Tender For Replacement Of Existing Damaged 250Mm Dia Ac Pipes Into 250Mm Dia Di K7 Pipes From Raja Nagar Oht To Gandhi Road
Tender Value
26.42 Lakhs
Estimated cost
Bid Submission
28 Jun 2023
0 days left
EMD
26420
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kallakurichi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Replacement Of Existing Damaged 250Mm Dia Ac Pipes Into 250Mm Dia Di K7 Pipes From Raja Nagar Oht To Gandhi Road
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers. Hard stiff clay, stiff black cotton, hard red earth, shales, murram gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil.SS20B inclusive of baling out water and cleaning and levelling the site etc., complete |
| 2 | Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 3 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 4 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed |
| 5 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
| 6 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers |
| 7 | Manifacturing Supplying and Fixing of Precast RCC Slab of following thickness in RCC M20 concrete using 20mm size HBG Jelly excluding cost and conveyance charges etc., complete as per standard specification |
| 8 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 9 | Supplying and Delivery of 250 mm dia DI K7 PIPE WITH EXCISE DUTY AS PER IS 8329 / 2000 includind all cost of materials and other chrges etc complete complying with standard Specifications |
| 10 | Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron ofGrade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 ORing protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 - 150mm DI D/F GATE VALVES |
| 11 | Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron ofGrade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 ORing protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 - 100mm DI D/F GATE VALVES |
| 12 | Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron ofGrade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 ORing protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 - 250mm DI D/F GATE VALVES |
| 13 | DUCTILE IRON SPECIALS AS PER IS 9523/2000 - ALL SOCKET (Sockets, Flanged Sockets) - 250 mm - 300 mm Dia |
| 14 | DUCTILE IRON SPECIALS AS PER IS 9523/2000 - ALL FLANGE (Flanged Pipe Nipple) 250 mm - 300 mm dia |
| 15 | DUCTILE IRON SPECIALS AS PER IS 9523/2000 - ALL Specials Like Bend, Duckfoot Bend & etc., 250 mm - 300 mm dia |
| 16 | Lowering 250 mm dia K7 DI Pipe and Specials in the trenches and laying toproper grade and alignment and as directed by the Department Officers - 250 mm dia D.I Pipes and Specials |
| 17 | Jointing of D.I Pipes and specials with rubber gaskets (Tyton Joint) including cost of lubricants. (including cost of jointing materials) as Directed by the Department Officers - For Depth upto 2m - 100 mm dia D.I Pipes and Specials |
| 18 | Jointing of D.I Pipes and specials with rubber gaskets (Tyton Joint) including cost of lubricants. (including cost of jointing materials) as Directed by the Department Officers - For Depth upto 2m - 150 mm dia D.I Pipes and Specials |
| 19 | Jointing of D.I Pipes and specials with rubber gaskets (Tyton Joint) including cost of lubricants. (including cost of jointing materials) as Directed by the Department Officers - For Depth upto 2m - 250 mm dia D.I Pipes and Specials |
| 20 | Refilling with excavated soil (other than sand) complying with the standard specification for filling in foundation and basement including all cost and conveyance, watered and compacted etc., complete complying with standard specification. |
| 21 | Goods and Service Tax @ 18% |
AI Tender Summary
Tender Timeline
Jun 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 28, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender