | Milling Cutter -Single Angle Cutter 63 x 18 x 45°RH 27 mm bore dia |
| 64 | Milling Cutter -Single Angle Cutter 63 x 18 x 60°LH 27 mm bore dia |
| 65 | Milling Cutter -Single Angle Cutter 63 x 18 x45°LH 27 mm bore dia |
| 66 | Milling Cutter -Single Angle Cutter 63 x 18 x60°RH 27 mm boredia |
| 67 | Milling Cutter -Slitting Saw Cutter Ø 100 x 6 X Ø 27mm |
| 68 | Milling Cutter -Slitting Saw Cutter Ø 75 x 3 X Ø 27 mm |
| 69 | Milling Cutter -T Slot Cutter with Parallel Shank Ø 17.5 x 8 mm Width x Diameter ofshank 8 mm |
| 70 | Milling Cutter-Side and face cutter dia 100 X 12 X 27mm |
| 71 | Milling Cutter-Side and face cutter dia Side and face cutter dia 160 X 10 X 27mm |
| 72 | Number drills H.S.S. (parallel shank) |
| 73 | Parallel shank end mills Ø10 mm |
| 74 | Parallel shank end mills Ø12 mm |
| 75 | Parallel shank end mills Ø5 mm |
| 76 | Parallel shank end mills Ø6 mm |
| 77 | Parallel shank end mills Ø8 mm |
| 78 | Parting Tool Holder with H.S.S. blade |
| 79 | Pipe stock and dies complete with stocks,bushing, bushing holders, Taps and wrenches sizes covered, to suit pipes bore dia 6, 8, 10, 20, 25, 32,40 & 50 mm |
| 80 | Pipe threading die with handle Ratchet type Die head of 1/2”, 3/4\" and 1\" |
| 81 | Rachet pipe die 15 mm to 32 mm |
| 82 | Reamer Adjustable 10 mm to 15 mm |
| 83 | Reamer Adjustable 10 mm to 20 mm |
| 84 | Set of stock and dies - Metric |
| 85 | Shaper indexing center |
| 86 | Shaper indexing centre |
| 87 | Shaper tool holder turret type |
| 88 | T slot cutter with parallel shank Ø 17.5 x 8 mm width x dia. of shank 8 mm |
| 89 | Tap set Different size |
| 90 | Tap set with matching drills 1/8” to 5/8” |
| 91 | Tap set with matching drills 3 mm to 16mm |
| 92 | Tap Wrench (adjustable) M6,M8,M10,M12 |
| 93 | Taps and dies B.A. No. 0 to 10 in a box |
| 94 | Taps and dies B.S.F. up to 1 inch |
| 95 | Taps and dies B.S.W. up to 1 inch |
| 96 | Taps and dies metric 3 mm to 24 mm complete set in a box |
| 97 | Taps and dies metric 5 mm to 12 mm complete set in a box |
| 98 | Taps and wrenches Metric 5 mm to 12 mm |
| 99 | Taps set 3mm to 10mm |
| 100 | Tool Bits 12 X 150 mm sq |
| 101 | Trepanning tool 70mm |
| 102 | Woodruff key seating cutters A 13.5x3 |
| 103 | Woodruff key seating cutters A 16x4 |
AI Tender Summary
Tender Timeline
Jun 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 20, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender