Tender For Proposed Construction Of W.B.M. Road And Cc Drain To 7.50M. Wide Road From (D To E )Gundiba Gaike House To Bibhishan Ware House At Dhangar Wada ( Ahilyadevi Holkar Nagar) For Municipal Councial Dharur Dist. Beed
Tender Value
8.27 Lakhs
Estimated cost
Bid Submission
26 Jun 2023
0 days left
EMD
8277
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dharur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proposed Construction Of W.B.M. Road And Cc Drain To 7.50M. Wide Road From (D To E )Gundiba Gaike House To Bibhishan Ware House At Dhangar Wada ( Ahilyadevi Holkar Nagar) For Municipal Councial Dharur Dist. Beed
BOQ
| Sl. No. | Item Description |
| 1 | Description of Work |
| 2 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.SSRI.No. 2.11P.No. 23 |
| 3 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. Spec. No.:MORTH 305 SSRI.No. 2.25P.No. 24 |
| 4 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. SSRI.No. 2.29a Page No. 25 |
| 5 | Spreading hard murum for side width etc.complete SSRI.No. 2.30P.No. 25 |
| 6 | Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete. SSRI.No. 2.31P.No. 25 |
| 7 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means -Grading I (Using Screening Type B (11.2 mm) Aggregate)Screening Type B (11.2 mm) Aggregate) ( SSR 18-19 I. No. 3.20,P. No. 34) |
| 8 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. Grading II (Using Screening Type B (11.2 mm) Aggregate)( SSR 18-19 I. No. 3.20,P. No. 34) |
| 9 | BASIC TEST OF AGGREGATE-Water Absorption, Specific Gravity,Impact Value, Crushing Value. |
| 10 | MURUM - C.B.R. Test ( Lab ) With compaction test. |
| 11 | Other Material (211.95+4.23= 216.18) |
| 12 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Spec No. Bd.A.1 Page No.259 SSRI.No. 21.02P.No. 153 |
| 13 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. Spec. No.:MORTH 305SSRI.No. 2.25P.No. 24 |
| 14 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSRI.No. 24.01P.No. 175 |
| 15 | Providing and casting in situ cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer . . With natural sand. Spec. No. : Bd.E.4 Page No. 289 and B-7, Page No.38SSRI.No. 24.08P.No. 176 |
| 16 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSRI.No. 25.70P.No. 182 |
| 17 | Providing and fixing in position TMT / HYSD steel bars reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed.Spec. No. : Bd.F.17 Page No. 306SSRI.No. 26.33P.No. 188 |
| 18 | CONCRETE- Compressive Strength OF C.C. Cube(Set of 3 cubes). |
| 19 | STEEL BAR TESTINGUpto 16 mm (Set of 3 Bars) |
AI Tender Summary
Tender Timeline
Jun 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 26, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender