|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 2 | Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900 |
| 3 | Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 4 | Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev V Specifications |
| 5 | Providing and laying tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications |
| 6 | Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24 cum of 26.50-13.20mm, 0..25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20 Kgs of VG30/ VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sectionsandcompacted byVibratory / Pneumatic Roller to the required density etc.,including labour for attending to paver at site etc., including hire charges and fuelcharges for 20-30 t CMPwith bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, includingfuel and all other incidentalcharges etc., complete as per specificationusing CMP as per clause 505 MORTH Rev-5 |
| 7 | Providing and laying Bituminous Concrete upto 30 mm thick using 0.13 cum of 19.00-9.50mm, graded metal0.17 cum of 9.50-2.36mm graded metgal and 0.26 cum of 2.36 and below metal by adding the shredded plasticwaste over the aggregate heated to 170 degree celcious in the centeral hot mix plant, mixed well with 45.27 Kgs of hot bitumen VG30 Bitumen (160 degree celcious) 60/70 grade for premixing per 10sqm to lay 30mm compacted thick of bituminious concrete includeding the cost of materials ( the cost of Municipality / Corporation plastic waste obtained by the contractor from the Municipality / Corporation will be recovered)and conveyance of all materials to CMP site, heating the bitumen and agregates to the required tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required tempereature for uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 80-100 KN Vibratory roller / Pneumatic roller to therequired density etc., includinglabour for loading bitumen in to bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel charges for 20-30 TCMP with bitumen boiler, tipper trucks, paver finisher/9m paver finisher, Vibratory/pneumatic rollers and all other tools and plants required, including all other incidental charges etc., complete as per specification using CMP clause 507 of MORTH REV -5 Specifications. |
| 8 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250grams per sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35.The finished surface to be level uniform and free form streaks and holes etc., complete(as per MORT & H specification No.803) |
| 9 | Providingand fixing of road stud 100x100mm diecast in aluminium ressistance to corrosive effect of sait and grift fitted eithlenes reflected instaled in concrete or asphalts surface by drilling hole 30mm up to a depth of 60mm and beded in a suitable bitumensgrout are epoxy mortar etc.complete as per BS (part) 1973 |
| 10 | Manufacturingsupply& fixing of Retro -Reflective Road name sign board single arrow big size 36\"\"x48\"\" inchessize made out of wide angle cube corner micro prismatic grade sheeting confirming to IRC 67:2012& TYPE XI standard of ASTMD4956-09 specifications and fixed over 2mm thick aluminium sheet & back support frame of stainless steel supported by 32 NB stainless steel pipe all around and 65 NB pipe vertical post firmaly fixed to the ground by means of property designed foundation with M15 grade cement concrete 30cmx30cmx45cm complete.The information message shall be made out of cut out letters in blue color transparent overlay film as per IRC 67-2012Gidelines,7 years pre qualifications warrenty for Retro -Reflective sheeting from the origional sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the reflective sheeting offered shall be submitted by the contractor including cost of all materialsand labour charges etc.complete |
