Military Engineer Services-MES has published Tender For Certain Repairs To Flooring Plastering Joinery Sanitary Fittings And Internal Water Supply Including Misc Repair Works To Compound Wall Fencing In Nts Area At Afssr Under Ge Af Gurgaon. Submission Date for this Tender is 17-07-2023. Civil Work Tenders in gurgaon Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-07-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and as directed by Engr-in-Charge. |
| 2 | M&L for Brickwork with subclass "B" bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by Engr-in-Charge. |
| 3 | Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and as directed by Engr-in-Charge. |
| 4 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge. |
| 5 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge. |
| 6 | M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 7 | M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed by Engr-in-Charge. |
| 8 | M&L for preparation of new plaster surface & apply twocoats of cement based paint over a coat alkali primer resistance complete all as specified and as directed by Engr-in-Charge. |
| 9 | M&L preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paintwith approved Tint over a coat of Primer (as per Manufacturer"s instructions), complete all as specified and as directed. |
| 10 | Material and labour for complete of newly plastered surfaces as of walls and applying twocoats of oil bound distemper over a coat of alkali resistant primer to achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed. |
| 11 | M&L for preparation of new surfaces ofsteel and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 12 | M&L for preparing new plastered surface of Ceilling and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and as directed. |
| 13 | Material and labour for preparation of old painted surfaces of steelsurface of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed. |
| 14 | Material and labour for preparation of old painted surfaces ofconcerete surface of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed. |
| 15 | Material and labour for preparation of old painted surfaces of wood and wood basedof any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed. |
| 16 | M&L for preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of oil bound distemper, complete all as specified and as directed. |
| 17 | M&L for preparation of old surfaces of cellingincluding brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of white wash on celling, complete all as specified and as directed. |
| 18 | Material and labour for preparation of old plastered surfaces as of walls and applying onecoats of cement based paintachieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed. |
| 19 | Material and labour for preparation of old plastered surfaces as of walls and applying one Coats of acrylic Weather Coat Exterior Paintachieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed. |
| 20 | Demltion of cement concrete complete all as specified and as directed. |
| 21 | M&L forPCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying offloor finishes complete all as spd and as directed by Engr-in-Charge. |
| 22 | M & L for 75mm thickPCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring incl demolition complete all as spd and as directed by Engr-in-Charge. |
| 23 | M & L forPCC 1:2:4 Type B-1 (using 20mm graded stone aggregate) as in flooring, coping,incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises incl necessary formwork where reqd andcomplete all as spd & as directed by Engr-in-Charge. |
| 24 | Dismantling floor hearth, floor tiles, brick tiles, stone, slabsor wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed. |
| 25 | M&L for first quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurryover and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. |
| 26 | M&L for first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border of size 350x 450 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white cement with pigment to match with shade of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), complete all as specified and as directed. Note :- Pattern of the tiles shall be approved by GE at the time of execution. |
| 27 | M& L for Glazed ceramic jointless light/coloured group of sizeexc 0.13sqm but n.exc 0.18sqm erea of each tiles andthicknes of wall tile not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match,laid over and including 10mm thick plastering in cement mortar 1:4,complete all as spd and as directed. Note : shade & design as approved by GE. |
| 28 | M&L forvitrified ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles(square or rectangular) area of each tile exe 0.14 Sqm but n.exe 0.36 Sqm, laid in floors set and jointed with neat cement slurry and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. |
| 29 | M&L for Granite 18-20mm thick (of any type) work(table rubbed and polished), floor, wall, pillars in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeingcomplete all as spd and as directed. |
| 30 | M&L for green marble / udaipur green 18-20mm thick (of any type) work(table rubbed and polished)in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing andcomplete all as spd and as directed. |
| 31 | M&L for Kota Stone 18-20mm thick (of any type) work(table rubbed and polished)in steps, jambs, flooring platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing andcomplete all as spd and as directed. |
| 32 | M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L for exterior grade, coloured glossyfinish ceramic designer endura tiles of size 30cm x 30cm x 8-10mm thick(as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc complete all as specifed and as directed |
| 34 | M&L for machine pressed precast concrete interlocking paver block of 60mm thickness any shape and size confirming to IS 15658 -2006, with grey cement, pigmentincl 25mm thick sand filling as cushioningcomplete all as specified and as directed by Engr-in-Charge. |
| 35 | All as per srl item 34 above but except paver block shall be reused after necessary cleaning , removing vegetation and making good complete all as spd & as directed by Engr-in-Charge |
| 36 | S&F in repair, brass CP central hole mixture 15mm bore (dia) without Popup waste system with 450mm long proivded hoses incl flange suitable for wash hand basin complete all as spd and as directed. |
| 37 | S&F in repair brass CP wall mixture unit HOT and Cold Shower suitable for fixing in 15mm bore dia pipe incl flange complete all as spd and as directed. |
| 38 | S&F in repair brass CP sink mixer 15mm bore dia , wall mounted with 122mm (5") Swivel spout connecting legs incl wall flanges complete all as spd and as directed. |
| 39 | S&F in repairs CP brass health faucet of 15mm bore pipe with 1.5 mtr. Flexible pipe screwed for iron pipe fancy type long body complete all as specified and as directed. |
| 40 | S & F in repairs 10 litres capacity, PVC valve less, syphonic action type,flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and as directed. |
| 41 | S&F in repair plastic water closet seat cover of any color closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, complete all as specified and as directed. |
| 42 | S&F in repairs VitreousChina wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe), fixed in repairs, including connection to waste pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and as directed. |
| 43 | S&F in repairs Wash basins, vitreous china, white, flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets complete all as specified and as directed. |
| 44 | S&F for vitreous China, wash hand basin, counter top, white, of size 530mmx445mmx195mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs, complete all as specified as directed. Make: Jaquar Cat Part No. ECS-WHT-601 or equivalent out of makes spd in list of makes. |
| 45 | S&Fwash hand basin table top of size 460x460x170 mmvitrous China including , waste coupling & PVC waste pipe of 32 mm dia etc in repair. complete all as specified and directed.Make Jaquar cat part No - JDS-WHT-25935 or equivalent out of makes spd in list of makes. |
| 46 | S & F in repair vitreous china urinals, half stall type (635x450mm) , complete including providing and fixing , bedding urinal against wall in cement mortar 1:2 , pointing around urinal back in cement , grating and union for discharge pipe, CP urinal spreaderand fitting with bottel trap & CP waste coupling complete all as specified and as directed by Enger-in-Charge. |
| 47 | S&F for One piece closet with bowl for cupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360mmx680mmx765mm, strap 220mm cistern with cistern fittings and necessary fixing fittings complete, fixed in repairs, complete all as specified and as directed. Make:Jaquar Cat Part No. CNS-WHT-755SS or equivalent out of makes spd in list of makes. |
| 48 | S& F for Rimless bowl with Cistern for extended Wall Hung WC with PP Soft Close Seat cover, Hinges, Dual Flush Cistern Fitting, Accessories Set, Size: 380x650x730 mm alongwith all necessary fittings as in repairs, complete all as specified and as directed. Make cat part No Jaquar FLM-WHT-5353PPZ or equivalent out of makes spd in list of makes. |
| 49 | S&F in repairs 900x450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial complete all as specified and as directed. plywood and fixed to wooden plugs with chromium plated brass screws & cup washers, complete all as specified.Make:Prayag Cat Part No. BLM-03 complete all as specified and as directed. |
| 50 | S & F in repairs 600 x 450mm bevelled edge Mirror of selected quality glass,fancy type mounted on 6mm thick AC building board or commercial plywood with wooden frame all round and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 51 | S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors including taking down complete all as specified and as directed. |
| 52 | S & F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors including taking down complete all as specified and as directed. |
| 53 | S&F 75mm bore PVC(SWR) pipes single socketed Pressure rating @4Kg/Sq cm medium grade in any length with rubber ring joint, fixed to walls / trenches including taking down eaves, gutters rain water pipes (any size or pattern) including all all fittings as bends, sockets & clamps, clamps 50mm x 5mm,incl dismantling of old unsv PVC pipes complete all as specified and as directed. Make Supreme,Finolex,Jyoti. |
| 54 | S&F 110mm bore PVC(SWR) pipes single socketed in any lengthpressure rating 4Kg/Sq cmmedium Grade fixed to walls in any position or laid in floor/earth with dash true nut and bolt at every 2mtr length including)includingall fittings as bends, sockets & clamps and incl taking down old / unsv PVC pipes incl bends & sockets complete all as specified and directed by Engineer-in-charge. |
| 55 | S&F pressed steel frames of size 125 x 60 mm for doors with two or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling with PCC (1:3:6), type C-0, including taking down existing frame with shutter complete all as specified and as directed by Engineer in charge. |
| 56 | S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling with PCC (1:3:6), type C-0, including taking down existing frame with shutter complete all as specified and as directed by Engineer in charge. |
| 57 | S & F 35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated and prepared to receive glass, gauge etc edges of framing plain chamfered or rounded fitted with cut & mitred beads for securing glass etc size of members shutter as specified in SSR Part I Section 8, Clause 8.23 (a) supplied and fitted to chowkhats including 3 Nos 100mm SS hinges, 2 Nos 200mm Alm tower bolt, 2 Nos 125mm Alm handles & 01 No 250mm Alm sliding bolt complete all as specified and as directed by Engineer in charge. |
| 58 | S&F factory made 30mm IInd class hard wood Flush shutters, solid core construction, with block board core and plywood face panels,one side laminatedtype on both sides including 3 Nos 100mm SS hinges, 2 Nos 200mm Alm tower bolt, 2 Nos 125mm Alm handles & 01 No 250mm Alm sliding bolt complete all as specified and as directed by Engineer in charge. |
| 59 | S&F PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS Square tub, suppling & fixing in opening as per specification and drawingincluding taking down existing frame with shutter complete all as specified and as directed by Engineer in charge. |
| 60 | S&F in repairsFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supply & fixing in the frame at site as per specification & drawing including 3 Nos 100mm SS hinges, 3 Nos 150mm SS tower bolt & 2 Nos 125mm SS handles complete all as specified and as directed by Engineer in charge. |
| 61 | S&F in repairs, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead,complete all as specified and as directed. |
| 62 | S & F in repair,3mm thick ordinaryglass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, incl Hacking out old broken glass complete all as specified and as directed. |
| 63 | Taking down existing toughended glass door of 10mm thick glass of any size any size / areaand carrying out necessary fitting / adjustment / balancing andtaking down unserviceable hardwares and replacing with new hardwares as fixing of floor door closer / locking arrangement / handle and other necessary fixing arragement etc, for smooth functioning and and re-fixing the toughened door shutterin position all as specified and as directed. Notes :- Rates are inclued for all misc hardware as clips, rubberbeading, hinges or handles and deemed to be in qouted rates. |
| 64 | S&F tinted toughened glass door of 10mm thickglass of selected qualtiy with two Nos Handle 300mm long of stainless steel and incl all other necesary fixing and locking arragement with itching if reqd except item No 65 & 66 below and dismantling of existing door shutter complete all as specified and as directed. |
| 65 | Supply only double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet /stainless steel 304 grade foundation box, main body with stainless steel cover governing pivot made of brass and incl other parts as TOP Pivot, Top Patch and Bottom Patchmade of heavy duty of load bearing capacity 80kg complete all as specified and as directed. (Make OZONE of equivalent as approved by GE) |
| 66 | Supply only double actionTOP Pivot, Top Patch and Bottom Patch as in supporting of floor door closer to fix toughned glass of heavy duty of load bearing capacity 80kg made of Stainless steel complete all as specified and as directed. |
| 67 | Taking down existing ACP sheet frame / glass frame fixed in wall as glazing at any height upto 12 mtr and carryout / replacement of necesary damaged rubber biding and applying silicon / other reqd adhesive to stop leakage and refixACP sheet frame / glass frame in positon in wall as glazing at any height upto 12 mtrcomplete all as specified and as directed. Notes :- Rates are inclued for all misc hardware as clips, rubberbeading,silicon / adhesive and deemed to be in qouted rates. / |
| 68 | Taking down existing aluminium door shutter / window shutters any size and carry out necessary servicingandtaking down unserviceable hardwares and replacing with new hardwares as rubber clips, pivot hinges, floor door closer, hydraulic door closer, hinges, beadings , handle , locking arragement etc, for smooth functioning and and re-fixing the door / window shutters in position complete all as specified and as directed. Notes :- Rates are inclued for all misc hardware as clips, rubberbeading,hinges or handles and deemed to be in qouted rates. / |
| 69 | S&F anodised aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators , partions walls with one or more rebates including joining cleat , rubber clips for fixing etc. as in repairs complete all as specified and as directed by Engr-in-Charge. |
| 70 | S&Fanodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary 5.5mm thick sheet glass , joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, 200mm aumn tower bolt, locking arragement aluminum snap beading screws etc. as in repairs complete all as specified and as directed by Engr-in-Charge. |
| 71 | S&Fanodised aluminium window/ ventilors shutters / partion wall, aluminium section weighing 0.55 kg/m including necessary 5.5mm thick sheet glass , joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, 150mm aumn tower bolt, locking arragement aluminum snap beading screws etc. as in repairs complete all as specified and as directed by Engr-in-Charge. |
| 72 | S&F in repairs aluminium grills standard design, fixed in position including taking down existing unserviceable grills of any description and making good the disturbed surfaces all as specified and as directed. Note:The weight of the grill shall not be less than 2.2 Kg/SqM |
| 73 | S&F window / ventilator section of frame72x55 mmfixed to wall or concrete surface with rowl plugsmade, of galvanized steel powder coated and section of shutter 47x20 mm ,mulion section 72x50 mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/sqm.) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter(Double door shutter) with total coated thickness of 0.6 mm including grills/guard bars made of square bars powder coated fixed to windows frame with screws at 150mm c/c both ways, 4 to 5 mm thick sheet glass, 0.36mm stainless steel wire cloth with 1.40mm aperture necessory fittings and all builders hardware such as handles, tower bolts & stays etc. as in repairs complete all as specified and as directed Make:- NCL type-4000 series or equivalent make as approved by GE. |
| 74 | S&F Rotational moulded polyethylene water storage tank 500 litres capacity, ISI markedtriple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms including all fittings and gate valves with iron wheel head 20mm size, including dismantling of old water tank complete all as specified and as directed.Make-SINTEX /POLYCON /Polywell. |
| 75 | S&F Rotational moulded polyethylene water storage tank 1000 litres capacity, ISI markedtriple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms including all fittings and gate valves with iron wheel head 20mm size, including dismantling of old water tank complete all as specified and as directed.Make-SINTEX /POLYCON /Polywell. |
| 76 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-Charge. |
| 77 | M&L for Non-asbestos fiber cement building Boards 6.0mm thick, fixed to walls with rawl plugs and steel screws, complete all as specified and as directed. |
| 78 | S&F for 4mm thick acrylic sheet board of High qualitywith Media printing of 3m of best quality(size/frame of board , design of bd , type of print on sheet , size of studd , samples of letter, pictures, writing will be provided by accepting officer or Engr-in-Charge) and fixed at any height from GL to 29 Mtr height incl stainless steel studds (min 4 studs at each board / sheet )incl dismantling of existing damaged sheetscomplete all as specified and as directed by Engr-in-Charge. Note : Minimum weight of Acrylic Sheet not less than 4.70kg per sqm (Acrylic sheet make A Cast / Astari / Marka Cipta and stainless steel of grade A-ISI 304(1818). (Note : Minimum 04 Nos Stainless steel studs to be used in fixing each sheet and rates to be included in quoted rates.) |
| 79 | Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings complete all as specified and as directed. |
| 80 | Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie complete all as specified by Engr-in-Charge and as directed. |
| 81 | S& F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specifed and as directed by Engr-in-Charge. |
| 82 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and complete all as directed by Engr-in-Charge and specified. |
| 83 | S&F for pre-painted half circular factory made for chajjagalvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in chajja, roof projection etc at height upto G+3, fixed with self tapping screws as specified and incl dismantling of existing damaged RCC chaaja / roof projection and making good surface matching to existing before fixing of sheet complete all as specified and as directed by Engr-in-Charge. |
| 84 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet and one side plain colour PVC Sheet inclusive of solvent cement and fixing atsite on PVC frame as per specifications and drawing complete all as spd and as directed. |
| 85 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as spd and as directed. |
| 86 | Dismantling Brick tiles or terracing tiles, single layer on roofs etc complete all as specified and as directed. |
| 87 | Demolition Mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only or part thereof) complete all as spd and as directed. |
| 88 | M&L forPCC type B-0, 1:3:6 (using 12.5 mm graded stone aggregate) as in laying on roof, coping, kerb, finishes complete all as spd and as directed by Engr-in-Charge. |
| 89 | M&L for 10mm thick rendering in cement mortar 1:3 on concrete surfaces of roof slab / conerete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 90 | M&L for APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) with 15 cm longitudinal&horizontal over lapping and joints finally pasted with thermo- fused withblow lamp laid over a coat bitumen @ 1.20 Kg /Sqm over bituminousprimer 0.30 ltr per sqm as per APP manufacturerinstructionsetc complete all as specified and as directed. |
| 91 | M&L for two coat of aluminium paint over top surface of water proofing membraneetc complete all as specified and as directed. |
| 92 | M&L for washed stone grit plaster on exteriorwalls in two layers, under layer 12mm cement plaster 1:4 (1 Cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @3Kg of cement per sqm, top layer 15mm cement plaster with GREY CEMENT 1:1/2:2 (1 GREY CEMENT :1/2 coarse sand : 2 Marble stone chipping 10mm nominal size ) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushed and water to expose the marble ston chipppings complete all as specified. The groove shall be 15 mm wide and 15 mm deep in the top layer of washed stone girt plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden batterns, repair to the edges of panels and finishing the groove complete as per specificatio and direction of the Engr-in- Charge. Note : Area includes in this items upto 4 stories of building, necessary scaffolding and arrangements are deemed to be included in rates. |
| 93 | Dismantling existing old vintage damaged andrusted / faded road MS sign boards complete all as spd and as directed. |
| 94 | Excavating in post holes (or similar holes) in each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance not exceeding 100 mtr making goodin soft/ loose soil complete all as specified and as directed. |
| 95 | Material& Labour for providing and fixing stainless steel (Grade 304) frame made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size with suitable arrangement complete all as spd and as directed by Engr-in-Charge. |
| 96 | Supply and fixRATROradium sheet / tape on stainless steel frame (size of board / samples of letter / pictures / writing will be provided by Engineer-in-charge and of best quality as approved by GE complete all as specified and as directed. Note : Stainless Steel sheet will be measured and paid seprately under appropriate items. |
| 97 | S&F 2/3 mm thick Aluminium Composite pannel sheet best quality complete all as spd and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
